This reverts commit r342387 as it's showing significant performance
regressions in a number of benchmarks. Followed up with the
committer and original thread with an example and will get performance
numbers before recommitting.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343522 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit c4baf7c2f06ff5459c4f5998ce980346e72bff97.
Broke the bots, and should really be in Transforms/Coroutines
instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343337 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: This patch adds bindings to C and Go for addCoroutinePassesToExtensionPoints, which is used to add coroutine passes to the correct locations in PassManagerBuilder.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: mehdi_amini, modocache, llvm-commits
Differential Revision: https://reviews.llvm.org/D51642
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343336 91177308-0d34-0410-b5e6-96231b3b80d8
This patch turns LoopInterchange into a loop pass. It now only
considers top-level loops and tries to move the innermost loop to the
optimal position within the loop nest. By only looking at top-level
loops, we might miss a few opportunities the function pass would get
(e.g. if we have a loop nest of 3 loops, in the function pass
we might process loops at level 1 and 2 and move the inner most loop to
level 1, and then we process loops at levels 0, 1, 2 and interchange
again, because we now have a different inner loop). But I think it would
be better to handle such cases by picking the best inner loop from the
start and avoid re-visiting the same loops again.
The biggest advantage of it being a function pass is that it interacts
nicely with the other loop passes. Without this patch, there are some
performance regressions on AArch64 with loop interchanging enabled,
where no loops were interchanged, but we missed out on some other loop
optimizations.
It also removes the SimplifyCFG run. We are just changing branches, so
the CFG should not be more complicated, besides the additional 'unique'
preheaders this pass might create.
Reviewers: chandlerc, efriedma, mcrosier, javed.absar, xbolva00
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D51702
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343308 91177308-0d34-0410-b5e6-96231b3b80d8
Rebase rL341954 since https://bugs.llvm.org/show_bug.cgi?id=38912
has been fixed by rL342055.
Precommit testing performed:
* Overnight runs of csmith comparing the output between programs
compiled with gvn-hoist enabled/disabled.
* Bootstrap builds of clang with UbSan/ASan configurations.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342387 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts rL341954.
The builder `sanitizer-x86_64-linux-bootstrap-ubsan` has been
failing with timeouts at stage2 clang/ubsan:
[3065/3073] Linking CXX executable bin/lld
command timed out: 1200 seconds without output running python
../sanitizer_buildbot/sanitizers/buildbot_selector.py,
attempting to kill
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342001 91177308-0d34-0410-b5e6-96231b3b80d8
Find cold blocks based on profile information (or optionally with static analysis).
Forward propagate profile information to all cold-blocks.
Outline a cold region.
Set calling conv and prof hint for the callsite of the outlined function.
Worked in collaboration with: Sebastian Pop <s.pop@samsung.com>
Differential Revision: https://reviews.llvm.org/D50658
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341669 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Control height reduction merges conditional blocks of code and reduces the
number of conditional branches in the hot path based on profiles.
if (hot_cond1) { // Likely true.
do_stg_hot1();
}
if (hot_cond2) { // Likely true.
do_stg_hot2();
}
->
if (hot_cond1 && hot_cond2) { // Hot path.
do_stg_hot1();
do_stg_hot2();
} else { // Cold path.
if (hot_cond1) {
do_stg_hot1();
}
if (hot_cond2) {
do_stg_hot2();
}
}
This speeds up some internal benchmarks up to ~30%.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: xbolva00, dmgreen, mehdi_amini, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D50591
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341386 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r338240 because it was causing OOMs on the UBSan
buildbot when building clang/lib/Sema/SemaChecking.cpp
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338297 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this change, the WholeProgramDevirt pass, which requires the
TargetLibraryInfo, will construct one from the default triple.
Fixes PR38139.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49278
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337750 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder Loop
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336062 91177308-0d34-0410-b5e6-96231b3b80d8
and diretory.
