Summary:
r319898 made it possible to override these variables via the
CROSS_TOOLCHAIN_FLAGS setting, but this only worked if one explicitly
specifies these variables there. If, instead, one uses
CROSS_TOOLCHAIN_FLAGS to specify a toolchain file (as our internal
builds do, to point cmake to a checked-in toolchain), the
CMAKE_C(XX)_COMPILER flags would still win over the ones specified by
the toolchain file.
To fix is to make the mere presence of these flags overridable. I do
this by putting them as a default value for the CROSS_TOOLCHAIN_FLAGS
setting, so they can be overridden at cmake configuration time.
Reviewers: hintonda, beanz
Subscribers: bogner, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320138 91177308-0d34-0410-b5e6-96231b3b80d8
The header include was required to work around PR19898, as noted in that
comment. That PR has since been marked resolved fixed, and the
configuration check passes without the header inclusion both when
compiling on Windows with cl and when cross-compiling on Linux using
clang-cl.
I noticed this because the inclusion was cased incorrectly (Intrin.h
instead of intrin.h), which when cross-compiling on a case sensitive
file system would cause the intrin.h from the Windows SDK to be included
(which LLVM can't handle) instead of the one from clang's resource
directory, making the check fail. This is the same issue as r309980.
Correcting the case of the inclusion makes the check pass when cross
compiling, but it seems better to get rid of the inclusion entirely,
since it appears to be unnecessary now.
Differential Revision: https://reviews.llvm.org/D40910
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319917 91177308-0d34-0410-b5e6-96231b3b80d8
they can be overridden when cross compiling.
Summary:
Since CROSS_TOOLCHAN_FLAGS can set CMAKE_(C|CXX)_COMPILER
variables, move the compiler variables up front so they can be
overridden.
This is a followup to https://reviews.llvm.org/D40229 committed in rL319620.
Thanks to Pavel Labath for reporting this issue.
Reviewers: labath, beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319898 91177308-0d34-0410-b5e6-96231b3b80d8
We currently use target_link_libraries without an explicit scope
specifier (INTERFACE, PRIVATE or PUBLIC) when linking executables.
Dependencies added in this way apply to both the target and its
dependencies, i.e. they become part of the executable's link interface
and are transitive.
Transitive dependencies generally don't make sense for executables,
since you wouldn't normally be linking against an executable. This also
causes issues for generating install export files when using
LLVM_DISTRIBUTION_COMPONENTS. For example, clang has a lot of LLVM
library dependencies, which are currently added as interface
dependencies. If clang is in the distribution components but the LLVM
libraries it depends on aren't (which is a perfectly legitimate use case
if the LLVM libraries are being built static and there are therefore no
run-time dependencies on them), CMake will complain about the LLVM
libraries not being in export set when attempting to generate the
install export file for clang. This is reasonable behavior on CMake's
part, and the right thing is for LLVM's build system to explicitly use
PRIVATE dependencies for executables.
Unfortunately, CMake doesn't allow you to mix and match the keyword and
non-keyword target_link_libraries signatures for a single target; i.e.,
if a single call to target_link_libraries for a particular target uses
one of the INTERFACE, PRIVATE, or PUBLIC keywords, all other calls must
also be updated to use those keywords. This means we must do this change
in a single shot. I also fully expect to have missed some instances; I
tested by enabling all the projects in the monorepo (except dragonegg),
and configuring both with and without shared libraries, on both Darwin
and Linux, but I'm planning to rely on the buildbots for other
configurations (since it should be pretty easy to fix those).
Even after this change, we still have a lot of target_link_libraries
calls that don't specify a scope keyword, mostly for shared libraries.
I'm thinking about addressing those in a follow-up, but that's a
separate change IMO.
