Summary:
This eliminates the boilerplate implementation of the iterator interface in
mapped_iterator.
This patch also adds unit tests that verify that the mapped function is applied
by operator* and operator->, and that references returned by the map function
are returned via operator*.
Reviewers: dblaikie, chandlerc
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D39855
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317902 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I want to leverage this to clean up some of the code in clang. This will allow us to simplify D39521 which was trying to do some of the same.
If we accurately keep the code in Host.cpp synced with new CPUs added to compile-rt/libgcc we should be able to use this file as a proxy for what's implemented in the libraries.
The entries for the CPUs recognized by the libraries use separate macros that define additional parameters like the name for __builtin_cpu_is and an alias string for the couple cases where __builtin_cpu_is accepts two different names.
All of the macros contain an ARCHNAME that is usually the same as the __builtin_cpu_is string, but sometimes isn't. This represents the name recognized by X86.td and -march.
I'm following the precedent set by ARM and AArch64 and adding this information to lib/Support/TargetParser.cpp
Reviewers: erichkeane, echristo, asbirlea
Reviewed By: echristo
Subscribers: llvm-commits, aemerson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39782
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317900 91177308-0d34-0410-b5e6-96231b3b80d8
* The method getRegAllocationHints() is now of bool type instead of void. If
true is returned, regalloc (AllocationOrder) will *only* try to allocate the
hints, as opposed to merely trying them before non-hinted registers.
* TargetRegisterInfo::getRegAllocationHints() is implemented for SystemZ with
an increase in number of LOCRs.
In this case, it is desired to force the hints even though there is a slight
increase in spilling, because if a non-hinted register would be allocated,
the LOCRMux pseudo would have to be expanded with a jump sequence. The LOCR
(Load On Condition) SystemZ instruction must have both operands in either the
low or high part of the 64 bit register.
Reviewers: Quentin Colombet and Ulrich Weigand
https://reviews.llvm.org/D36795
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317879 91177308-0d34-0410-b5e6-96231b3b80d8
Whenever LLVM_ENABLE_ABI_BREAKING_CHECKS is enabled, which
is usually the case for example when asserts are enabled,
Error's destructor does some additional checking to make sure
that that it does not represent an error condition and that it
was checked.
However, this is -- by definition -- not the likely codepath.
Some profiling shows that at least with some compilers, simply
calling assertIsChecked -- in a release build with full
optimizations -- can account for up to 15% of the entire
runtime of the program, even though this function should almost
literally be a no-op.
The problem is that the assertIsChecked function can be considered
too big to inline depending on the compiler's inliner. Since it's
unlikely to ever need to failure path though, we can move it out
of line and force it to not be inlined, so that the fast path
can be inlined.
In my test (using lld to link clang with CMAKE_BUILD_TYPE=Release
and LLVM_ENABLE_ASSERTIONS=ON), this reduces link time from 27
seconds to 23.5 seconds, which is a solid 15% gain.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317824 91177308-0d34-0410-b5e6-96231b3b80d8
I think we need to use different builtins for the FMA4 instructions since those instructions zero the upper bits and FMA3 instructions pass the bits through.
So this moves the existing builtins to be the FMA3 versions. New versions will be added for FMA4.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317765 91177308-0d34-0410-b5e6-96231b3b80d8
The classof implementation in MaskedGatherScatterSDNode doesn't consider X86MaskedGatherSDNode so its misleading.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317733 91177308-0d34-0410-b5e6-96231b3b80d8
In Rust, a trait can be implemented for any type, and if a trait
object pointer is used for the type, then a virtual table will be
emitted for that trait/type combination.
We would like debuggers to be able to inspect trait objects, which
requires finding the concrete type associated with a given vtable.
This patch changes LLVM so that any type can be passed to
replaceVTableHolder. This allows the Rust compiler to emit the needed
debug info -- associating a vtable with the concrete type for which it
was emitted.
This is a DWARF extension: DWARF only specifies the meaning of
DW_AT_containing_type in one specific situation. This style of DWARF
extension is routine, though, and LLVM already has one such case for
DW_AT_containing_type.
Patch by Tom Tromey!
Differential Revision: https://reviews.llvm.org/D39503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317730 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements Chandler's idea [0] for supporting languages that
require support for infinite loops with side effects, such as Rust, providing
part of a solution to bug 965 [1].