Also cleans up all the associated naming to be consistent and removes
the public access to the pass ID which was unused in LLVM.
Also runs clang-format over parts that changed, which generally cleans
up a bunch of formatting.
This is in preparation for doing some internal cleanups to the pass.
Differential Revision: https://reviews.llvm.org/D47352
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336028 91177308-0d34-0410-b5e6-96231b3b80d8
Since we are now producing a summary also for regular LTO builds, we
need to run the NameAnonGlobals pass in those cases as well (the
summary cannot handle anonymous globals).
See https://reviews.llvm.org/D34156 for details on the original change.
This reverts commit 6c9ee4a4a438a8059aacc809b2dd57128fccd6b3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335385 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first pass in the main pipeline to use the legacy PM's
ability to run function analyses "on demand". Unfortunately, it turns
out there are bugs in that somewhat-hacky approach. At the very least,
it leaks memory and doesn't support -debug-pass=Structure. Unclear if
there are larger issues or not, but this should get the sanitizer bots
back to green by fixing the memory leaks.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335320 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for generating a call graph profile from Branch Frequency Info.
The CGProfile module pass simply gets the block profile count for each BB and scans for call instructions. For each call instruction it adds an edge from the current function to the called function with the current BB block profile count as the weight.
After scanning all the functions, it generates an appending module flag containing the data. The format looks like:
!llvm.module.flags = !{!0}
!0 = !{i32 5, !"CG Profile", !1}
!1 = !{!2, !3, !4} ; List of edges
!2 = !{void ()* @a, void ()* @b, i64 32} ; Edge from a to b with a weight of 32
!3 = !{void (i1)* @freq, void ()* @a, i64 11}
!4 = !{void (i1)* @freq, void ()* @b, i64 20}
Differential Revision: https://reviews.llvm.org/D48105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335306 91177308-0d34-0410-b5e6-96231b3b80d8
loop-cleanup passes at the beginning of the loop pass pipeline, and
re-enqueue loops after even trivial unswitching.
This will allow us to much more consistently avoid simplifying code
while doing trivial unswitching. I've also added a test case that
specifically shows effective iteration using this technique.
I've unconditionally updated the new PM as that is always using the
SimpleLoopUnswitch pass, and I've made the pipeline changes for the old
PM conditional on using this new unswitch pass. I added a bunch of
comments to the loop pass pipeline in the old PM to make it more clear
what is going on when reviewing.
Hopefully this will unblock doing *partial* unswitching instead of just
full unswitching.
Differential Revision: https://reviews.llvm.org/D47408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333493 91177308-0d34-0410-b5e6-96231b3b80d8
This is a simple implementation of the unroll-and-jam classical loop
optimisation.
The basic idea is that we take an outer loop of the form:
for i..
ForeBlocks(i)
for j..
SubLoopBlocks(i, j)
AftBlocks(i)
Instead of doing normal inner or outer unrolling, we unroll as follows:
for i... i+=2
ForeBlocks(i)
ForeBlocks(i+1)
for j..
SubLoopBlocks(i, j)
SubLoopBlocks(i+1, j)
AftBlocks(i)
AftBlocks(i+1)
Remainder
So we have unrolled the outer loop, then jammed the two inner loops into
one. This can lead to a simpler inner loop if memory accesses can be shared
between the now-jammed loops.
To do this we have to prove that this is all safe, both for the memory
accesses (using dependence analysis) and that ForeBlocks(i+1) can move before
AftBlocks(i) and SubLoopBlocks(i, j).
Differential Revision: https://reviews.llvm.org/D41953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333358 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Follow-up to D43690, the EliminateAvailableExternally pass currently
runs under -O0 and -O2 and up. Under -O1 we would still want to drop
available_externally symbols to reduce space without inlining having
run.
