I noticed this pattern in D38316 / D38388. We failed to combine a shuffle that is either
repeating a scalar insertion at the same position in a vector or translated to a different
element index.
Like the earlier patch, this could be an instcombine too, but since we opted to make this
a DAG transform earlier, I've made this one a DAG patch too.
We do not need any legality checking because the new insert is identical to the existing
insert except that it may have a different constant insertion operand.
The constant insertion test in test/CodeGen/X86/vector-shuffle-combining.ll was the
motivation for D38756.
Differential Revision: https://reviews.llvm.org/D40209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320050 91177308-0d34-0410-b5e6-96231b3b80d8
We can just extend the original vector to vXi1 and trust that the legalization process will revisit it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320013 91177308-0d34-0410-b5e6-96231b3b80d8
If the mask needs to be promoted that should occur by the legalizer detecting the mask operand needs to be promoted not as a side effect of another action.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319852 91177308-0d34-0410-b5e6-96231b3b80d8
If the mask needs to be promoted it should be handled by operand promotion after the result is legalized.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319851 91177308-0d34-0410-b5e6-96231b3b80d8
The mask will be promoted if necessary when operands are promoted. It's possible the mask type is legal, but the setcc result type is a different. We shouldn't promote to the setcc result type unless the mask needs to be promoted.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319850 91177308-0d34-0410-b5e6-96231b3b80d8
GetWidenedVector does't guarantee the widened elements are zero which would break the intended behavior of the operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319849 91177308-0d34-0410-b5e6-96231b3b80d8
The patch originally broke Chromium (crbug.com/791714) due to its failing to
specify that the new pseudo instructions clobber EFLAGS. This commit fixes
that.
> Summary: This strengthens the guard and matches MSVC.
>
> Reviewers: hans, etienneb
>
> Subscribers: hiraditya, JDevlieghere, vlad.tsyrklevich, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D40622
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319824 91177308-0d34-0410-b5e6-96231b3b80d8
There's no such thing as a setcc with vector operands and scalar result. And if we're trying to widen the result we would have to already be looking at a vector result type.
So this patch renames the VSETCC function as the SETCC function and delete the original SETCC function.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319799 91177308-0d34-0410-b5e6-96231b3b80d8
Search from AND nodes to find whether they can be propagated back to
loads, so that the AND and load can be combined into a narrow load.
We search through OR, XOR and other AND nodes and all bar one of the
leaves are required to be loads or constants. The exception node then
needs to be masked off meaning that the 'and' isn't removed, but the
loads(s) are narrowed still.
Differential Revision: https://reviews.llvm.org/D39604
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319773 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319771 91177308-0d34-0410-b5e6-96231b3b80d8
The CONCAT_VECTORS operand get its type from getSetCCResultType, but if the mask type and the setcc have different scalar sizes this creates an illegal CONCAT_VECTORS operation. The concat type should be 2x the mask type, and then an extend should be added if needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319744 91177308-0d34-0410-b5e6-96231b3b80d8
MatchRotate assumes the types of the types of LHS and RHS are equal,
which is always the case then they come from an OR node, but here
we're getting them from two different TRUNC nodes, so we have to check
the types.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319695 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319665 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a non-splat constant shift amount, the minimum shift amount can be used to infer the number of zero upper bits of the result. There's probably a lot more that we can do here, but this
fixes a case where I wanted to infer the sign bit as zero when all the shift amounts are non-zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319639 91177308-0d34-0410-b5e6-96231b3b80d8
The version that takes APInt is out of line. The 'unsigned' version optimizes for the common case of single word APInts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319628 91177308-0d34-0410-b5e6-96231b3b80d8
Two issues found when doing codegen for splitting vector with non-zero alloca addr space:
DAGTypeLegalizer::SplitVecRes_INSERT_VECTOR_ELT/SplitVecOp_EXTRACT_VECTOR_ELT uses dummy pointer info for creating
SDStore. Since one pointer operand contains multiply and add, InferPointerInfo is unable to
infer the correct pointer info, which ends up with a dummy pointer info for the target to lower
store and results in isel failure. The fix is to introduce MachinePointerInfo::getUnknownStack to
represent MachinePointerInfo which is known in alloca address space but without other information.
TargetLowering::getVectorElementPointer uses value type of pointer in addr space 0 for
multiplication of index and then add it to the pointer. However the pointer may be in an addr
space which has different size than addr space 0. The fix is to use the pointer value type for
index multiplication.
