It is causing sanitizer failures on llvm tests in a bootstrapped compiler. No bot link since it's currently down, but following up to get the bot up.
This reverts commit r319218.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320106 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Found out, at code inspection, that there was a fault in
DAGCombiner::CombineConsecutiveLoads for big-endian targets.
A BUILD_PAIR is always having the least significant bits of
the composite value in element 0. So when we are doing the checks
for consecutive loads, for big endian targets, we should check
if the load to elt 1 is at the lower address and the load
to elt 0 is at the higher address.
Normally this bug only resulted in missed oppurtunities for
doing the load combine. I guess that in some rare situation it
could lead to faulty combines, but I've not seen that happen.
Note that this patch actually will trigger load combine for
some big endian regression tests.
One example is test/CodeGen/PowerPC/anon_aggr.ll where we now get
t76: i64,ch = load<LD8[FixedStack-9]
instead of
t37: i32,ch = load<LD4[FixedStack-10]>
t35: i32,ch = load<LD4[FixedStack-9]>
t41: i64 = build_pair t37, t35
before legalization. Then the legalization will split the LD8
into two loads, so the end result is the same. That should
verify that the transfomation is correct now.
Reviewers: niravd, hfinkel
Reviewed By: niravd
Subscribers: nemanjai, llvm-commits
Differential Revision: https://reviews.llvm.org/D40444
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319771 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319665 91177308-0d34-0410-b5e6-96231b3b80d8
output
As part of the unification of the debug format and the MIR format,
always use `printReg` to print all kinds of registers.
Updated the tests using '_' instead of '%noreg' until we decide which
one we want to be the default one.
Differential Revision: https://reviews.llvm.org/D40421
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319445 91177308-0d34-0410-b5e6-96231b3b80d8
This re-commits everything that was pulled in r314244. The transformation
is off by default (patch to enable it to follow). The code is refactored
to have a single entry-point and provide fine-grained control over patterns
that it selects. This patch also fixes the bugs in the original code.
Everything that failed with the original patch has been re-tested with this
patch (with the transformation turned on). So the patch to turn this on is
soon to follow.
Differential Revision: https://reviews.llvm.org/D38575
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319434 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319427 91177308-0d34-0410-b5e6-96231b3b80d8
- add -ppc-reg-with-percent-prefix option to use %r3 etc as register
names
- split off logic for Darwinish verbose conditional codes into a helper
function
- be explicit about Darwin vs AIX vs GNUish assembler flavors
Based on the patch from Alexandre Yukio Yamashita
Differential Revision: https://reviews.llvm.org/D39016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319381 91177308-0d34-0410-b5e6-96231b3b80d8
Separate the handling of AND/AND8 out from PHI/OR/ISEL checking. The reasoning
is the others need all their operands to be sign/zero extended for their output
to also be sign/zero extended. This is true for AND and sign-extension, but for
zero-extension we only need at least one of the input operands to be zero
extended for the result to also be zero extended.
Differential Revision: https://reviews.llvm.org/D39078
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319289 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a peep hole optimization to remove any redundant toc save
instructions added as part of the call sequence for indirect calls. It removes
any toc saves within a function that are dominated by another toc save.
Differential Revision: https://reviews.llvm.org/D39736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319087 91177308-0d34-0410-b5e6-96231b3b80d8
This patch extends on to rL307174 to not use the power9 vector extract with
variable index instructions when extracting word element 1. For such cases,
the existing selection of MFVSRWZ provides a better sequence.
Differential Revision: https://reviews.llvm.org/D38287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319049 91177308-0d34-0410-b5e6-96231b3b80d8
The instructions addis,addi, bl are used to calculate the address of TLS thread
local variables. These TLS access code sequences are generated repeatedly every
time the thread local variable is accessed. By communicating to Machine CSE that
X2 is guaranteed to have the same value within the same function call (so called
Caller Preserved Physical Register), the redundant TLS access code sequences are
cleaned up.
Differential Revision: https://reviews.llvm.org/D39173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318661 91177308-0d34-0410-b5e6-96231b3b80d8
The VSX versions have the advantage of a full 64-register target whereas the FP
ones have the advantage of lower latency and higher throughput. So what we’re
after is using the faster instructions in low register pressure situations and
using the larger register file in high register pressure situations.
The heuristic chooses between the following 7 pairs of instructions.
PPC::LXSSPX vs PPC::LFSX
PPC::LXSDX vs PPC::LFDX
PPC::STXSSPX vs PPC::STFSX
PPC::STXSDX vs PPC::STFDX
PPC::LXSIWAX vs PPC::LFIWAX
PPC::LXSIWZX vs PPC::LFIWZX
PPC::STXSIWX vs PPC::STFIWX
Differential Revision: https://reviews.llvm.org/D38486
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318651 91177308-0d34-0410-b5e6-96231b3b80d8
Clang implements the -finstrument-functions flag inherited from GCC, which
inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit.