Specifically, it adds an `llvm.sideeffect()` intrinsic, which has no actual
effect, but which appears to optimization passes to have obscure side effects,
such that they don't optimize away loops containing it. It also teaches
several optimization passes to ignore this intrinsic, so that it doesn't
significantly impact optimization in most cases.
As discussed on llvm-dev [2], this patch is the first of two major parts.
The second part, to change LLVM's semantics to have defined behavior
on infinite loops by default, with a function attribute for opting into
potential-undefined-behavior, will be implemented and posted for review in
a separate patch.
[0] http://lists.llvm.org/pipermail/llvm-dev/2015-July/088103.html
[1] https://bugs.llvm.org/show_bug.cgi?id=965
[2] http://lists.llvm.org/pipermail/llvm-dev/2017-October/118632.html
Differential Revision: https://reviews.llvm.org/D38336
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317729 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r317579, originally committed as r317100.
There is a design issue with marking CFI instructions duplicatable. Not
all targets support the CFIInstrInserter pass, and targets like Darwin
can't cope with duplicated prologue setup CFI instructions. The compact
unwind info emission fails.
When the following code is compiled for arm64 on Mac at -O3, the CFI
instructions end up getting tail duplicated, which causes compact unwind
info emission to fail:
int a, c, d, e, f, g, h, i, j, k, l, m;
void n(int o, int *b) {
if (g)
f = 0;
for (; f < o; f++) {
m = a;
if (l > j * k > i)
j = i = k = d;
h = b[c] - e;
}
}
We get assembly that looks like this:
; BB#1: ; %if.then
Lloh3:
adrp x9, _f@GOTPAGE
Lloh4:
ldr x9, [x9, _f@GOTPAGEOFF]
mov w8, wzr
Lloh5:
str wzr, [x9]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.lt LBB0_3
b LBB0_7
LBB0_2: ; %entry.if.end_crit_edge
Lloh6:
adrp x8, _f@GOTPAGE
Lloh7:
ldr x8, [x8, _f@GOTPAGEOFF]
Lloh8:
ldr w8, [x8]
stp x20, x19, [sp, #-16]! ; 8-byte Folded Spill
.cfi_def_cfa_offset 16
.cfi_offset w19, -8
.cfi_offset w20, -16
cmp w8, w0
b.ge LBB0_7
LBB0_3: ; %for.body.lr.ph
Note the multiple .cfi_def* directives. Compact unwind info emission
can't handle that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317726 91177308-0d34-0410-b5e6-96231b3b80d8
Previously, hasSideEffects was ? for TargetOpcode::PHI and would be inferred
as 1. D37065 sets the previously inferred properties explicitly. This patch sets
hasSideEffects=0 for PHI, as it is for G_PHI. MachineInstr::isSafeToMove has
been updated so it still returns false for PHI.
Additionally, HexagonBitSimplify relied on a PHI node having the
hasUnmodeledSideEffects property. This patch fixes that assumption.
Differential Revision: https://reviews.llvm.org/D37097
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317721 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This fragment emits a symbol ID and will be useful for more than just Safe SEH
tables (e.g., I plan to re-use it for Control Flow Guard tables). This is
simply a rename refactor.
Reviewers: rnk
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39770
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317703 91177308-0d34-0410-b5e6-96231b3b80d8
rL162640 introduced CodeGenTarget::guessInstructionProperties. If a target
sets guessInstructionProperties=0 in its FooInstrInfo, tablegen will error if
it has to guess properties from patterns. Unfortunately,
guessInstructionProperties=0 can't be used with current upstream LLVM as
instructions in the TargetOpcode namespace are always included and sometimes
have inferred properties for mayLoad, mayStore, and hasSideEffects. This patch
provides the simplest possible fix to this problem, setting default values for
these fields in the TargetOpcode scope. There is no intended functional
change, as the explicitly set properties should match what was previously
inferred. A number of the instructions had hasSideEffects=1 inferred
unintentionally. This patch makes it explicit, while future patches (such as
D37097) correct the property.
Differential Revision: https://reviews.llvm.org/D37065
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317674 91177308-0d34-0410-b5e6-96231b3b80d8
Some of the AMDGPU stack addressing modes require knowing the sign
bit is zero. We used to accomplish this by custom lowering
frame indexes, and then putting an AssertZext around a
TargetFrameIndex. This required specifically looking for
the AssextZext + frame index pattern which was moderately
disgusting. The same could probably be accomplished
with a target specific node, but would still
require special handling of frame indexes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317671 91177308-0d34-0410-b5e6-96231b3b80d8
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317647 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This just seems to have been an oversight. We already supported the f64
atomic add with an explicit scope (e.g. "cta"), but not the scopeless
version.
