We would eventually catch these via demanded bits and computing known bits in InstCombine,
but I think it's better to handle the simple cases as soon as possible as a matter of efficiency.
This fold allows further simplifications based on distributed ops transforms. eg:
%a = lshr i8 %x, 7
%b = or i8 %a, 2
%c = and i8 %b, 1
InstSimplify can directly fold this now:
%a = lshr i8 %x, 7
Differential Revision: https://reviews.llvm.org/D33221
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303213 91177308-0d34-0410-b5e6-96231b3b80d8
The issue was that the AArch64 TTI hook allowed unpacked integer cmp reductions
which didn't have a lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303211 91177308-0d34-0410-b5e6-96231b3b80d8
Update threshold based on callee's hotness only when BFI is not available.
Otherwise use only callsite's hotness. This makes it easier to reason about
hotness related threshold updates.
Differential revision: https://reviews.llvm.org/D33157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303210 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
RewritePHIs algorithm used in building of CoroFrame inserts a placeholder
```
%placeholder = phi [%val]
```
on every edge leading to a block starting with PHI node with multiple incoming edges,
so that if one of the incoming values was spilled and need to be reloaded, we have a
place to insert a reload. We use SplitEdge helper function to split the incoming edge.
SplitEdge function does not deal with unwind edges comping into a block with an EHPad.
This patch adds an ehAwareSplitEdge function that can correctly split the unwind edge.
For landing pads, we clone the landing pad into every edge block and replace the original
landing pad with a PHI collection the values from all incoming landing pads.
For WinEH pads, we keep the original EHPad in place and insert cleanuppad/cleapret in the
edge blocks.
Reviewers: majnemer, rnk
Reviewed By: majnemer
Subscribers: EricWF, llvm-commits
Differential Revision: https://reviews.llvm.org/D31845
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303172 91177308-0d34-0410-b5e6-96231b3b80d8
ARM Neon has native support for half-sized vector registers (64 bits). This
is beneficial for example for 2D and 3D graphics. This patch adds the option
to lower MinVecRegSize from 128 via a TTI in the SLP Vectorizer.
*** Performance Analysis
This change was motivated by some internal benchmarks but it is also
beneficial on SPEC and the LLVM testsuite.
The results are with -O3 and PGO. A negative percentage is an improvement.
The testsuite was run with a sample size of 4.
** SPEC
* CFP2006/482.sphinx3 -3.34%
A pretty hot loop is SLP vectorized resulting in nice instruction reduction.
This used to be a +22% regression before rL299482.
* CFP2000/177.mesa -3.34%
* CINT2000/256.bzip2 +6.97%
My current plan is to extend the fix in rL299482 to i16 which brings the
regression down to +2.5%. There are also other problems with the codegen in
this loop so there is further room for improvement.
** LLVM testsuite
* SingleSource/Benchmarks/Misc/ReedSolomon -10.75%
There are multiple small SLP vectorizations outside the hot code. It's a bit
surprising that it adds up to 10%. Some of this may be code-layout noise.
* MultiSource/Benchmarks/VersaBench/beamformer/beamformer -8.40%
The opt-viewer screenshot can be seen at F3218284. We start at a colder store
but the tree leads us into the hottest loop.
* MultiSource/Applications/lambda-0.1.3/lambda -2.68%
* MultiSource/Benchmarks/Bullet/bullet -2.18%
This is using 3D vectors.
* SingleSource/Benchmarks/Shootout-C++/Shootout-C++-lists +6.67%
Noise, binary is unchanged.
* MultiSource/Benchmarks/Ptrdist/anagram/anagram +4.90%
There is an additional SLP in the cold code. The test runs for ~1sec and
prints out over 2000 lines. This is most likely noise.
* MultiSource/Applications/aha/aha +1.63%
* MultiSource/Applications/JM/lencod/lencod +1.41%
* SingleSource/Benchmarks/Misc/richards_benchmark +1.15%
Differential Revision: https://reviews.llvm.org/D31965
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303116 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR33053.