This is useful for getting a trace of how the functions in a program are
executed. Normally, the calls remain even if a function is inlined into another
function, but it is useful to be able to turn this off for users who are
interested in a lower-level trace, i.e. one that reflects what functions are
called post-inlining. (We use this to generate link order files for Chromium.)
LLVM already has a pass for inserting similar instrumentation calls to
mcount(), which it does after inlining. This patch renames and extends that
pass to handle calls both to mcount and the cygprofile functions, before and/or
after inlining as controlled by function attributes.
Differential Revision: https://reviews.llvm.org/D39287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318195 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The current LICM allows sinking an instruction only when it is exposed to exit
blocks through a trivially replacable PHI of which all incoming values are the
same instruction. This change enhance LICM to sink a sinkable instruction
through non-trivially replacable PHIs by spliting predecessors of loop
exits.
Reviewers: hfinkel, majnemer, davidxl, bmakam, mcrosier, danielcdh, efriedma, jtony
Reviewed By: efriedma
Subscribers: nemanjai, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D37163
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317335 91177308-0d34-0410-b5e6-96231b3b80d8
In function DAGCombiner::visitSIGN_EXTEND_INREG, sext can be combined with extload even if sextload is not supported by target, then
if sext is the only user of extload, there is no big difference, no harm no benefit.
if extload has more than one user, the combined sextload may block extload from combining with other zext, causes extra zext instructions generated. As demonstrated by the attached test case.
This patch add the constraint that when sextload is not supported by target, sext can only be combined with extload if it is the only user of extload.
Differential Revision: https://reviews.llvm.org/D39108
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316802 91177308-0d34-0410-b5e6-96231b3b80d8
Not having the subclass data on an MemIntrinsicSDNodes means it was possible
to try to fold 2 nodes with the same operands but differing MMO flags. This
would trip an assertion when trying to refine the alignment between the 2
MachineMemOperands.
Differential Revision: https://reviews.llvm.org/D38898
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316737 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we do not represent runtime preemption in the IR, which has several
drawbacks:
1) The semantics of GlobalValues differ depending on the object file format
you are targeting (as well as the relocation-model and -fPIE value).
2) We have no way of disabling inlining of run time interposable functions,
since in the IR we only know if a function is link-time interposable.
Because of this llvm cannot support elf-interposition semantics.
3) In LTO builds of executables we will have extra knowledge that a symbol
resolved to a local definition and can't be preemptable, but have no way to
propagate that knowledge through the compiler.
This patch adds preemptability specifiers to the IR with the following meaning:
dso_local --> means the compiler may assume the symbol will resolve to a
definition within the current linkage unit and the symbol may be accessed
directly even if the definition is not within this compilation unit.
dso_preemptable --> means that the compiler must assume the GlobalValue may be
replaced with a definition from outside the current linkage unit at runtime.
To ease transitioning dso_preemptable is treated as a 'default' in that
low-level codegen will still do the same checks it did previously to see if a
symbol should be accessed indirectly. Eventually when IR producers emit the
specifiers on all Globalvalues we can change dso_preemptable to mean 'always
access indirectly', and remove the current logic.
Differential Revision: https://reviews.llvm.org/D20217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316668 91177308-0d34-0410-b5e6-96231b3b80d8
Currently a record-form instruction is used for comparison of "greater than -1" and "less than 1" by modifying the predicate (e.g. LT 1 into LE 0) in addition to the naive case of comparison against 0.
This patch also enables emitting a record-form instruction for "less than or equal to -1" (i.e. "less than 0") and "greater than or equal to 1" (i.e. "greater than 0") to increase the optimization opportunities.
Differential Revision: https://reviews.llvm.org/D38941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316647 91177308-0d34-0410-b5e6-96231b3b80d8
This updates the MIRPrinter to include the regclass when printing
virtual register defs, which is already valid syntax for the
parser. That is, given 64 bit %0 and %1 in a "gpr" regbank,
%1(s64) = COPY %0(s64)
would now be written as
%1:gpr(s64) = COPY %0(s64)
While this change alone introduces a bit of redundancy with the
registers block, it allows us to update the tests to be more concise
and understandable and brings us closer to being able to remove the
registers block completely.
Note: We generally only print the class in defs, but there is one
exception. If there are uses without any defs whatsoever, we'll print
the class on all uses. I'm not completely convinced this comes up in
meaningful machine IR, but for now the MIRParser and MachineVerifier
both accept that kind of stuff, so we don't want to have a situation
where we can print something we can't parse.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316479 91177308-0d34-0410-b5e6-96231b3b80d8
If we have the situation where a Swap feeds a Splat we can sometimes change the
index on the Splat and then remove the Swap instruction.