Reviewers: tra
Subscribers: jholewinski, sanjoy, cfe-commits, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317623 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Extends SCL functionality to allow users to find the line number in the file the SCL is built from through SpecialCaseList::inSectionBlame(...).
Also removes the need to compile the SCL before use. As the matcher now contains a list of regexes to test against instead of a single regex, the regexes can be individually built on each insertion rather than one large compilation at the end of construction.
This change also fixes a bug where blank lines would cause the parser to become out-of-sync with the line number. An error on line `k` was being reported as being on line `k - num_blank_lines_before_k`.
Note: This change has a cyclical dependency on D39486. Both these changes must be submitted at the same time to avoid a build breakage.
Reviewers: vlad.tsyrklevich
Reviewed By: vlad.tsyrklevich
Subscribers: kcc, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D39485
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317617 91177308-0d34-0410-b5e6-96231b3b80d8
Reland r317100 with minor fix regarding ComputeCommonTailLength function in
BranchFolding.cpp. Skipping top CFI instructions block needs to executed on
several more return points in ComputeCommonTailLength().
Original r317100 message:
"Correct dwarf unwind information in function epilogue for X86"
This patch aims to provide correct dwarf unwind information in function
epilogue for X86.
It consists of two parts. The first part inserts CFI instructions that set
appropriate cfa offset and cfa register in emitEpilogue() in
X86FrameLowering. This part is X86 specific.
The second part is platform independent and ensures that:
- CFI instructions do not affect code generation
- Unwind information remains correct when a function is modified by
different passes. This is done in a late pass by analyzing information
about cfa offset and cfa register in BBs and inserting additional CFI
directives where necessary.
Changed CFI instructions so that they:
- are duplicable
- are not counted as instructions when tail duplicating or tail merging
- can be compared as equal
Added CFIInstrInserter pass:
- analyzes each basic block to determine cfa offset and register valid at
its entry and exit
- verifies that outgoing cfa offset and register of predecessor blocks match
incoming values of their successors
- inserts additional CFI directives at basic block beginning to correct the
rule for calculating CFA
Having CFI instructions in function epilogue can cause incorrect CFA
calculation rule for some basic blocks. This can happen if, due to basic
block reordering, or the existence of multiple epilogue blocks, some of the
blocks have wrong cfa offset and register values set by the epilogue block
above them.
CFIInstrInserter is currently run only on X86, but can be used by any target
that implements support for adding CFI instructions in epilogue.
Patch by Violeta Vukobrat.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317579 91177308-0d34-0410-b5e6-96231b3b80d8
This changes the interface of how targets describe how to legalize, see
the below description.
1. Interface for targets to describe how to legalize.
In GlobalISel, the API in the LegalizerInfo class is the main interface
for targets to specify which types are legal for which operations, and
what to do to turn illegal type/operation combinations into legal ones.
For each operation the type sizes that can be legalized without having
to change the size of the type are specified with a call to setAction.
This isn't different to how GlobalISel worked before. For example, for a
target that supports 32 and 64 bit adds natively:
for (auto Ty : {s32, s64})
setAction({G_ADD, 0, s32}, Legal);
or for a target that needs a library call for a 32 bit division:
setAction({G_SDIV, s32}, Libcall);
The main conceptual change to the LegalizerInfo API, is in specifying
how to legalize the type sizes for which a change of size is needed. For
example, in the above example, how to specify how all types from i1 to
i8388607 (apart from s32 and s64 which are legal) need to be legalized
and expressed in terms of operations on the available legal sizes
(again, i32 and i64 in this case). Before, the implementation only
allowed specifying power-of-2-sized types (e.g. setAction({G_ADD, 0,
s128}, NarrowScalar). A worse limitation was that if you'd wanted to
specify how to legalize all the sized types as allowed by the LLVM-IR
LangRef, i1 to i8388607, you'd have to call setAction 8388607-3 times
and probably would need a lot of memory to store all of these
specifications.
Instead, the legalization actions that need to change the size of the
type are specified now using a "SizeChangeStrategy". For example:
setLegalizeScalarToDifferentSizeStrategy(
G_ADD, 0, widenToLargerAndNarrowToLargest);
This example indicates that for type sizes for which there is a larger
size that can be legalized towards, do it by Widening the size.
