This just identifies the intrinsics as candidates for vectorization.
It does not mean we will attempt to vectorize under normal conditions
(the test file is forcing vectorization).
The cost model must be fixed to show that the transform is profitable
in general.
Allowing vectorization with these intrinsics is required to avoid
potential regressions from canonicalizing to the intrinsics from
generic IR:
https://bugs.llvm.org/show_bug.cgi?id=37417
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346661 91177308-0d34-0410-b5e6-96231b3b80d8
Model this function more closely after the BasicTTIImpl version, with
separate handling of loads and stores. For loads, the set of actually loaded
vectors is checked.
This makes it more readable and just slightly more accurate generally.
Review: Ulrich Weigand
https://reviews.llvm.org/D53071
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345998 91177308-0d34-0410-b5e6-96231b3b80d8
Fix PR39417, PR39497
The loop vectorizer may generate runtime SCEV checks for overflow and stride==1
cases, leading to execution of original scalar loop. The latter is forbidden
when optimizing for size. An assert introduced in r344743 triggered the above
PR's showing it does happen. This patch fixes this behavior by preventing
vectorization in such cases.
Differential Revision: https://reviews.llvm.org/D53612
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345959 91177308-0d34-0410-b5e6-96231b3b80d8
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345705 91177308-0d34-0410-b5e6-96231b3b80d8
This commit is a combination of two patches:
* "Fix in getScalarizationOverhead()"
If target returns false in TTI.prefersVectorizedAddressing(), it means the
address registers will not need to be extracted. Therefore, there should
be no operands scalarization overhead for a load instruction.
* "Don't pass the instruction pointer from getMemInstScalarizationCost."
Since VF is always > 1, this is a cost query for an instruction in the
vectorized loop and it should not be evaluated within the scalar
context of the instruction.
Review: Ulrich Weigand, Hal Finkel
https://reviews.llvm.org/D52351https://reviews.llvm.org/D52417
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345603 91177308-0d34-0410-b5e6-96231b3b80d8
masked-interleaving is enabled
Enable interleave-groups under fold-tail scenario for Opt for size compilation;
D50480 added support for vectorizing loops of arbitrary trip-count without a
remiander, which in turn makes everything in the loop conditional, including
interleave-groups if any. It therefore invalidated all interleave-groups
because we didn't have support for vectorizing predicated interleaved-groups
at the time. In the meantime, D53011 introduced this support, so we don't
have to invalidate interleave-groups when masked-interleaved support is enabled.
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: hsaito
Differential Revision: https://reviews.llvm.org/D53559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@345115 91177308-0d34-0410-b5e6-96231b3b80d8
optimizing for size
LV is careful to respect -Os and not to create a scalar epilog in all cases
(runtime tests, trip-counts that require a remainder loop) except for peeling
due to gaps in interleave-groups. This patch fixes that; -Os will now have us
invalidate such interleave-groups and vectorize without an epilog.
The patch also removes a related FIXME comment that is now obsolete, and was
also inaccurate:
"FIXME: return None if loop requiresScalarEpilog(<MaxVF>), or look for a smaller
MaxVF that does not require a scalar epilog."
(requiresScalarEpilog() has nothing to do with VF).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344883 91177308-0d34-0410-b5e6-96231b3b80d8
When optimizing for size, a loop is vectorized only if the resulting vector loop
completely replaces the original scalar loop. This holds if no runtime guards
are needed, if the original trip-count TC does not overflow, and if TC is a
known constant that is a multiple of the VF. The last two TC-related conditions
can be overcome by
1. rounding the trip-count of the vector loop up from TC to a multiple of VF;
2. masking the vector body under a newly introduced "if (i <= TC-1)" condition.
The patch allows loops with arbitrary trip counts to be vectorized under -Os,
subject to the existing cost model considerations. It also applies to loops with
small trip counts (under -O2) which are currently handled as if under -Os.
The patch does not handle loops with reductions, live-outs, or w/o a primary
induction variable, and disallows interleave groups.
(Third, final and main part of -)
Differential Revision: https://reviews.llvm.org/D50480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344743 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Teach vectorizer about vectorizing variant value stores to uniform
address. Similar to rL343028, we do not allow vectorization if we have
multiple stores to the same uniform address.