Reviewers: tejohnson
Reviewed By: tejohnson
Subscribers: mehdi_amini, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D46093
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330961 91177308-0d34-0410-b5e6-96231b3b80d8
(notionally Scalar.h is part of libLLVMScalarOpts, so it shouldn't be
included by InstCombine which doesn't/shouldn't need to depend on
ScalarOpts)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330669 91177308-0d34-0410-b5e6-96231b3b80d8
Fixes layering - Transforms/Utils shouldn't depend on including a Scalar
or IPO header, because Scalar and IPO depend on Utils.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328717 91177308-0d34-0410-b5e6-96231b3b80d8
Combine expression patterns to form expressions with fewer, simple instructions.
This pass does not modify the CFG.
For example, this pass reduce width of expressions post-dominated by TruncInst
into smaller width when applicable.
It differs from instcombine pass in that it contains pattern optimization that
requires higher complexity than the O(1), thus, it should run fewer times than
instcombine pass.
Differential Revision: https://reviews.llvm.org/D38313
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323321 91177308-0d34-0410-b5e6-96231b3b80d8
Clang implements the -finstrument-functions flag inherited from GCC, which
inserts calls to __cyg_profile_func_{enter,exit} on function entry and exit.
This is useful for getting a trace of how the functions in a program are
executed. Normally, the calls remain even if a function is inlined into another
function, but it is useful to be able to turn this off for users who are
interested in a lower-level trace, i.e. one that reflects what functions are
called post-inlining. (We use this to generate link order files for Chromium.)
LLVM already has a pass for inserting similar instrumentation calls to
mcount(), which it does after inlining. This patch renames and extends that
pass to handle calls both to mcount and the cygprofile functions, before and/or
after inlining as controlled by function attributes.
Differential Revision: https://reviews.llvm.org/D39287
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318195 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In ThinLTO compilation, we exit populateModulePassManager early and
were not adding PM extension passes meant to run at the end of the
pipeline. This includes sanitizer passes. Add these passes before
the early exit.
A test will be added to projects/compiler-rt.
Reviewers: pcc
Subscribers: mehdi_amini, inglorion, llvm-commits
Differential Revision: https://reviews.llvm.org/D39565
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317714 91177308-0d34-0410-b5e6-96231b3b80d8
This recommit r317351 after fixing a buildbot failure.
Original commit message:
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317362 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change add a pass which tries to split a call-site to pass
more constrained arguments if its argument is predicated in the control flow
so that we can expose better context to the later passes (e.g, inliner, jump
threading, or IPA-CP based function cloning, etc.).
As of now we support two cases :
1) If a call site is dominated by an OR condition and if any of its arguments
are predicated on this OR condition, try to split the condition with more
constrained arguments. For example, in the code below, we try to split the
call site since we can predicate the argument (ptr) based on the OR condition.
Split from :
if (!ptr || c)
callee(ptr);
to :
if (!ptr)
callee(null ptr) // set the known constant value
else if (c)
callee(nonnull ptr) // set non-null attribute in the argument
2) We can also split a call-site based on constant incoming values of a PHI
For example,
from :
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2, label %BB1
BB1:
br label %BB2
BB2:
%p = phi i32 [ 0, %BB0 ], [ 1, %BB1 ]
call void @bar(i32 %p)
to
BB0:
%c = icmp eq i32 %i1, %i2
br i1 %c, label %BB2-split0, label %BB1
BB1:
br label %BB2-split1
BB2-split0:
call void @bar(i32 0)
br label %BB2
BB2-split1:
call void @bar(i32 1)
br label %BB2
BB2:
%p = phi i32 [ 0, %BB2-split0 ], [ 1, %BB2-split1 ]
Reviewers: davidxl, huntergr, chandlerc, mcrosier, eraman, davide
Reviewed By: davidxl
Subscribers: sdesmalen, ashutosh.nema, fhahn, mssimpso, aemerson, mgorny, mehdi_amini, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D39137
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317351 91177308-0d34-0410-b5e6-96231b3b80d8
This is necessary because DCE is applied to full LTO modules. Without
this change, a reference from a dead ThinLTO global to a dead full
LTO global will result in an undefined reference at link time.
