The Globals table is a hash table keyed on symbol name, so
it's possible to lookup symbols by name in O(1) time. Add
a function to the globals stream to do this, and add an option
to llvm-pdbutil to exercise this, then use it to write some
tests to verify correctness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343951 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Before this change, LLVM would always describe locals on the stack as
being relative to some specific register, RSP, ESP, EBP, ESI, etc.
Variables in stack memory are pretty common, so there is a special
S_DEFRANGE_FRAMEPOINTER_REL symbol for them. This change uses it to
reduce the size of our debug info.
On top of the size savings, there are cases on 32-bit x86 where local
variables are addressed from ESP, but ESP changes across the function.
Unlike in DWARF, there is no FPO data to describe the stack adjustments
made to push arguments onto the stack and pop them off after the call,
which makes it hard for the debugger to find the local variables in
frames further up the stack.
To handle this, CodeView has a special VFRAME register, which
corresponds to the $T0 variable set by our FPO data in 32-bit. Offsets
to local variables are instead relative to this value.
This is part of PR38857.
Reviewers: hans, zturner, javed.absar
Subscribers: aprantl, hiraditya, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D52217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343543 91177308-0d34-0410-b5e6-96231b3b80d8
This allows the native reader to find records of class/struct/
union type and dump them. This behavior is tested by using the
diadump subcommand against golden output produced by actual DIA
SDK on the same PDB file, and again using pretty -native to
confirm that we actually dump the classes. We don't find class
members or anything like that yet, for now it's just the class
itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342779 91177308-0d34-0410-b5e6-96231b3b80d8
There were several issues with the previous implementation.
1) There were no tests.
2) We didn't support creating PDBSymbolTypePointer records for
builtin types since those aren't described by LF_POINTER
records.
3) We didn't support a wide enough variety of builtin types even
ignoring pointers.
This patch fixes all of these issues. In order to add tests,
it's helpful to be able to ignore the symbol index id hierarchy
because it makes the golden output from the DIA version not match
our output, so I've extended the dumper to disable dumping of id
fields.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342493 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341999 91177308-0d34-0410-b5e6-96231b3b80d8
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341228 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339907 91177308-0d34-0410-b5e6-96231b3b80d8
When compiling with /arch:AVX512 and optimizations turned on,
we could crash while emitting debug info because we did not
have CodeView register constants for the AVX 512 register
set defined. This patch defines them.
Differential Revision: https://reviews.llvm.org/D50819
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@339893 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332669 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
When investigating bugs in PDB generation, the first step is
often to do the same link with link.exe and then compare PDBs.
But comparing PDBs is hard because two completely different byte
sequences can both be correct, so it hampers the investigation when
you also have to spend time figuring out not just which bytes are
different, but also if the difference is meaningful.
This patch fixes a couple of cases related to string table emission,
hash table emission, and the order in which we emit strings that
makes more of our bytes the same as the bytes generated by MS PDBs.
Differential Revision: https://reviews.llvm.org/D44810
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328348 91177308-0d34-0410-b5e6-96231b3b80d8
NFC, this just renames some methods to better express what they
do, and also adds a few helper methods to add some symmetry to the
API in a few places (for example there was a getStringFromId but not
a getIdFromString method in the string table).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328221 91177308-0d34-0410-b5e6-96231b3b80d8
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328014 91177308-0d34-0410-b5e6-96231b3b80d8
The issue causing this to fail in certain configurations
should be fixed.
It was due to the fact that DIA apparently expects there to be
a null string at ID 1 in the string table. I'm not sure why this
is important but it seems to make a difference, so set it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328002 91177308-0d34-0410-b5e6-96231b3b80d8
This is causing a test failure on a certain bot, so I'm removing
this temporarily until we can figure out the source of the error.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327903 91177308-0d34-0410-b5e6-96231b3b80d8
Natvis is a debug language supported by Visual Studio for
specifying custom visualizers. The /NATVIS option is an
undocumented link.exe flag which will take a .natvis file
and "inject" it into the PDB. This way, you can ship the
debug visualizers for a program along with the PDB, which
is very useful for postmortem debugging.