Cost model already has the change for considering the extract
instruction cost for a variant value store. See added test cases for how
vectorization is done.
The patch also contains changes to the ORE messages.
Reviewers: Ayal, mkuper, anemet, hsaito
Subscribers: rkruppe, llvm-commits
Differential Revision: https://reviews.llvm.org/D52656
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344613 91177308-0d34-0410-b5e6-96231b3b80d8
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344472 91177308-0d34-0410-b5e6-96231b3b80d8
Adding a new reduction pattern match for vectorizing code similar to TSVC s3111:
for (int i = 0; i < N; i++)
if (a[i] > b)
sum += a[i];
This patch adds support for fadd, fsub and fmull, as well as multiple
branches and different (but compatible) instructions (ex. add+sub) in
different branches.
I have forwarded to trunk, added fsub and fmul functionality and
additional tests, but the credit goes to Takahiro, who did most of the
actual work.
Differential Revision: https://reviews.llvm.org/D49168
Patch by Takahiro Miyoshi <takahiro.miyoshi@linaro.org>.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344172 91177308-0d34-0410-b5e6-96231b3b80d8
At the point when we perform `emitTransformedIndex`, we have a broken IR (in
particular, we have Phis for which not every incoming value is properly set). On
such IR, it is illegal to create SCEV expressions, because their internal
simplification process may try to prove some predicates and break when it
stumbles across some broken IR.
The only purpose of using SCEV in this particular place is attempt to simplify
the generated code slightly. It seems that the result isn't worth it, because
some trivial cases (like addition of zero and multiplication by 1) can be
handled separately if needed, but more generally InstCombine is able to achieve
the goals we want to achieve by using SCEV.
This patch fixes a functional crash described in PR39160, and as side-effect it
also generates a bit smarter code in some simple cases. It also may cause some
optimality loss (i.e. we will now generate `mul` by power of `2` instead of
shift etc), but there is nothing what InstCombine could not handle later. In
case of dire need, we can support more trivial cases just in place.
Note that this patch only fixes one particular case of the general problem that
LV misuses SCEV, attempting to create SCEVs or prove predicates on invalid IR.
The general solution, however, seems complex enough.
Differential Revision: https://reviews.llvm.org/D52881
Reviewed By: fhahn, hsaito
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343954 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes PR39099.
When strided loads are predicated, each of them will form an interleaved-group
(with gaps). However, subsequent stages of vectorization (planning and
transformation) assume that if a load is part of an Interleave-Group it is not
predicated, resulting in wrong code - unmasked wide loads are created.
The Interleaving Analysis does take care not to have conditional interleave
groups of size > 1, but until we extend the planning and transformation stages
to support masked-interleave-groups we should also avoid having them for
size == 1.
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D52682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343931 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We are overly conservative in loop vectorizer with respect to stores to loop
invariant addresses.
More details in https://bugs.llvm.org/show_bug.cgi?id=38546
This is the first part of the fix where we start with vectorizing loop invariant
values to loop invariant addresses.
This also includes changes to ORE for stores to invariant address.
Reviewers: anemet, Ayal, mkuper, mssimpso
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50665
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343028 91177308-0d34-0410-b5e6-96231b3b80d8
Support for vectorizing loops with secondary floating-point induction
variables was added in r276554. A primary integer IV is still required
for vectorization to be done. If an FP IV was found, but no integer IV
was found at all (primary or secondary), the attempt to vectorize still
went forward, causing a compiler-crash. This change abandons that
attempt when no integer IV is found. (Vectorizing FP-only cases like
this, rather than bailing out, is discussed as possible future work
in D52327.)
See PR38800 for more information.
Differential Revision: https://reviews.llvm.org/D52327
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
[VPlan] Implement vector code generation support for simple outer loops.
Context: Patch Series #1 for outer loop vectorization support in LV using VPlan. (RFC: http://lists.llvm.org/pipermail/llvm-dev/2017-December/119523.html).