Original commit message:
> The new experimental reduction intrinsics can now be used, so I'm enabling this
> for AArch64. We will need this for SVE anyway, so it makes sense to do this for
> NEON reductions as well.
>
> The existing code to match shufflevector patterns are replaced with a direct
> lowering of the reductions to AArch64-specific nodes. Tests updated with the
> new, simpler, representation.
>
> Differential Revision: https://reviews.llvm.org/D32247
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303115 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The following loops should be recognized:
i = 0;
while (n) {
n = n >> 1;
i++;
body();
}
use(i);
And replaced with builtin_ctlz(n) if body() is empty or
for CPUs that have CTLZ instruction converted to countable:
for (j = 0; j < builtin_ctlz(n); j++) {
n = n >> 1;
i++;
body();
}
use(builtin_ctlz(n));
Reviewers: rengolin, joerg
Differential Revision: http://reviews.llvm.org/D32605
From: Evgeny Stupachenko <evstupac@gmail.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303102 91177308-0d34-0410-b5e6-96231b3b80d8
verifyMemoryCongruency() filters out trivially dead MemoryDef(s),
as we find them immediately dead, before moving from TOP to a new
congruence class.
This fixes the same problem for PHI(s) skipping MemoryPhis if all
the operands are dead.
Differential Revision: https://reviews.llvm.org/D33044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303100 91177308-0d34-0410-b5e6-96231b3b80d8
One didn't correctly fine the regex variable, the other still had a RUN
line for FNOBUILTIN-checks, which weren't copied to the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303025 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If the Worklist build causes an IR change this change flag currently factors into the flag for running another iteration of the iteration loop. But only changes during processing should trigger another loop.
This patch captures the worklist creation change flag into the outside the loop flag currently used for DbgDeclares and only sends that flag up to the caller. Rerunning the loop only depends on IC.run() now.
This uses the debug output of InstCombine to determine if one or two iterations run. I couldn't think of a better way to detect it since the second spurious iteration shoudn't make any visible changes. Just wasted computation.
I can do a pre-commit of the test case with the CHECK-NOT as a CHECK if this is an ok way to check this.
This is a subset of D31678 as I'm still not sure how to verify the analysis behavior for that.
Reviewers: davide, majnemer, spatel, chandlerc
Reviewed By: davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D32453
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302982 91177308-0d34-0410-b5e6-96231b3b80d8
Tests with target intrinsics are inherently target specific, so it
doesn't actually make sense to run them if we've excluded their
target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302979 91177308-0d34-0410-b5e6-96231b3b80d8
I bet the change is correct but this test seems to expose some underlying
problem that manifest only on some buildbots, and I'm not able to reproduce
locally. Unfortunately I can't debug right now but I don't want to annoy
people with spurious failures, so I'll XFAIL until I can take a look (over
the weekend).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302976 91177308-0d34-0410-b5e6-96231b3b80d8
invariant PHI inputs and to rewrite PHI nodes during the actual
unswitching.
The checking is quite easy, but rewriting the PHI nodes is somewhat
surprisingly challenging. This should handle both branches and switches.
I think this is now a full featured trivial unswitcher, and more full
featured than the trivial cases in the old pass while still being (IMO)
somewhat simpler in how it works.
Next up is to verify its correctness in more widespread testing, and
then to add non-trivial unswitching.
Thanks to Davide and Sanjoy for the excellent review. There is one
remaining question that I may address in a follow-up patch (see the
review thread for details) but it isn't related to the functionality
specifically.
Differential Revision: https://reviews.llvm.org/D32699
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302867 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Don't use the metadata on call instructions for determining hotness
unless we are in sample PGO mode, where it is needed because profile
counts are not accurate. In instrumentation mode this is not necessary
and does more harm than good when calls have VP metadata that hasn't
been properly scaled after transformations or dropped after constant
prop based devirtualization (both should be fixed, but we don't need
to do this in the first place for instrumentation PGO).
