Without this when lld failed to replace the output file it would leave
the temporary behind. The problem is that the existing logic is
- cancel the delete flag
- rename
We have to cancel first to avoid renaming and then crashing and
deleting the old version. What is missing then is deleting the
temporary file if the rename fails.
This can be an issue on both unix and windows, but I am not sure how
to cause the rename to fail reliably on unix. I think it can be done
on ZFS since it has an ACL system similar to what windows uses, but
adding support for checking that in llvm-lit is probably not worth it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319786 91177308-0d34-0410-b5e6-96231b3b80d8
This recommits r319533 which was broken llvm-config --system-libs
output. The reason was that I used find_libraries for searching for the
z library. This returns absolute paths, and when these paths made it
into llvm-config, it made it produce nonsensical flags. To fix this, I
hand-roll a search for the library in the same way that we search for
the terminfo library a couple of lines below.
This is a bit less flexible than the find_library option, as it does not
allow the user to specify the path to the library at configure time
(which is important on windows, as zlib is unlikely to be found in any
of the standard places cmake searches), but I was able to guide the
build to find it with appropriate values of LIB and INCLUDE environment
variables.
Reviewers: compnerd, rnk, beanz, rafael
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40779
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319751 91177308-0d34-0410-b5e6-96231b3b80d8
This is for PR35460.
Currently when LLD adds files to TarWriter it may pass the same file
multiple times. For example it happens for clang reproduce file which specifies
archive (.a) files more than once in command line.
Patch makes TarWriter to ignore files with the same path, so it will
add only the first one to archive.
Differential revision: https://reviews.llvm.org/D40606
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319750 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r319533 as it broke llvm-config --system-libs output
and everything that depends on it (which is mostly out of tree or
downstream folks, but includes a couple of llvm buildbots as well).
I think I have a fix for this in D40779, but I want someone to look
review it first. In the mean time, I am reverting this change, as it
seems to break a lot of people.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319663 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
zlib support was hard-wired to off for (non-cygwin) windows targets.
This disables some features, such as reading debug info from compressed
dwarf sections.
This has been this way since zlib support was added in 2013 (r180083),
but there is no obvious reason for that. Zlib is perfectly capable of
being compiled for windows (it even has a cmake file that works out of
the box).
This enables one to turn on zlib support on windows, if one has zlib
avaliable.
Reviewers: rnk, beanz
Subscribers: mgorny, aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D40655
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319533 91177308-0d34-0410-b5e6-96231b3b80d8
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319505 91177308-0d34-0410-b5e6-96231b3b80d8
Certain ARM implementations treat icache clear instruction as a memory read,
and CPU segfaults on trying to clear cache on !PROT_READ page.
We workaround this in Memory::protectMappedMemory by adding
PROT_READ to affected pages, clearing the cache, and then setting
desired protection.
This fixes "AllocationTests/MappedMemoryTest.***/3" unit-tests on
affected hardware.
Reviewers: psmith, zatrazz, kristof.beyls, lhames
Reviewed By: lhames
Subscribers: llvm-commits, krytarowski, peter.smith, jgreenhalgh, aemerson,
rengolin
Patch by maxim-kuvrykov!
Differential Revision: https://reviews.llvm.org/D40423
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319166 91177308-0d34-0410-b5e6-96231b3b80d8
This will allow a future F_Delete flag to be specified when we want
the file to be automatically deleted on close.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319117 91177308-0d34-0410-b5e6-96231b3b80d8
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319070 91177308-0d34-0410-b5e6-96231b3b80d8
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318996 91177308-0d34-0410-b5e6-96231b3b80d8
The previous commit had the condition in the do/while backwards.
Debug builds currently print out low level details of the Knuth division algorithm when -debug is used. This information isn't useful in most cases and just adds noise to the log.
This adds a new preprocessor flag to enable the prints in the knuth division code in APInt.
