Pass parameters properly in calls to such functions (pass all
floats in integer registers), and handle va_start properly (allocate
stack immediately below the arguments on the stack, to save the
register arguments into a single continuous array).
Differential Revision: https://reviews.llvm.org/D35006
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307928 91177308-0d34-0410-b5e6-96231b3b80d8
The "Add/sub (shifted reg)" instructions use the 31 encoding for xzr and wzr
rather than the SP, so we need to use different variants.
Situations where this actually comes up are rare enough (see test-case) that I
think falling back to DAG is fine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305230 91177308-0d34-0410-b5e6-96231b3b80d8
Using arguments with attribute inalloca creates problems for verification
of machine representation. This attribute instructs the backend that the
argument is prepared in stack prior to CALLSEQ_START..CALLSEQ_END
sequence (see http://llvm.org/docs/InAlloca.htm for details). Frame size
stored in CALLSEQ_START in this case does not count the size of this
argument. However CALLSEQ_END still keeps total frame size, as caller can
be responsible for cleanup of entire frame. So CALLSEQ_START and
CALLSEQ_END keep different frame size and the difference is treated by
MachineVerifier as stack error. Currently there is no way to distinguish
this case from actual errors.
This patch adds additional argument to CALLSEQ_START and its
target-specific counterparts to keep size of stack that is set up prior to
the call frame sequence. This argument allows MachineVerifier to calculate
actual frame size associated with frame setup instruction and correctly
process the case of inalloca arguments.
The changes made by the patch are:
- Frame setup instructions get the second mandatory argument. It
affects all targets that use frame pseudo instructions and touched many
files although the changes are uniform.
- Access to frame properties are implemented using special instructions
rather than calls getOperand(N).getImm(). For X86 and ARM such
replacement was made previously.
- Changes that reflect appearance of additional argument of frame setup
instruction. These involve proper instruction initialization and
methods that access instruction arguments.
- MachineVerifier retrieves frame size using method, which reports sum of
frame parts initialized inside frame instruction pair and outside it.
The patch implements approach proposed by Quentin Colombet in
https://bugs.llvm.org/show_bug.cgi?id=27481#c1.
It fixes 9 tests failed with machine verifier enabled and listed
in PR27481.
Differential Revision: https://reviews.llvm.org/D32394
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302527 91177308-0d34-0410-b5e6-96231b3b80d8
This eliminates many extra 'Idx' induction variables in loops over
arguments in CodeGen/ and Target/. It also reduces the number of places
where we assume that ReturnIndex is 0 and that we should add one to
argument numbers to get the corresponding attribute list index.
NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301666 91177308-0d34-0410-b5e6-96231b3b80d8
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288458 91177308-0d34-0410-b5e6-96231b3b80d8
We were relying on the misleadingly-names $status result to actually be the
status. Actually it's just a scratch register that may or may not be valid (and
is the inverse of the real ststus anyway). Success can be determined by
comparing the value loaded against the one we wanted to see for "cmpxchg
strong" loops like this.
Should fix PR28819.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277513 91177308-0d34-0410-b5e6-96231b3b80d8
At -O0, cmpxchg survives AtomicExpand: it's mostly straightforward
to select it in fast-isel, and let the pseudo be expanded later.
extractvalues on the result are the tricky part: the generic logic
only works for legal types (and it would be painful to make it
support illegal types), so we can only support i32/i64 cmpxchg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276183 91177308-0d34-0410-b5e6-96231b3b80d8
A constant pool holding the address of a variable in equivalent to
a got entry. It produces exactly the same instruction sequence as a
got use and unlike a got use this is not uniqued by the linker.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271311 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
GEPOperator: provide getResultElementType alongside getSourceElementType.
This is made possible by adding a result element type field to GetElementPtrConstantExpr, which GetElementPtrInst already has.
GEP: replace get(Pointer)ElementType uses with get{Source,Result}ElementType.
Reviewers: mjacob, dblaikie
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16275
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258145 91177308-0d34-0410-b5e6-96231b3b80d8
The access function has a short entry and a short exit, the initialization
block is only run the first time. To improve the performance, we want to
have a short frame at the entry and exit.