Differential Revision: https://reviews.llvm.org/D39758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319622 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
1/ Operand folding during complex pattern matching for LEAs has been extended, such that it promotes Scale to
accommodate similar operand appearing in the DAG e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will now look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs so that if there is an opportunity
then complex LEAs (having 3 operands) could be factored out e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops, thus avoiding creation of any complex LEAs within a loop.
4/ Simplify LEA converts (lea (BASE,1,INDEX,0) --> add (BASE, INDEX) which offers better through put.
PR32755 will be taken care of by this pathc.
Previous patch revisions : r313343 , r314886
Reviewers: lsaba, RKSimon, craig.topper, qcolombet, jmolloy, jbhateja
Reviewed By: lsaba, RKSimon, jbhateja
Subscribers: jmolloy, spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319543 91177308-0d34-0410-b5e6-96231b3b80d8
Type promotion makes no guarantee about the contents of the promoted bits. Since the gather/scatter instruction will use the bits to calculate addresses, we need to ensure they aren't garbage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319520 91177308-0d34-0410-b5e6-96231b3b80d8
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319505 91177308-0d34-0410-b5e6-96231b3b80d8
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319445 91177308-0d34-0410-b5e6-96231b3b80d8
visitAND attempts to narrow the width of extending loads that are
then masked off. ReduceLoadWidth already exists for a similar purpose
and handles shifts, so I've moved the code to handle AND nodes there.
Differential Revision: https://reviews.llvm.org/D39595
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319421 91177308-0d34-0410-b5e6-96231b3b80d8
If we put in an assertsext/zext here, we're able to generate better truncate code using pack on pre-avx512 targets.
Similar is already done during type legalization. This is the equivalent for op legalization
Differential Revision: https://reviews.llvm.org/D40591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319368 91177308-0d34-0410-b5e6-96231b3b80d8
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319272 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we had an isel pattern to add the truncate. Instead use Promote to add the truncate to the DAG before isel.
The Promote legalization code had to be updated to prevent an infinite loop if promotion took multiple steps because it wasn't remembering the previously tried value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319259 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Recommitting this with the correct sorting predicate. The Low field of Clusters is a ConstantInt and
cannot be directly compared. So we needed to invoke slt (signed less than) to compare correctly.
This fixes failures in the following tests uncovered by D39245:
LLVM :: CodeGen/ARM/ifcvt3.ll
LLVM :: CodeGen/ARM/switch-minsize.ll
LLVM :: CodeGen/X86/switch.ll
LLVM :: CodeGen/X86/switch-bt.ll
LLVM :: CodeGen/X86/switch-density.ll
Reviewers: hans, fhahn
Reviewed By: hans
Subscribers: aemerson, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40541
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319210 91177308-0d34-0410-b5e6-96231b3b80d8
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319173 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319168 91177308-0d34-0410-b5e6-96231b3b80d8
Unoptimized IR can have linear sequences of stores to an array, where the
initial GEP for the first store is formed from the pointer to the array, and the
GEP for each store after the first is formed from the previous GEP with some
offset in an inductive fashion.
The (large) resulting DAG when analyzed by DAGCombine undergoes an excessive
number of combines as each store node is examined every time its' offset node
is combined with any child of the offset. One of the transformations is
findBetterNeighborChains which assists MergeConsecutiveStores. The former
relies on repeated chain walking to do its' work, however MergeConsecutiveStores
is disabled at O0 which makes the transformation redundant.
Any optimization level other than O0 would invoke InstCombine which would
resolve the chain of GEPs into flat base + offset GEP for each store which
does not exhibit the repeated examination of each store to the array.
Disabling this optimization fixes an excessive compile time issue (30~ minutes
for the test case provided) at O0.
Reviewers: niravd, craig.topper, t.p.northover
Differential Revision: https://reviews.llvm.org/D40193
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319142 91177308-0d34-0410-b5e6-96231b3b80d8
With AVX512 vXi1 types are legal so we shouldn't be extending them.
This change is similar to existing code in the zext(setcc) combine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319120 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently ScalarizeVecRes_SETCC checks for the result type being a vector and jumps to ScalarizeVecRes_VSETCC. But if we're scalarizing a vector result, aren't we guaranteed to be looking at a vector type?
This patch deletes the current ScalarizeVecRes_SETCC and renames ScalarizeVecRes_VSETCC to ScalarizeVecRes_SETCC.
Reviewers: RKSimon, arsenm, eladcohen, zvi
Reviewed By: RKSimon
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D40452
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318982 91177308-0d34-0410-b5e6-96231b3b80d8