For example, G_ADD on s17 will be legalized by first doing WidenScalar
to make it s32, after which it's legal.
The "NarrowToLargest" indicates what to do if there is no larger size
that can be legalized towards. E.g. G_ADD on s92 will be legalized by
doing NarrowScalar to s64.
Another example, taken from the ARM backend is:
for (unsigned Op : {G_SDIV, G_UDIV}) {
setLegalizeScalarToDifferentSizeStrategy(Op, 0,
widenToLargerTypesUnsupportedOtherwise);
if (ST.hasDivideInARMMode())
setAction({Op, s32}, Legal);
else
setAction({Op, s32}, Libcall);
}
For this example, G_SDIV on s8, on a target without a divide
instruction, would be legalized by first doing action (WidenScalar,
s32), followed by (Libcall, s32).
The same principle is also followed for when the number of vector lanes
on vector data types need to be changed, e.g.:
setAction({G_ADD, LLT::vector(8, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(16, 8)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(8, 16)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(2, 32)}, LegalizerInfo::Legal);
setAction({G_ADD, LLT::vector(4, 32)}, LegalizerInfo::Legal);
setLegalizeVectorElementToDifferentSizeStrategy(
G_ADD, 0, widenToLargerTypesUnsupportedOtherwise);
As currently implemented here, vector types are legalized by first
making the vector element size legal, followed by then making the number
of lanes legal. The strategy to follow in the first step is set by a
call to setLegalizeVectorElementToDifferentSizeStrategy, see example
above. The strategy followed in the second step
"moreToWiderTypesAndLessToWidest" (see code for its definition),
indicating that vectors are widened to more elements so they map to
natively supported vector widths, or when there isn't a legal wider
vector, split the vector to map it to the widest vector supported.
Therefore, for the above specification, some example legalizations are:
* getAction({G_ADD, LLT::vector(3, 3)})
returns {WidenScalar, LLT::vector(3, 8)}
* getAction({G_ADD, LLT::vector(3, 8)})
then returns {MoreElements, LLT::vector(8, 8)}
* getAction({G_ADD, LLT::vector(20, 8)})
returns {FewerElements, LLT::vector(16, 8)}
2. Key implementation aspects.
How to legalize a specific (operation, type index, size) tuple is
represented by mapping intervals of integers representing a range of
size types to an action to take, e.g.:
setScalarAction({G_ADD, LLT:scalar(1)},
{{1, WidenScalar}, // bit sizes [ 1, 31[
{32, Legal}, // bit sizes [32, 33[
{33, WidenScalar}, // bit sizes [33, 64[
{64, Legal}, // bit sizes [64, 65[
{65, NarrowScalar} // bit sizes [65, +inf[
});
Please note that most of the code to do the actual lowering of
non-power-of-2 sized types is currently missing, this is just trying to
make it possible for targets to specify what is legal, and how non-legal
types should be legalized. Probably quite a bit of further work is
needed in the actual legalizing and the other passes in GlobalISel to
support non-power-of-2 sized types.
I hope the documentation in LegalizerInfo.h and the examples provided in the
various {Target}LegalizerInfo.cpp and LegalizerInfoTest.cpp explains well
enough how this is meant to be used.
This drops the need for LLT::{half,double}...Size().
Differential Revision: https://reviews.llvm.org/D30529
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317560 91177308-0d34-0410-b5e6-96231b3b80d8
We can't safely split arithmetic into multiple fragments because we
can't express carry-over between fragments.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317534 91177308-0d34-0410-b5e6-96231b3b80d8
This makes DILocation::getMergedLocation() do what its comment says it
does when merging locations for an Instruction: set the common inlineAt
scope. This simplifies Instruction::applyMergedLocation() a bit.
Testing: check-llvm, check-clang
Differential Revision: https://reviews.llvm.org/D39628
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317524 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Print %subreg.<subregidxname> instead of just the subregister
index when printing immediate operands corresponding to subreg
indices in INSERT_SUBREG, EXTRACT_SUBREG, SUBREG_TO_REG and
REG_SEQUENCE.