Differential Revision: https://reviews.llvm.org/D40823
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319840 91177308-0d34-0410-b5e6-96231b3b80d8
Also pass CMAKE_(C|CXX)_COMPILER to add_custom_command.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319620 91177308-0d34-0410-b5e6-96231b3b80d8
Only pass Native to LLVM_TARGETS_TO_BUILD.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319574 91177308-0d34-0410-b5e6-96231b3b80d8
CMake's generated installation scripts support `CMAKE_INSTALL_DO_STRIP`
to enable stripping the installed binaries. LLVM's build system doesn't
expose this option to the `install-` targets, but it's useful in
conjunction with `install-distribution`.
Add a new function to create the install targets, which creates both the
regular install target and a second install target that strips during
installation. Change the creation of all installation targets to use
this new function. Stripping doesn't make a whole lot of sense for some
installation targets (e.g. the LLVM headers), but consistency doesn't
hurt.
I'll make other repositories (e.g. clang, compiler-rt) use this in a
follow-up, and then add an `install-distribution-stripped` target to
actually accomplish the end goal of creating a stripped distribution. I
don't want to do that step yet because the creation of that target would
depend on the presence of the `install-*-stripped` target for each
distribution component, and the distribution components from other
repositories will be missing that target right now.
Differential Revision: https://reviews.llvm.org/D40620
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319480 91177308-0d34-0410-b5e6-96231b3b80d8
Modify add_sphinx_target() to include the project name alongside builder
in Sphinx doctree directory. This aims to avoid crashes due to race
conditions between multiple Sphinx instances running in parallel that
attempt to create or read that directory simultaneously.
This problem has originally been addressed in r283188. However, that
commit presumed that there will be only one target per builder being
run. However, r314863 introduced a second manpage target, reintroducing
the race condition.
Differential Revision: https://reviews.llvm.org/D40656
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319461 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, reuse the code-path for cl.exe that adds /W4 , which for clang-cl
aliases clang's "-Wall -Wextra" which matches what clang-cl's /Wall
previously aliased.
This should restore the verbosity of a Windows selfhost build back to
its previous levels.
Differential Revision: https://reviews.llvm.org/D40603
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319330 91177308-0d34-0410-b5e6-96231b3b80d8
The ';' separators in LLVM_TARGETS_TO_BUILD disappear when list
variables are evaluated in custom commands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319268 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319176 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent unloading shared libraries on Linux when dlclose() is called.
This is necessary since command-line option parsing API relies on
registering the global option instances in the option parser instance
which can be loaded in a different shared library.
Given that we can't reliably remove those options when a library is
unloaded, the parser ends up containing dangling references. Since glibc
has relatively complex library unloading rules, some of the LLVM
libraries can be unloaded while others (including the Support library)
stay loaded causing quite a mayhem. To reliably prevent that, just
forbid unloading all libraries -- it's a very bad idea anyway.
While the issue arguably happens only with BUILD_SHARED_LIBS, it may
affect any library reusing llvm::cl interface.
Based on patch provided Ross Hayward on https://bugs.gentoo.org/617154.
Previously hit by Fedora back in Feb 2016:
https://lists.freedesktop.org/archives/mesa-dev/2016-February/107242.html
Differential Revision: https://reviews.llvm.org/D40459
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319105 91177308-0d34-0410-b5e6-96231b3b80d8
Prevent unloading shared libraries on Linux when dlclose() is called.
This is necessary since command-line option parsing API relies on
registering the global option instances in the option parser instance
which can be loaded in a different shared library.
Given that we can't reliably remove those options when a library is
unloaded, the parser ends up containing dangling references. Since glibc
has relatively complex library unloading rules, some of the LLVM
libraries can be unloaded while others (including the Support library)
stay loaded causing quite a mayhem. To reliably prevent that, just
forbid unloading all libraries -- it's a very bad idea anyway.
While the issue arguably happens only with BUILD_SHARED_LIBS, it may
affect any library reusing llvm::cl interface.
Based on patch provided Ross Hayward on https://bugs.gentoo.org/617154.