Differential Revision: https://reviews.llvm.org/D40404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318966 91177308-0d34-0410-b5e6-96231b3b80d8
Debug builds currently print out low level details of the Knuth division algorithm when -debug is used. This information isn't useful in most cases and just adds noise to the log.
This adds a new preprocessor flag to enable the prints in the knuth division code in APInt.
Differential Revision: https://reviews.llvm.org/D40404
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318963 91177308-0d34-0410-b5e6-96231b3b80d8
We already allowed keep+discard. It is important to be able to discard
a temporary if a rename fail. It is also convenient as it allows the
use of RAII for discarding.
Allow discarding twice for similar reasons.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318867 91177308-0d34-0410-b5e6-96231b3b80d8
The default limit is 1000000 but it can be configured with a cache
policy. The motivation is that some filesystems (notably ext4) have
a limit on the number of files that can be contained in a directory
(separate from the inode limit).
Differential Revision: https://reviews.llvm.org/D40327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318857 91177308-0d34-0410-b5e6-96231b3b80d8
The CodeGenCoverage.h header is installed, but it references
the build-only header "llvm/Config/config.h". This breaks use
of the CodeGenCoverage.h header once it is installed, because config.h isn't
available.
This patch fixes the error by moving the config.h include from
the CodeGenCoverage.h header (where it's not needed), to the
CodeGenCoverage.cpp source file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318602 91177308-0d34-0410-b5e6-96231b3b80d8
This move some of the complexity over to the lower level TempFile.
It also makes it a bit more explicit where errors are ignored since we
now have a call to consumeError.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318550 91177308-0d34-0410-b5e6-96231b3b80d8
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318489 91177308-0d34-0410-b5e6-96231b3b80d8
Removes AllocateRWX, setWritable and setExecutable from sys::Memory and
standardizes on allocateMappedMemory / protectMappedMemory. The
allocateMappedMemory method is updated to request full permissions for memory
blocks so that they can be marked executable later.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318464 91177308-0d34-0410-b5e6-96231b3b80d8
This was broken when building a 32-bit native toolchain, as
shifting a size_t right by 32 is UB when sizeof(size_t) == 8.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318462 91177308-0d34-0410-b5e6-96231b3b80d8
This one requires a new small feature in TempFile: the ability to keep
the temporary file with the temporary name.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318458 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change fixes a bug where `obj2yaml` can in some cases produce YAML that
causes `yaml2obj` to error.
The ELF YAML document structure has a `Sections` mapping, which contains three
mappings, all of which are optional: `Local`, `Global`, and `Weak.` Any one of
these can be missing, but if all three are missing, then `yaml2obj` errors. This
change allows YAML input for cases like this one.
I have tested this with check-llvm and check-lld, and all tests passed.
This change is the result of test failures while working on D39582, which
introduces a `DynamicSymbols` mapping, which will be empty at times.
Reviewers: compnerd, jakehehrlich, silvas, kledzik, mehdi_amini, pcc
Reviewed By: compnerd
Subscribers: silvas, llvm-commits
Differential Revision: https://reviews.llvm.org/D39908
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318428 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318356 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Make it possible to feed runtime information back to tablegen to enable
profile-guided tablegen-eration, detection of untested tablegen definitions, etc.
Being a cross-compiler by nature, LLVM will potentially collect data for multiple
architectures (e.g. when running 'ninja check'). We therefore need a way for
TableGen to figure out what data applies to the backend it is generating at the
time. This patch achieves that by including the name of the 'def X : Target ...'
for the backend in the TargetRegistry.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, arsenm, jyknight, aditya_nandakumar, sdardis, nemanjai, ab, nhaehnle, t.p.northover, javed.absar, qcolombet, llvm-commits, fedor.sergeev
Differential Revision: https://reviews.llvm.org/D39742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318352 91177308-0d34-0410-b5e6-96231b3b80d8
This requires a small change to TempFile: allowing a discard after a
failed keep.
With this the cache now handles signals and reuses a fd instead of
reopening the file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318322 91177308-0d34-0410-b5e6-96231b3b80d8