This problem is only observable when --gc-sections is disabled, or
when targeting COFF, as the COFF port of lld requires all symbols to
have a definition even if all references are dead (this is consistent
with link.exe).
This change also adds an EliminateAvailableExternally pass at -O0. This
is necessary to handle the situation on Windows where a non-prevailing
copy of a linkonce_odr function has an SEH filter function; any
such filters must be DCE'd because they will contain a call to the
llvm.localrecover intrinsic, passing as an argument the address of the
function that the filter belongs to, and llvm.localrecover requires
this function to be defined locally.
Fixes PR35142.
Differential Revision: https://reviews.llvm.org/D39484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317108 91177308-0d34-0410-b5e6-96231b3b80d8
This is no-functional-change-intended.
This is repackaging the functionality of D30333 (defer switch-to-lookup-tables) and
D35411 (defer folding unconditional branches) with pass parameters rather than a named
"latesimplifycfg" pass. Now that we have individual options to control the functionality,
we could decouple when these fire (but that's an independent patch if desired).
The next planned step would be to add another option bit to disable the sinking transform
mentioned in D38566. This should also make it clear that the new pass manager needs to
be updated to limit simplifycfg in the same way as the old pass manager.
Differential Revision: https://reviews.llvm.org/D38631
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316835 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new pass for attaching !callees metadata to indirect call
sites. The pass propagates values to call sites by performing an IPSCCP-like
analysis using the generic sparse propagation solver. For indirect call sites
having a small set of possible callees, the attached metadata indicates what
those callees are. The metadata can be used to facilitate optimizations like
intersecting the function attributes of the possible callees, refining the call
graph, performing indirect call promotion, etc.
Differential Revision: https://reviews.llvm.org/D37355
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316576 91177308-0d34-0410-b5e6-96231b3b80d8
This is a vestige from the GCC-3 days, which disables IPO passes
when set. I don't think anybody actually uses it as there are
several IPO passes which still run with this flag set and
nobody complained/noticed. This reduces the delta between
current and new pass manager and allows us to easily review
the difference when we decide to flip the switch (or audit
which passes should run, FWIW).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315043 91177308-0d34-0410-b5e6-96231b3b80d8
Run GDCE slightly later so that we don't have to repeat it
twice when preparing for Thin. Thanks to Mehdi for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314999 91177308-0d34-0410-b5e6-96231b3b80d8
The inliner performs some kind of dead code elimination as it goes,
but there are cases that are not really caught by it. We might
at some point consider teaching the inliner about them, but it
is OK for now to run GlobalOpt + GlobalDCE in tandem as their
benefits generally outweight the cost, making the whole pipeline
faster.
This fixes PR34652.
Differential Revision: https://reviews.llvm.org/D38154
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314997 91177308-0d34-0410-b5e6-96231b3b80d8
This is intended to be a superset of the functionality from D31037 (EarlyCSE) but implemented
as an independent pass, so there's no stretching of scope and feature creep for an existing pass.
I also proposed a weaker version of this for SimplifyCFG in D30910. And I initially had almost
this same functionality as an addition to CGP in the motivating example of PR31028:
https://bugs.llvm.org/show_bug.cgi?id=31028
The advantage of positioning this ahead of SimplifyCFG in the pass pipeline is that it can allow
more flattening. But it needs to be after passes (InstCombine) that could sink a div/rem and
undo the hoisting that is done here.
Decomposing remainder may allow removing some code from the backend (PPC and possibly others).
Differential Revision: https://reviews.llvm.org/D37121
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312862 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
GlobalExtensions is dereferenced twice, once for iteration and then a check if it is empty.
As a ManagedStatic this dereference forces it's construction which is unnecessary.
Reviewers: efriedma, davide, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: chapuni, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D33381
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307229 91177308-0d34-0410-b5e6-96231b3b80d8