Previously hit by Fedora back in Feb 2016:
https://lists.freedesktop.org/archives/mesa-dev/2016-February/107242.html
Differential Revision: https://reviews.llvm.org/D40459
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319069 91177308-0d34-0410-b5e6-96231b3b80d8
In recent versions of Solaris 11.4 (previously 12), ld -V output went to
stdout instead of stderr. Since AddLLVM.cmake only expects it on stderr,
Solaris ld wasn't properly detected and options not understood by it are
passed during the build.
The following patch fixes this, allowing for both variants.
Tested on i386-pc-solaris2.11.4 (on top of D35755 which is needed for
proper Solaris support).
Patch by Rainer Orth.
Differential Revision: https://reviews.llvm.org/D39601
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318532 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318356 91177308-0d34-0410-b5e6-96231b3b80d8
- This deprecates LLVM_ENABLE_IR_PGO but keeps it around for now.
- Errors out when LLVM_BUILD_INSTRUMENTED and LLVM_BUILD_INSTRUMENTED_COVERAGE
are both set.
Motivated by bogner's post-commit review of r313770.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317725 91177308-0d34-0410-b5e6-96231b3b80d8
This was once needed so that multiple tablegen binaries don't compile
the library concurrently. However, this isn't needed anymore since
adding USES_TERMINAL to the custom_command.
This is supported by the fact that the target was only building
LLVMSupport since some cleanups a year ago. If this dependency had
really been needed, we would have seen complaints.
Differential Revision: https://reviews.llvm.org/D39299
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317695 91177308-0d34-0410-b5e6-96231b3b80d8
CMake does a poor job in tracking dependencies on files and directories
directly. Create custom target similar to the configuration step.
On my system, this avoids the reconfiguration on each build.
Differential Revision: https://reviews.llvm.org/D39298
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317694 91177308-0d34-0410-b5e6-96231b3b80d8
`check_linker_flags` currently sets the *compiler* flags (via
`CMAKE_REQUIRED_FLAGS`), and thus implicitly relies on cmake's default
behavior of passing the compiler flags to the linker. This breaks when
cmake's build rules have been altered to not pollute the link line with
compiler flags (which can be desirable for build cleanliness). Instead,
set `CMAKE_EXE_LINKER_FLAGS` explicitly and use `CMP0056` to ensure the
linker flags are passed along. Additionally, since we're inside a
function, we can just alter the variable directly (as the alteration
will be limited to the scope of the function) rather than saving and
restoring the old value.
Differential Revision: https://reviews.llvm.org/D39431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316972 91177308-0d34-0410-b5e6-96231b3b80d8
check_cxx_compiler_flag doesn't seem to try to link a program, so
the existing code doesn't correctly detect the availability of a given
linker. This patch uses check_cxx_source_compiles instead.
I confirmed that cmake now reports this error
Host compiler does not support '-fuse-ld=foo'
for -DLLVM_USE_LINKER=foo.
Differential Revision: https://reviews.llvm.org/D39274
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316958 91177308-0d34-0410-b5e6-96231b3b80d8
Fix linker not being correctly detected when a custom one is specified
through LLVM_USE_LINKER CMake variable.
In particular,
cmake -DCMAKE_BUILD_TYPE=Release -DLLVM_USE_LINKER=gold ../llvm
resulted into
Linker detection: GNU ld
instead of
Linker detection: GNU Gold
due to the construction not accounting for such variable. It led to the general
confusion and prevented setting linker-specific flags inside functions defined
in AddLLVM.cmake.
Thanks Oleksii Vilchanskyi for the patch!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316956 91177308-0d34-0410-b5e6-96231b3b80d8
gtest depends on this #define to determine whether it can
use various classes like std::tuple, or whether it has to fall
back to experimental classes in the std::tr1 namespace. The
check in the current version of gtest relies on the value of
the `__cplusplus` macro, but MSVC provides a non-conformant
value of this macro, making it effectively impossible to detect
C++11. In short, LLVM compiled with MSVC has been silently
using the tr1 versions of several classes since the beginning of
time.