This patch introduces vector code generation support for simple outer loops that are currently supported in the VPlanNativePath. Changes here essentially do the following:
- force vector code generation using explicit vectorize_width
- add conservative early returns in cost model and other places for VPlanNativePath
- add code for setting up outer loop inductions
- support for widening non-induction PHIs that can result from inner loops and uniform conditional branches
- support for generating uniform inner branches
We plan to add a handful C outer loop executable tests once the initial code generation support is committed. This patch is expected to be NFC for the inner loop vectorizer path. Since we are moving in the direction of supporting outer loop vectorization in LV, it may also be time to rename classes such as InnerLoopVectorizer.
Reviewers: fhahn, rengolin, hsaito, dcaballe, mkuper, hfinkel, Ayal
Reviewed By: fhahn, hsaito
Subscribers: dmgreen, bollu, tschuett, rkruppe, rogfer01, llvm-commits
Differential Revision: https://reviews.llvm.org/D50820
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342197 91177308-0d34-0410-b5e6-96231b3b80d8
Move the 2 classes out of LoopVectorize.cpp to make it easier to re-use
them for VPlan outside LoopVectorize.cpp
Reviewers: Ayal, mssimpso, rengolin, dcaballe, mkuper, hsaito, hfinkel, xbolva00
Reviewed By: rengolin, xbolva00
Differential Revision: https://reviews.llvm.org/D49488
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342027 91177308-0d34-0410-b5e6-96231b3b80d8
There were two combines not covered by the check before now, neither of which
actually differed from normal in the benefit analysis.
The most recent seems to be because it was just added at the top of the
function (naturally). The older is from way back in 2008 (r46687) when we just
didn't put those checks in so routinely, and has been diligently maintained
since.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341831 91177308-0d34-0410-b5e6-96231b3b80d8
Fix a latent bug in loop vectorizer which generates incorrect code for
memory accesses that are executed conditionally. As pointed in review,
this bug definitely affects uniform loads and may affect conditional
stores that should have turned into scatters as well).
The code gen for conditionally executed uniform loads on architectures
that support masked gather instructions is broken.
Without this patch, we were unconditionally executing the *conditional*
load in the vectorized version.
This patch does the following:
1. Uniform conditional loads on architectures with gather support will
have correct code generated. In particular, the cost model
(setCostBasedWideningDecision) is fixed.
2. For the recipes which are handled after the widening decision is set,
we use the isScalarWithPredication(I, VF) form which is added in the
patch.
3. Fix the vectorization cost model for scalarization
(getMemInstScalarizationCost): implement and use isPredicatedInst to
identify *all* predicated instructions, not just scalar+predicated. So,
now the cost for scalarization will be increased for maskedloads/stores
and gather/scatter operations. In short, we should be choosing the
gather/scatter in place of scalarization on archs where it is
profitable.
4. We needed to weaken the assert in useEmulatedMaskMemRefHack.
Reviewers: Ayal, hsaito, mkuper
Differential Revision: https://reviews.llvm.org/D51313
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341673 91177308-0d34-0410-b5e6-96231b3b80d8
This is fix for PR38786.
First order recurrence phis were incorrectly treated as uniform,
which caused them to be vectorized as uniform instructions.
Patch by Ayal Zaks and Orivej Desh!
Reviewed by: Anna
Differential Revision: https://reviews.llvm.org/D51639
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341416 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r319889.
Unfortunately, wrapping flags are not a part of SCEV's identity (they
do not participate in computing a hash value or in equality
comparisons) and in fact they could be assigned after the fact w/o
rebuilding a SCEV.
Grep for const_cast's to see quite a few of examples, apparently all
for AddRec's at the moment.
So, if 2 expressions get built in 2 slightly different ways: one with
flags set in the beginning, the other with the flags attached later
on, we may end up with 2 expressions which are exactly the same but
have their operands swapped in one of the commutative N-ary
expressions, and at least one of them will have "sorted by complexity"
invariant broken.
2 identical SCEV's won't compare equal by pointer comparison as they
are supposed to.
A real-world reproducer is added as a regression test: the issue
described causes 2 identical SCEV expressions to have different order
of operands and therefore compare not equal, which in its turn
prevents LoadStoreVectorizer from vectorizing a pair of consecutive
loads.