We explicitly handle most of the CSRs via copies. Only the CSRs that are not
handled via copies will be in CSR_SaveList.
Frame lowering and prologue/epilogue insertion will generate a short frame
in the entry and exit according to CSR_SaveList. The majority of the CSRs will
be handled by register allcoator. Register allocator will try to spill and
reload them in the initialization block.
We add CSRsViaCopy, it will be explicitly handled during lowering.
1> we first set FunctionLoweringInfo->SplitCSR if conditions are met (the target
supports it for the given machine function and the function has only return
exits). We also call TLI->initializeSplitCSR to perform initialization.
2> we call TLI->insertCopiesSplitCSR to insert copies from CSRsViaCopy to
virtual registers at beginning of the entry block and copies from virtual
registers to CSRsViaCopy at beginning of the exit blocks.
3> we also need to make sure the explicit copies will not be eliminated.
The target independent portion was committed as r255353.
rdar://problem/23557469
Differential Revision: http://reviews.llvm.org/D15341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255821 91177308-0d34-0410-b5e6-96231b3b80d8
The patch in http://reviews.llvm.org/D13745 is broken into four parts:
1. New interfaces without functional changes.
2. Use new interfaces in SelectionDAG, while in other passes treat probabilities
as weights.
3. Use new interfaces in all other passes.
4. Remove old interfaces.
This the second patch above. In this patch SelectionDAG starts to use
probability-based interfaces in MBB to add successors but other MC passes are
still using weight-based interfaces. Therefore, we need to maintain correct
weight list in MBB even when probability-based interfaces are used. This is
done by updating weight list in probability-based interfaces by treating the
numerator of probabilities as weights. This change affects many test cases
that check successor weight values. I will update those test cases once this
patch looks good to you.
Differential revision: http://reviews.llvm.org/D14361
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253965 91177308-0d34-0410-b5e6-96231b3b80d8
Note, this was reviewed (and more details are in) http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
These intrinsics currently have an explicit alignment argument which is
required to be a constant integer. It represents the alignment of the
source and dest, and so must be the minimum of those.
This change allows source and dest to each have their own alignments
by using the alignment attribute on their arguments. The alignment
argument itself is removed.
There are a few places in the code for which the code needs to be
checked by an expert as to whether using only src/dest alignment is
safe. For those places, they currently take the minimum of src/dest
alignments which matches the current behaviour.
For example, code which used to read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 500, i32 8, i1 false)
will now read:
call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 8 %dest, i8* align 8 %src, i32 500, i1 false)
For out of tree owners, I was able to strip alignment from calls using sed by replacing:
(call.*llvm\.memset.*)i32\ [0-9]*\,\ i1 false\)
with:
$1i1 false)
and similarly for memmove and memcpy.
I then added back in alignment to test cases which needed it.
A similar commit will be made to clang which actually has many differences in alignment as now
IRBuilder can generate different source/dest alignments on calls.
In IRBuilder itself, a new argument was added. Instead of calling:
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, /* isVolatile */ false)
you now call
CreateMemCpy(Dst, Src, getInt64(Size), DstAlign, SrcAlign, /* isVolatile */ false)
There is a temporary class (IntegerAlignment) which takes the source alignment and rejects
implicit conversion from bool. This is to prevent isVolatile here from passing its default
parameter to the source alignment.
Note, changes in future can now be made to codegen. I didn't change anything here, but this
change should enable better memcpy code sequences.
Reviewed by Hal Finkel.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253511 91177308-0d34-0410-b5e6-96231b3b80d8
We used to try to constant-fold them to i32 immediates.
Given that fast-isel doesn't otherwise support vNi1, when selecting
the result users, we'd fallback to SDAG anyway.
However, if the users were in another block, we'd insert broken
cross-class copies (GPR32 to FPR64).