Reviewers: qcolombet, MatzeB
Reviewed By: MatzeB
Subscribers: nhaehnle, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D39696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317513 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2016-November/107104.html
and again more recently:
http://lists.llvm.org/pipermail/llvm-dev/2017-October/118118.html
...this is a step in cleaning up our fast-math-flags implementation in IR to better match
the capabilities of both clang's user-visible flags and the backend's flags for SDNode.
As proposed in the above threads, we're replacing the 'UnsafeAlgebra' bit (which had the
'umbrella' meaning that all flags are set) with a new bit that only applies to algebraic
reassociation - 'AllowReassoc'.
We're also adding a bit to allow approximations for library functions called 'ApproxFunc'
(this was initially proposed as 'libm' or similar).
...and we're out of bits. 7 bits ought to be enough for anyone, right? :) FWIW, I did
look at getting this out of SubclassOptionalData via SubclassData (spacious 16-bits),
but that's apparently already used for other purposes. Also, I don't think we can just
add a field to FPMathOperator because Operator is not intended to be instantiated.
We'll defer movement of FMF to another day.
We keep the 'fast' keyword. I thought about removing that, but seeing IR like this:
%f.fast = fadd reassoc nnan ninf nsz arcp contract afn float %op1, %op2
...made me think we want to keep the shortcut synonym.
Finally, this change is binary incompatible with existing IR as seen in the
compatibility tests. This statement:
"Newer releases can ignore features from older releases, but they cannot miscompile
them. For example, if nsw is ever replaced with something else, dropping it would be
a valid way to upgrade the IR."
( http://llvm.org/docs/DeveloperPolicy.html#ir-backwards-compatibility )
...provides the flexibility we want to make this change without requiring a new IR
version. Ie, we're not loosening the FP strictness of existing IR. At worst, we will
fail to optimize some previously 'fast' code because it's no longer recognized as
'fast'. This should get fixed as we audit/squash all of the uses of 'isFast()'.
Note: an inter-dependent clang commit to use the new API name should closely follow
commit.
Differential Revision: https://reviews.llvm.org/D39304
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317488 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a way to mark GlobalValues as local we can use the symbol
resolutions that the linker plugin provides as part of lto/thinlto link
step to refine the compilers view on what symbols will end up being local.
Originally commited as r317374, but reverted in r317395 to update some missed
tests.
Differential Revision: https://reviews.llvm.org/D35702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317408 91177308-0d34-0410-b5e6-96231b3b80d8
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317379 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have a way to mark GlobalValues as local we can use the symbol
resolutions that the linker plugin provides as part of lto/thinlto link
step to refine the compilers view on what symbols will end up being local.
Differential Revision: https://reviews.llvm.org/D35702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317374 91177308-0d34-0410-b5e6-96231b3b80d8
This class was split between libIR and libSupport, which breaks under
modular code generation. Move it into the one library that uses it,
ProfileData, to resolve this issue.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317366 91177308-0d34-0410-b5e6-96231b3b80d8
This recommit r317351 after fixing a buildbot failure.
Original commit message:
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317362 91177308-0d34-0410-b5e6-96231b3b80d8
DenseMaps require the definition of a type to be available when using a
pointer to that type as a key to know how many bits are available for
tombstone/etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317360 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
Reviewers: davidxl, huntergr, chandlerc, mcrosier, eraman, davide
Reviewed By: davidxl
Subscribers: sdesmalen, ashutosh.nema, fhahn, mssimpso, aemerson, mgorny, mehdi_amini, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D39137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317351 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Also added a reserve() method to MapVector since we want to use that from
ADCE.
DenseMap does not provide deterministic iteration order so with that
we will handle the members of BlockInfo in random order, eventually
leading to random order of the blocks in the predecessor lists.
Without this change, I get the same predecessor order in about 90% of the
time when I compile a certain reproducer and in 10% I get a different one.
No idea how to make a proper test case for this.
Reviewers: kuhar, david2050
Reviewed By: kuhar
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317323 91177308-0d34-0410-b5e6-96231b3b80d8
mir-canon (MIRCanonicalizerPass) is a pass designed to reorder instructions and
rename operands so that two similar programs will diff more cleanly after being
run through mir-canon than they would otherwise. This project is still a work
in progress and there are ideas still being discussed for improving diff
quality.
M include/llvm/InitializePasses.h
M lib/CodeGen/CMakeLists.txt
M lib/CodeGen/CodeGen.cpp
A lib/CodeGen/MIRCanonicalizerPass.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317285 91177308-0d34-0410-b5e6-96231b3b80d8