On a larger example (the source of the test attached, which is a
bugpoint) I have seen even weirder behavior: adding a constant to an
existing SCEV changes the order of the existing terms, for instance,
getAddExpr(1, ((A * B) + (C * D))) returns (1 + (C * D) + (A * B)).
Differential Revision: https://reviews.llvm.org/D40645
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340777 91177308-0d34-0410-b5e6-96231b3b80d8
This is preparation for landing a use-before-def verifier for debug
intrinsics (D46100).
As a drive-by, remove `tail` from debug intrinsic calls because it
doesn't mean anything in that context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340366 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow up change to rL339703, where we now vectorize loops with non-phi
instructions used outside the loop. Note that the cyclic dependency
identification occurs when identifying reduction/induction vars.
We also need to identify that we do not allow users where the PSCEV information
within and outside the loop are different. This was the fix added in rL307837
for PR33706.
Reviewers: Ayal, mkuper, fhahn
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D50778
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340278 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch teaches the loop vectorizer to vectorize loops with non
header phis that have have outside uses. This is because the iteration
dependence distance for these phis can be widened upto VF (similar to
how we do for induction/reduction) if they do not have a cyclic
dependence with header phis. When identifying reduction/induction/first
order recurrence header phis, we already identify if there are any cyclic
dependencies that prevents vectorization.
The vectorizer is taught to extract the last element from the vectorized
phi and update the scalar loop exit block phi to contain this extracted
element from the vector loop.
This patch can be extended to vectorize loops where instructions other
than phis have outside uses.
Reviewers: Ayal, mkuper, mssimpso, efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50579
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339703 91177308-0d34-0410-b5e6-96231b3b80d8
Added a test case to reduction showing where it's illegal to identify
vectorize a loop.
Resetting the reduction var during loop iterations disallows us from
widening the dependency cycle to VF, thereby making it illegal to
vectorize the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: truncateToMinimalBitWidths() doesn't handle all Instructions and the worst case is compiler crash via llvm_unreachable(). Fix is to add a case to handle PHINode and changed the worst case to NO-OP (from compiler crash).
Reviewers: sbaranga, mssimpso, hsaito
Reviewed By: hsaito
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49461
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337861 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes order of transform in InstCombineCompares to avoid
performing transforms based on ranges which produce complex bit arithmetics
before more simple things (like folding with constants) are done. See PR37636
for the motivating example.
Differential Revision: https://reviews.llvm.org/D48584
Reviewed By: spatel, lebedev.ri
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336172 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a custom trunc store lowering for v4i8 vector types.
Since there is not v.4b register, the v4i8 is promoted to v4i16 (v.4h)
and default action for v4i8 is to extract each element and issue 4
byte stores.
A better strategy would be to extended the promoted v4i16 to v8i16
(with undef elements) and extract and store the word lane which
represents the v4i8 subvectores. The construction:
define void @foo(<4 x i16> %x, i8* nocapture %p) {
%0 = trunc <4 x i16> %x to <4 x i8>
%1 = bitcast i8* %p to <4 x i8>*
store <4 x i8> %0, <4 x i8>* %1, align 4, !tbaa !2
ret void
}
Can be optimized from:
umov w8, v0.h[3]
umov w9, v0.h[2]
umov w10, v0.h[1]
umov w11, v0.h[0]
strb w8, [x0, #3]
strb w9, [x0, #2]
strb w10, [x0, #1]
strb w11, [x0]
ret
To:
xtn v0.8b, v0.8h
str s0, [x0]
ret
The patch also adjust the memory cost for autovectorization, so the C
code:
void foo (const int *src, int width, unsigned char *dst)
{
for (int i = 0; i < width; i++)
*dst++ = *src++;
}
can be vectorized to:
.LBB0_4: // %vector.body
// =>This Inner Loop Header: Depth=1
ldr q0, [x0], #16
subs x12, x12, #4 // =4
xtn v0.4h, v0.4s
xtn v0.8b, v0.8h
st1 { v0.s }[0], [x2], #4
b.ne .LBB0_4
Instead of byte operations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335735 91177308-0d34-0410-b5e6-96231b3b80d8