Give up, let SDAG agree with itself on a vNi1 legalization strategy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252364 91177308-0d34-0410-b5e6-96231b3b80d8
When optimization is disabled, edge weights that are stored in MBB won't be used so that we don't have to store them. Currently, this is done by adding successors with default weight 0, and if all successors have default weights, the weight list will be empty. But that the weight list is empty doesn't mean disabled optimization (as is stated several times in MachineBasicBlock.cpp): it may also mean all successors just have default weights.
We should discourage using default weights when adding successors, because it is very easy for users to forget update the correct edge weights instead of using default ones (one exception is that the MBB only has one successor). In order to detect such usages, it is better to differentiate using default weights from the case when optimizations is disabled.
In this patch, a new interface addSuccessorWithoutWeight(MBB*) is created for when optimization is disabled. In this case, MBB will try to maintain an empty weight list, but it cannot guarantee this as for many uses of addSuccessor() whether optimization is disabled or not is not checked. But it can guarantee that if optimization is enabled, then the weight list always has the same size of the successor list.
Differential revision: http://reviews.llvm.org/D13963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@251429 91177308-0d34-0410-b5e6-96231b3b80d8
This should be no functional change but for the record: For three cases
in X86FastISel this will change the order in which the FalseMBB and
TrueMBB of a conditional branch is addedd to the successor/predecessor
lists.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245997 91177308-0d34-0410-b5e6-96231b3b80d8
We are already falling back to SelectionDAG when encountering an shift with UB.
This adds the same checks for shifts with UB that get folded into arithmetic or
logical operations.
This fixes rdar://problem/22345295.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@245499 91177308-0d34-0410-b5e6-96231b3b80d8
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244693 91177308-0d34-0410-b5e6-96231b3b80d8
When we are not emitting the condition for the branch, because the condition is
in another BB or SDAG did the selection for us, then we have to mask the flag in
the register with AND.
This is required when the condition comes from a truncate, because SDAG only
truncates down to a legal size of i32.
This fixes rdar://problem/22161062.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244291 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r243198 and 243304.
Turns out this wasn't the correct fix for this problem. It works only within
FastISel, but fails when the truncate is selected by SDAG.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244287 91177308-0d34-0410-b5e6-96231b3b80d8
To get the successors of a BB we currently do successors(BB) which
ultimately walks the successors of the BB's terminator.
This moves the iterator to TerminatorInst as thats what we're actually
using to do the iteration, and adds a member function to TerminatorInst
to allow us to iterate directly over successors given an instruction.
For example, we can now do
for (auto *Succ : BI->successors())
instead of
for (unsigned i = 0, e = BI->getNumSuccessors(); i != e; ++i)
Reviewed by Tobias Grosser.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244074 91177308-0d34-0410-b5e6-96231b3b80d8
When truncating to non-legal types (such as i16, i8 and i1) always use an AND
instruction to mask out the upper bits. This was only done when the source type
was an i64, but not when the source type was an i32.
This commit fixes this and adds the missing i32 truncate tests.
This fixes rdar://problem/21990703.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@243198 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241775 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid using the TargetMachine owned DataLayout and use the Module owned
one instead. This requires passing the DataLayout up the stack to
ComputeValueVTs().
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11019
From: Mehdi Amini <mehdi.amini@apple.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241773 91177308-0d34-0410-b5e6-96231b3b80d8
The summary is that it moves the mangling earlier and replaces a few
calls to .addExternalSymbol with addSym.
I originally wanted to replace all the uses of addExternalSymbol with
addSym, but noticed it was a lot of work and doesn't need to be done
all at once.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@240395 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM targeting aarch64 doesn't correctly produce aligned accesses for non-aligned
data at -O0/fast-isel (-mno-unaligned-access).
The root cause seems to be in fast-isel not producing unaligned access correctly
for -mno-unaligned-access.
The patch just aborts fast-isel for loads and stores when -mno-unaligned-access is
present.
The regression test is updated to check this new test case (-mno-unaligned-access
together with fast-isel).
Differential Revision: http://reviews.llvm.org/D10360
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239732 91177308-0d34-0410-b5e6-96231b3b80d8
