This will allow a future F_Delete flag to be specified when we want
the file to be automatically deleted on close.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319117 91177308-0d34-0410-b5e6-96231b3b80d8
This one requires a new small feature in TempFile: the ability to keep
the temporary file with the temporary name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318458 91177308-0d34-0410-b5e6-96231b3b80d8
This just adds a TempFile class and replaces the use in
FileOutputBuffer with it.
The only difference for now is better error handling. Followup work includes:
- Convert other user of temporary files to it.
- Add support for automatically deleting on windows.
- Add a createUnnamed method that returns a potentially unnamed
file. It would be actually unnamed on modern linux and have a
unknown name on windows.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318069 91177308-0d34-0410-b5e6-96231b3b80d8
This allows clients to avoid an unnecessary fs::status() call on each
directory entry. Because the information returned by FindFirstFileEx
is a subset of the information returned by a regular status() call,
I needed to extract a base class from file_status that contains only
that information.
On my machine, this reduces the time required to enumerate a ThinLTO
cache directory containing 520k files from almost 4 minutes to less
than 2 seconds.
Differential Revision: https://reviews.llvm.org/D38716
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315378 91177308-0d34-0410-b5e6-96231b3b80d8
The current implementation of rename uses ReplaceFile if the
destination file already exists. According to the documentation for
ReplaceFile, the source file is opened without a sharing mode. This
means that there is a short interval of time between when ReplaceFile
renames the file and when it closes the file during which the
destination file cannot be opened.
This behaviour is not POSIX compliant because rename is supposed
to be atomic. It was also causing intermittent link failures when
linking with a ThinLTO cache; the ThinLTO cache implementation expects
all cache files to be openable.
This patch addresses that problem by re-implementing rename
using CreateFile and SetFileInformationByHandle. It is roughly a
reimplementation of ReplaceFile with a better sharing policy as well
as support for renaming in the case where the destination file does
not exist.
This implementation is still not fully POSIX. Specifically in the case
where the destination file is open at the point when rename is called,
there will be a short interval of time during which the destination
file will not exist. It isn't clear whether it is possible to avoid
this using the Windows API.
Differential Revision: https://reviews.llvm.org/D38570
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315079 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Found when testing stage-2 build with D38101.
```
In file included from /build/llvm/lib/Support/Path.cpp:1045:
/build/llvm/lib/Support/Unix/Path.inc:648:14: error: comparison 'uint64_t' (aka 'unsigned long') > 18446744073709551615 is always false [-Werror,-Wtautological-constant-compare]
if (length > std::numeric_limits<size_t>::max()) {
~~~~~~ ^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
`size_t` is `uint64_t` here, apparently, thus any `uint64_t` value
always fits into `size_t`.
Initial patch was to use some preprocessor logic to
not check if the size is known to fit at compile time.
But Zachary Turner suggested using this approach.
Reviewers: Bigcheese, rafael, zturner, mehdi_amini
Reviewed by (via email): zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D38132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314312 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It was added to support clang warnings about includes with case
mismatches, but it ended up not being necessary.
Reviewers: twoh, rafael
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D36328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310078 91177308-0d34-0410-b5e6-96231b3b80d8
This creates a new library called BinaryFormat that has all of
the headers from llvm/Support containing structure and layout
definitions for various types of binary formats like dwarf, coff,
elf, etc as well as the code for identifying a file from its
magic.
Differential Revision: https://reviews.llvm.org/D33843
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304864 91177308-0d34-0410-b5e6-96231b3b80d8
This was exposed in r297945 and r301220: the intermediate complement
is a 32-bit value, and casting it to 'perms' invokes UB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301373 91177308-0d34-0410-b5e6-96231b3b80d8
In doing so, clean up the MD5 interface a little. Most
existing users only care about the lower 8 bytes of an MD5,
but for some users that care about the upper and lower,
there wasn't a good interface. Furthermore, consumers
of the MD5 checksum were required to handle endianness
details on their own, so it seems reasonable to abstract
this into a nicer interface that just gives you the right
value.
Differential Revision: https://reviews.llvm.org/D31105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298322 91177308-0d34-0410-b5e6-96231b3b80d8
This change adds support for functions to set and get file permissions, in a similar manner to the C++17 permissions() function in <filesystem>. The setter uses chmod on Unix systems and SetFileAttributes on Windows, setting the permissions as passed in. The getter simply uses the existing status() function.