Fixed the test case that was failing and recommit after pulling the original
commit.
Original revision is here: https://reviews.llvm.org/D39009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316478 91177308-0d34-0410-b5e6-96231b3b80d8
Helper functions to identify sign- and zero-extending machine instruction is introduced in rL315888.
This patch makes PPCInstrInfo::optimizeCompareInstr use the helper functions. It simplifies the code and also makes possible more optimizations since the helper can do more analysis than the original check code; I observed about 5000 more compare instructions are eliminated while building LLVM.
Also, this patch fixes a bug in helpers on ANDIo instruction handling due to the order of checks. This bug causes a failure in an existing test case for optimizeCompareInstr.
Differential Revision: https://reviews.llvm.org/D38988
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316071 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables redundant sign- and zero-extension elimination in PowerPC MI Peephole pass.
If the input value of a sign- or zero-extension is known to be already sign- or zero-extended, the operation is redundant and can be eliminated.
One common case is sign-extensions for a method parameter or for a method return value; they must be sign- or zero-extended as defined in PPC ELF ABI.
For example of the following simple code, two extsw instructions are generated before the invocation of int_func and before the return. With this patch, both extsw are eliminated.
void int_func(int);
void ii_test(int a) {
if (a & 1) return int_func(a);
}
Such redundant sign- or zero-extensions are quite common in many programs; e.g. I observed about 60,000 occurrences of the elimination while compiling the LLVM+CLANG.
Differential Revision: https://reviews.llvm.org/D31319
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315888 91177308-0d34-0410-b5e6-96231b3b80d8
Add profitability checks for modifying counted loops to use the mtctr instruction.
The latency of mtctr is only justified if there are more than 4 comparisons that
will be removed as a result. Usually counted loops are formed relatively early
and before unrolling, so most low trip count loops often don't survive. However
we want to ensure that if they do, we do not mistakenly update them to mtctr loops.
Use CodeMetrics to ensure we are only doing this for small loops with small trip counts.
Differential Revision: https://reviews.llvm.org/D38212
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315592 91177308-0d34-0410-b5e6-96231b3b80d8
Currently we produce a bunch of unnecessary code when emitting the
prologue/epilogue for spills/restores. Namely, if the load from stack
slot/store to stack slot instruction is an X-Form instruction, we will
always produce an LIS/ORI sequence for the stack offset.
Furthermore, we have not exploited the P9 vector D-Form loads/stores for this
purpose.
This patch address both issues.
Specifying the D-Form load as the instruction to use for stack spills/reloads
should be safe because:
1. The stack should be aligned according to the ABI
2. If the stack isn't aligned, PPCRegisterInfo::eliminateFrameIndex() will
check for the offset being a multiple of 16 and will convert it to an
X-Form instruction if it isn't.
Differential Revision : https://reviews.llvm.org/D38758
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315500 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is that we assume operand zero of the input to the add instruction
is a register. In this case, the input comes from inline assembly and
operand zero is not a register thereby causing a crash.
The code will bail anyway if the input instruction doesn't have the right
opcode. So do that check first and let short-circuiting prevent the crash.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315285 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This suppresses the generation of .Lcfi labels in our textual assembler.
It was annoying that this generated cascading .Lcfi labels:
llc foo.ll -o - | llvm-mc | llvm-mc
After three trips through MCAsmStreamer, we'd have three labels in the
output when none are necessary. We should only bother creating the
labels and frame data when making a real object file.
This supercedes D38605, which moved the entire .seh_ implementation into
MCObjectStreamer.
This has the advantage that we do more checking when emitting textual
assembly, as a minor efficiency cost. Outputting textual assembly is not
performance critical, so this shouldn't matter.
Reviewers: majnemer, MatzeB
Subscribers: qcolombet, nemanjai, javed.absar, eraman, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D38638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315259 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r314729.
Another bug has been encountered in an out-of-tree target reported by Quentin.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314814 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Take the target's endianness into account when splitting the
debug information in DAGTypeLegalizer::SetExpandedInteger.
This patch fixes so that, for big-endian targets, the fragment
expression corresponding to the high part of a split integer
value is placed at offset 0, in order to correctly represent
the memory address order.
I have attached a PPC32 reproducer where the resulting DWARF
pieces for a 64-bit integer were incorrectly reversed.
Original patch was reverted due to using -stop-after=isel in
the test case (but that is only working when AMDGPU target
is included in the llc build). The test case has now been
updated to use -stop-before=expand-isel-pseudos instead.
Patch by: dstenb
Reviewers: JDevlieghere, aprantl, dblaikie
Reviewed By: JDevlieghere, aprantl, dblaikie
Subscribers: nemanjai
Differential Revision: https://reviews.llvm.org/D38172
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314781 91177308-0d34-0410-b5e6-96231b3b80d8