This is implemented by adding a new "named stream" to the
PDB with a special name of /src/files/<natvis file name>
and simply copying the contents of the xml into this file.
Additionally, we need to emit a single stream named
/src/headerblock which contains a hash table of embedded
files to records describing them.
This patch adds this functionality, including the /NATVIS
option to lld-link.
Differential Revision: https://reviews.llvm.org/D44328
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@327895 91177308-0d34-0410-b5e6-96231b3b80d8
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326260 91177308-0d34-0410-b5e6-96231b3b80d8
Based on a profile, a couple of hot spots were identified in the
main type merging loop. The code was simplified, a few loops
were re-arranged, and some outlined functions were inlined. This
speeds up type merging by a decent amount, shaving around 3-4 seconds
off of a 40 second link in my test case.
Differential Revision: https://reviews.llvm.org/D42559
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323790 91177308-0d34-0410-b5e6-96231b3b80d8
There's some abstraction overhead in the underlying
mechanisms that were being used, and it was leading to an
abundance of small but not-free copies being made. This
showed up on a profile. Eliminating this and going back to
a low-level byte-based implementation speeds up lld with
/DEBUG between 10 and 15%.
Differential Revision: https://reviews.llvm.org/D42148
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322871 91177308-0d34-0410-b5e6-96231b3b80d8
This is a special code that indicates that it's a function id.
While I'm still not certain how to interpret these, we definitely
should *not* be using these values as indices into an array directly.
For now, when we encounter one of these, just print the numeric value.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320775 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit ac5edc198eb612f82293850c3488042708b1c5fa.
Apparently this doesn't cover all the bases, so some compilers
and standard libraries still think this is not trivially copyable
even though it is. Reverting this back to an MSVC-only check for
now so that at least we have some coverage.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320739 91177308-0d34-0410-b5e6-96231b3b80d8
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320719 91177308-0d34-0410-b5e6-96231b3b80d8
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320649 91177308-0d34-0410-b5e6-96231b3b80d8
This was storing the hash alongside the key so that the hash
doesn't need to be re-computed every time, but in doing so it
was allocating a structure to keep the key size small in the
DenseMap. This is a noble goal, but it also leads to a pointer
indirection on every probe, and this cost of this pointer
indirection ends up being higher than the cost of having a
slightly larger entry in the hash table. Removing this not only
simplifies the code, but yields a small but noticeable
performance improvement in the type merging algorithm.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319493 91177308-0d34-0410-b5e6-96231b3b80d8
This class had some code that would automatically remap type
indices before hashing and serializing. The only caller of
this method was the TypeStreamMerger anyway, and the method
doesn't make general sense, and prevents making certain future
improvements to the class. So, factoring this up one level
into the TypeStreamMerger where it belongs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319377 91177308-0d34-0410-b5e6-96231b3b80d8
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319345 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319198 91177308-0d34-0410-b5e6-96231b3b80d8
(this header is not fully implemented (the out of line function
writeTypeRecordKind is called in an inline function but never
implemented - this fails to link under modular code generation) and not
included anywhere)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318987 91177308-0d34-0410-b5e6-96231b3b80d8
This adds type index discovery and dumper support for symbol record kind
0x1168, which is a list of inlined function ids. This symbol kind is
undocumented, but S_INLINEES is consistent with the existing
nomenclature.
Fixes PR34222
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316398 91177308-0d34-0410-b5e6-96231b3b80d8
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314821 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This intrinsic represents a label with a list of associated metadata
strings. It is modelled as reading and writing inaccessible memory so
that it won't be removed as dead code. I think the intention is that the
annotation strings should appear at most once in the debug info, so I
marked it noduplicate. We are allowed to inline code with annotations as
long as we strip the annotation, but that can be done later.
Reviewers: majnemer
Subscribers: eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D36904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312569 91177308-0d34-0410-b5e6-96231b3b80d8
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312358 91177308-0d34-0410-b5e6-96231b3b80d8