Prior to this change, status() would always return an unknown value for the permissions on a Windows file, making it impossible to test the new function on Windows. I have therefore added support for this as well. On Linux, prior to this change, the permissions included the file type, which should actually be accessed via a different member of the file_status class.
Note that on Windows, only the *_write permission bits have any affect - if any are set, the file is writable, and if not, the file is read-only. This is in common with what MSDN describes for their behaviour of std::filesystem::permissions(), and also what boost::filesystem does.
The motivation behind this change is so that we can easily test behaviour on read-only files in LLVM unit tests, but I am sure that others may find it useful in some situations.
Reviewers: zturner, amccarth, aaron.ballman
Differential Revision: https://reviews.llvm.org/D30736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297945 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM already has real_path like functionality, but it is
cumbersome to use and involves clean up after (e.g. you have
to call openFileForRead, then close the resulting FD).
Furthermore, on Windows it doesn't work for directories since
opening a directory and opening a file require slightly
different flags.
So I add a simple function `real_path` which works for all
paths on all platforms and has a simple to use interface.
In doing so, I add the ability to opt in to resolving tilde
expressions (e.g. ~/foo), which are normally handled by
the shell.
Differential Revision: https://reviews.llvm.org/D30668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297483 91177308-0d34-0410-b5e6-96231b3b80d8
We already have a function create_directories() which can create
an entire tree, and remove() which can remove an empty directory,
but we do not have remove_directories() which can remove an entire
tree. This patch adds such a function.
Because removing a directory tree can have dangerous consequences
when the tree contains a directory symlink, the patch here updates
the existing directory_iterator construct to optionally not follow
symlinks (previously it would always follow symlinks). The delete
algorithm uses this flag so that for symlinks, only the links are
removed, and not the targets.
On Windows this is implemented with SHFileOperation, which also
does not recurse into symbolic links or junctions.
Differential Revision: https://reviews.llvm.org/D30676
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297314 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a cross-platform way of setting the current working directory
analogous to the existing current_path() function used for retrieving
it. The function will be used in lldb.
Reviewers: rafael, silvas, zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292907 91177308-0d34-0410-b5e6-96231b3b80d8
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
This recommits 291006, reverted in r291007.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291016 91177308-0d34-0410-b5e6-96231b3b80d8
Breaks Clang's use of bitcode. Reverting until I have a fix to go with
it there.
This reverts commit r291006.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291007 91177308-0d34-0410-b5e6-96231b3b80d8
If this is a problem for anyone (shared_ptr is two pointers in size,
whereas IntrusiveRefCntPtr is 1 - and the ref count control block that
make_shared adds is probably larger than the one int in RefCountedBase)
I'd prefer to address this by adding a lower-overhead version of
shared_ptr (possibly refactoring IntrusiveRefCntPtr into such a thing)
to avoid the intrusiveness - this allows memory ownership to remain
orthogonal to types and at least to me, seems to make code easier to
understand (since no implicit ownership acquisition can happen).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291006 91177308-0d34-0410-b5e6-96231b3b80d8
The intrusive nature of the reference counting is not required/used
here, so simplify the ownership model to make the code easier to
understand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291005 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The motivation is to support better the -object_path_lto option on
Darwin. The linker needs to write down the generate object files on
disk for later use by lldb or dsymutil (debug info are not present
in the final binary). We're moving this into libLTO so that we can
be smarter when a cache is enabled and hard-link when possible
instead of duplicating the files.
Reviewers: tejohnson, deadalnix, pcc
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D27507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289631 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes it possible to identify object files created by CL.exe
with /GL option. Such file contains Microsoft proprietary intermediate
code instead of target machine code to do LTO.
I need this to print out user-friendly error message from LLD.
Differential Revision: https://reviews.llvm.org/D26645
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286919 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is a follow-up to D25416. It removes all usages of TimeValue from
llvm/Support library (except for the actual TimeValue declaration), and replaces
them with appropriate usages of std::chrono. To facilitate this, I have added
small utility functions for converting time points and durations into appropriate
OS-specific types (FILETIME, struct timespec, ...).
Reviewers: zturner, mehdi_amini
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25730
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284966 91177308-0d34-0410-b5e6-96231b3b80d8