This would normally be pretty benign, except that in the latest
preview of MSVC they have marked all of the tr1 classes
deprecated, so it spews thousands of warnings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316798 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It appears polly makes use of the `CMAKE_RUNTIME_OUTPUT_DIRECTORY` variable
when configuring its lit test suite. Reverting this for now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314551 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Three `CMAKE_.*_OUTPUT_DIRECTORY` variables used to be set in CMake and
referenced in various other parts of the project. However, in r198205
chapuni added a note to "don't set them anymore", and any remaining
references to them were subsequently removed in r198316 and r199592.
Now that the variables are no longer used anywhere, remove them, along
with the comments advising against using them any longer.
Test Plan:
I ran `check-all` and confirmed the tests built and passed.
Reviewers: beanz, chapuni
Reviewed By: beanz
Subscribers: mgorny
Differential Revision: https://reviews.llvm.org/D38389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314550 91177308-0d34-0410-b5e6-96231b3b80d8
Config map is not exposed through the command line, so testing this
is somewhat tricky. But basically we need a test that if a custom
driver builds a config map and passes it to main, it gets respected.
A config map allows config files in the source tree to be mapped
to alternate config files in the build tree. This particular test
works by having two config files in separate directories, and
setting up a config map to have that redirects A/lit.site.cfg
to B/altconfig. Then, we print a message in A/lit.site.cfg
and B/altconfig and check that we do see the output from B
but don't see the output from A. Additionally we test that
the test suite specified by A's config map is properly discovered.
Differential Revision: https://reviews.llvm.org/D38105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313887 91177308-0d34-0410-b5e6-96231b3b80d8
Many editors and Python-related diagnostics tools such as
debuggers break or fail in mysterious ways when python files
don't end in .py. This is especially true on Windows, but
still exists on other platforms. I don't want to be too heavy
handed in changing everything across the board, but I do want
to at least *allow* lit configs to have .py extensions. This
patch makes the discovery process first look for a config file
with a .py extension, and if one is not found, then looks for
a config file using the old method. So for existing users, there
should be no functional change.
Differential Revision: https://reviews.llvm.org/D37838
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313849 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an LLVM_ENABLE_IR_PGO option to enable building llvm and its
tools with IR PGO instrumentation.
Usage: -DLLVM_BUILD_INSTRUMENTED=On -DLLVM_ENABLE_IR_PGO=On (both
options must be enabled)
Differential Revision: https://reviews.llvm.org/D38066
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313770 91177308-0d34-0410-b5e6-96231b3b80d8
Despite a strong CMake warning that this is an unsupported
libcxx build configuration, some bots still rely on being
able to check out lit and libcxx independently with no
LLVM sources, and then run lit against libcxx.
A previous patch broke that workflow, so this is making it work
again. Unfortunately, it breaks generation of the llvm-lit
script for libcxx, but we will just have to live with that until
a solution is found that allows libcxx to make more use of
llvm build pieces. libcxx can still run tests by using the
ninja check target, or by running lit.py directly against the
build tree or source tree.
Differential Revision: https://reviews.llvm.org/D38057
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313763 91177308-0d34-0410-b5e6-96231b3b80d8
After speaking with the libcxx owners, they agreed that this is
a bug in the bot that needs to be fixed by the bot owners, and
the CMake changes are correct.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313643 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 4ad71811d45268d81b60f27e3b8b2bcbc23bd7b9.
There is a bot that is checking out libcxx and lit with nothing
else and then running lit.py against the test tree. Since there's
no LLVM source tree, there's no LLVM CMake. CMake actually
reports this as a warning saying unsupported libcxx configuration,
but I guess someone is depending on it anyway.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313607 91177308-0d34-0410-b5e6-96231b3b80d8