This required adjusting a number of tests to distinguish between sample
and instrumentation PGO handling, and to add in profile summary metadata
so that getProfileCount can get the summary.
Reviewers: davidxl, danielcdh
Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D32877
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302844 91177308-0d34-0410-b5e6-96231b3b80d8
I ran the test-suite (including SPEC 2006) in PGO mode comparing cold
thresholds of 225 and 45. Here are some stats on the text size:
Out of 904 tests that ran, 197 see a change in text size. The average
text size reduction (of all the 904 binaries) is 1.07%. Of the 197
binaries, 19 see a text size increase, as high as 18%, but most of them
are small single source benchmarks. There are 3 multisource benchmarks
with a >0.5% size increase (0.7, 1.3 and 2.1 are their % increases). On
the other side of the spectrum, 31 benchmarks see >10% size reduction
and 6 of them are MultiSource.
I haven't run the test-suite with other values of inlinecold-threshold.
Since we have a cold callsite threshold of 45, I picked this value.
Differential revision: https://reviews.llvm.org/D33106
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302829 91177308-0d34-0410-b5e6-96231b3b80d8
The approach I followed was to emit the remark after getTreeCost concludes
that SLP is profitable. I initially tried emitting them after the
vectorizeRootInstruction calls in vectorizeChainsInBlock but I vaguely
remember missing a few cases for example in HorizontalReduction::tryToReduce.
ORE is placed in BoUpSLP so that it's available from everywhere (notably
HorizontalReduction::tryToReduce).
We use the first instruction in the root bundle as the locator for the remark.
In order to get a sense how far the tree is spanning I've include the size of
the tree in the remark. This is not perfect of course but it gives you at
least a rough idea about the tree. Then you can follow up with -view-slp-tree
to really see the actual tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302811 91177308-0d34-0410-b5e6-96231b3b80d8
// (X ^ C1) | C2 --> (X | C2) ^ (C1&~C2)
This canonicalization was added at:
https://reviews.llvm.org/rL7264
By moving xors out/down, we can more easily combine constants. I'm adding
tests that do not change with this patch, so we can verify that those kinds
of transforms are still happening.
This is no-functional-change-intended because there's a later fold:
// (X^C)|Y -> (X|Y)^C iff Y&C == 0
...and demanded-bits appears to guarantee that any fold that would have
hit the fold we're removing here would be caught by that 2nd fold.
Similar reasoning was used in:
https://reviews.llvm.org/rL299384
The larger motivation for removing this code is that it could interfere with
the fix for PR32706:
https://bugs.llvm.org/show_bug.cgi?id=32706
Ie, we're not checking if the 'xor' is actually a 'not', so we could reverse
a 'not' optimization and cause an infinite loop by altering an 'xor X, -1'.
Differential Revision: https://reviews.llvm.org/D33050
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302733 91177308-0d34-0410-b5e6-96231b3b80d8
Surprisingly, I don't think these are redundant for InstSimplify.
They were just misplaced as InstCombine tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302684 91177308-0d34-0410-b5e6-96231b3b80d8
The new experimental reduction intrinsics can now be used, so I'm enabling this
for AArch64. We will need this for SVE anyway, so it makes sense to do this for
NEON reductions as well.
The existing code to match shufflevector patterns are replaced with a direct
lowering of the reductions to AArch64-specific nodes. Tests updated with the
new, simpler, representation.
Differential Revision: https://reviews.llvm.org/D32247
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302678 91177308-0d34-0410-b5e6-96231b3b80d8
The first test in this file is duplicated exactly in and.ll -> test33.
We have commuted and vector variants there too.
The second test is a composite of 2 folds. The first fold is tested
independently in add.ll -> flip_and_mask (including vector variant).
After that transform fires, the IR is identical to the first transform.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302676 91177308-0d34-0410-b5e6-96231b3b80d8
