All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
If a struct would end up half in GPRs and half on SP the ABI says it should
actually go entirely on the stack. We were getting this wrong in GlobalISel
before, causing compatibility issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311388 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit e8fd209647 in an
attempt to appease the GlobalISel buildbot, which fails in the
test-suite with errors like
fpcmp: files differ without tolerance allowance
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311151 91177308-0d34-0410-b5e6-96231b3b80d8
If a struct would end up half in GPRs and half on SP the ABI says it should
actually go entirely on the stack. We were getting this wrong in GlobalISel
before, causing compatibility issues.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311137 91177308-0d34-0410-b5e6-96231b3b80d8
With this change, the GlobalISel library gets always built. In
particular, this is not possible to opt GlobalISel out of the build
using the LLVM_BUILD_GLOBAL_ISEL variable any more.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309990 91177308-0d34-0410-b5e6-96231b3b80d8
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302527 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Do three things to help with that:
- Add AttributeList::FirstArgIndex, which is an enumerator currently set
to 1. It allows us to change the indexing scheme with fewer changes.
- Add addParamAttr/removeParamAttr. This just shortens addAttribute call
sites that would otherwise need to spell out FirstArgIndex.
- Remove some attribute-specific getters and setters from Function that
take attribute list indices. Most of these were only used from
BuildLibCalls, and doesNotAlias was only used to test or set if the
return value is malloc-like.
I'm happy to split the patch, but I think they are probably easier to
review when taken together.
This patch should be NFC, but it sets the stage to change the indexing
scheme to this, which is more convenient when indexing into an array:
0: func attrs
1: retattrs
2...: arg attrs
Reviewers: chandlerc, pete, javed.absar
Subscribers: david2050, llvm-commits
Differential Revision: https://reviews.llvm.org/D32811
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302060 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This class is a list of AttributeSetNodes corresponding the function
prototype of a call or function declaration. This class used to be
called ParamAttrListPtr, then AttrListPtr, then AttributeSet. It is
typically accessed by parameter and return value index, so
"AttributeList" seems like a more intuitive name.
Rename AttributeSetImpl to AttributeListImpl to follow suit.
It's useful to rename this class so that we can rename AttributeSetNode
to AttributeSet later. AttributeSet is the set of attributes that apply
to a single function, argument, or return value.
Reviewers: sanjoy, javed.absar, chandlerc, pete
Reviewed By: pete
Subscribers: pete, jholewinski, arsenm, dschuff, mehdi_amini, jfb, nhaehnle, sbc100, void, llvm-commits
Differential Revision: https://reviews.llvm.org/D31102
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298393 91177308-0d34-0410-b5e6-96231b3b80d8
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298254 91177308-0d34-0410-b5e6-96231b3b80d8
Users often call getArgumentList().size(), which is a linear way to get
the number of function arguments. arg_size(), on the other hand, is
constant time.
In general, the fact that arguments are stored in an iplist is an
implementation detail, so I've removed it from the Function interface
and moved all other users to the argument container APIs (arg_begin(),
arg_end(), args(), arg_size()).
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D31052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298010 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297241 91177308-0d34-0410-b5e6-96231b3b80d8
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297188 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297177 91177308-0d34-0410-b5e6-96231b3b80d8
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297100 91177308-0d34-0410-b5e6-96231b3b80d8
The CallingConv.td rules allocate 8 bytes for these kinds of arguments
on AAPCS targets, but we were only recording the smaller amount. The
difference is theoretical on AArch64 because we don't actually store
more than the smaller amount, but it's still much better to have these
two components in agreement.
Based on Diana Picus's ARM equivalent patch (where it matters a lot
more).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296754 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296474 91177308-0d34-0410-b5e6-96231b3b80d8
The AAPCS ABI is substantially more complicated so that's coming in a separate
patch. For now we can generate correct code for iOS though.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294493 91177308-0d34-0410-b5e6-96231b3b80d8
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292283 91177308-0d34-0410-b5e6-96231b3b80d8
With some minor manual fixes for using function_ref instead of
std::function. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291904 91177308-0d34-0410-b5e6-96231b3b80d8
The InstructionSelect pass will not look at target specific instructions
since they are already selected. As a result, the operands of target
specific instructions must be properly constrained, because it is not
going to fix them.
This fixes invalid register classes on call instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290377 91177308-0d34-0410-b5e6-96231b3b80d8
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288980 91177308-0d34-0410-b5e6-96231b3b80d8
This function seems target-independent so far: all the target-specific behaviour
is isolated in the CCAssignFn and the ValueHandler (which we're also extracting
into the generic CallLowering).
The intention is to use this in the ARM backend.
Differential Revision: https://reviews.llvm.org/D27045
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288658 91177308-0d34-0410-b5e6-96231b3b80d8
We still don't really have an equivalent of "AssertXExt" in DAG, so we don't
exploit the guarantees on the receiving side yet, but this should produce
conservatively correct code on iOS ABIs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282069 91177308-0d34-0410-b5e6-96231b3b80d8
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282068 91177308-0d34-0410-b5e6-96231b3b80d8
This should match the existing behaviour for passing complicated struct and
array types, in particular HFAs come through like that from Clang.
For C & C++ we still need to somehow support all the weird ABI flags, or at
least those that are present in the IR (signext, byval, ...), and stack-based
parameter passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281977 91177308-0d34-0410-b5e6-96231b3b80d8
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281035 91177308-0d34-0410-b5e6-96231b3b80d8
More preparation for dropping source types from MachineInstrs: regsters coming
out of already-selected code (i.e. non-generic instructions) don't have a type,
but that information is needed so we must add it manually.
This is done via a new G_TYPE instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280292 91177308-0d34-0410-b5e6-96231b3b80d8
There should be no functional change here, I'm just making the implementation
of "frem" (to libcall) legalization easier for a followup.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279987 91177308-0d34-0410-b5e6-96231b3b80d8
When doing the ABI lowering, report a failure to the caller instead of
asserting. This gives a chance for the caller to recover.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279890 91177308-0d34-0410-b5e6-96231b3b80d8
For MachineInstrBuilder, having to manually use RegState::Define is ugly and
makes register definitions clunkier than they need to be, so this adds two
convenience functions: addDef and addUse.
For MachineIRBuilder, we want to avoid BuildMI's first-reg-is-def rule because
it's hidden away and causes bugs. So this patch switches buildInstr to
returning a MachineInstrBuilder and adding *all* operands via addDef/addUse.
NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277176 91177308-0d34-0410-b5e6-96231b3b80d8
They're basically i64 for AArch64, but we'll leave them intact for stranger
targets. Also add some tests for the (very few) other cases we can handle right
now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276689 91177308-0d34-0410-b5e6-96231b3b80d8
Original message:
Get rid of the ifdefs in TargetLowering.
Introduce a new API used only by GlobalISel: CallLowering.
This API will contain target hooks dedicated to call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260998 91177308-0d34-0410-b5e6-96231b3b80d8
Introduce a new API used only by GlobalISel: CallLowering.
This API will contain target hooks dedicated to call lowering.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@260922 91177308-0d34-0410-b5e6-96231b3b80d8
