This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313271 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This intrinsic represents a label with a list of associated metadata
strings. It is modelled as reading and writing inaccessible memory so
that it won't be removed as dead code. I think the intention is that the
annotation strings should appear at most once in the debug info, so I
marked it noduplicate. We are allowed to inline code with annotations as
long as we strip the annotation, but that can be done later.
Reviewers: majnemer
Subscribers: eraman, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D36904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312569 91177308-0d34-0410-b5e6-96231b3b80d8
CFI instructions that set appropriate cfa offset and cfa register are now
inserted in emitEpilogue() in X86FrameLowering.
Majority of the changes in this patch:
1. Ensure that CFI instructions do not affect code generation.
2. Enable maintaining correct information about cfa offset and cfa register
in a function when basic blocks are reordered, merged, split, duplicated.
These changes are target independent and described below.
Changed CFI instructions so that they:
1. are duplicable
2. are not counted as instructions when tail duplicating or tail merging
3. can be compared as equal
Add information to each MachineBasicBlock about cfa offset and cfa register
that are valid at its entry and exit (incoming and outgoing CFI info). Add
support for updating this information when basic blocks are merged, split,
duplicated, created. Add a verification pass (CFIInfoVerifier) that checks
that outgoing cfa offset and register of predecessor blocks match incoming
values of their successors.
Incoming and outgoing CFI information is used by a late pass
(CFIInstrInserter) that corrects CFA calculation rule for a basic block if
needed. That means that additional CFI instructions get inserted at basic
block beginning to correct the rule for calculating CFA. Having CFI
instructions in function epilogue can cause incorrect CFA calculation rule
for some basic blocks. This can happen if, due to basic block reordering,
or the existence of multiple epilogue blocks, some of the blocks have wrong
cfa offset and register values set by the epilogue block above them.
Patch by Violeta Vukobrat.
Differential Revision: https://reviews.llvm.org/D18046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306529 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces an LLVM intrinsic and a target opcode for custom event
logging in XRay. Initially, its use case will be to allow users of XRay to log
some type of string ("poor man's printf"). The target opcode compiles to a noop
sled large enough to enable calling through to a runtime-determined relative
function call. At runtime, when X-Ray is enabled, the sled is replaced by
compiler-rt with a trampoline to the logic for creating the custom log entries.
Future patches will implement the compiler-rt parts and clang-side support for
emitting the IR corresponding to this intrinsic.
Reviewers: timshen, dberris
Subscribers: igorb, pelikan, rSerge, timshen, echristo, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D27503
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302405 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Predicate<> now has a field to indicate how often it must be recomputed.
Currently, there are two frequencies, per-module (RecomputePerFunction==0)
and per-function (RecomputePerFunction==1). Per-function predicates are
currently recomputed more frequently than necessary since the only predicate
in this category is cheap to test. Per-module predicates are now computed in
getSubtargetImpl() while per-function predicates are computed in selectImpl().
Tablegen now manages the PredicateBitset internally. It should only be
necessary to add the required includes.
Also fixed a problem revealed by the test case where
constrainSelectedInstRegOperands() would attempt to tie operands that
BuildMI had already tied.
Reviewers: ab, qcolombet, t.p.northover, rovka, aditya_nandakumar
Reviewed By: rovka
Subscribers: kristof.beyls, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D32491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301750 91177308-0d34-0410-b5e6-96231b3b80d8
We used to have 3 side effect flags, but as of r222809, we only have
hasSideEffects. Change the comment to reflect that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298220 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a new kind of MachineOperand: MO_Placeholder.
This operand must not appear in the MIR and only exists as a way of
creating an 'uninitialized' operand until a matcher function overwrites it.
Depends on D30046, D29712
Reviewers: t.p.northover, ab, rovka, aditya_nandakumar, javed.absar, qcolombet
Reviewed By: qcolombet
Subscribers: dberris, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30089
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297782 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change allows usage of store instruction for implicit null check.
Memory Aliasing Analisys is not used and change conservatively supposes
that any store and load may access the same memory. As a result
re-ordering of store-store, store-load and load-store is prohibited.
Patch by Serguei Katkov!
Reviewers: reames, sanjoy
Reviewed By: sanjoy
Subscribers: atrick, llvm-commits
Differential Revision: https://reviews.llvm.org/D29400
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294338 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292478 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292367 91177308-0d34-0410-b5e6-96231b3b80d8
Several buildbots encountered a crash in tablegen when building this commit.
Reverting while I investigate the cause.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292132 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a basic tablegen backend that analyzes the SelectionDAG
patterns to find simple ones that are eligible for GlobalISel-emission.
That's similar to FastISel, with one notable difference: we're not fed
ISD opcodes, so we need to map the SDNode operators to generic opcodes.
That's done using GINodeEquiv in TargetGlobalISel.td.
Otherwise, this is mostly boilerplate, and lots of filtering of any kind
of "complicated" pattern. On AArch64, this is sufficient to match G_ADD
up to s64 (to ADDWrr/ADDXrr) and G_BR (to B).
Differential Revision: https://reviews.llvm.org/D26878
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290284 91177308-0d34-0410-b5e6-96231b3b80d8
hwloop regression tests. These tests pass locally; will be investigating
where these differences come from.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281306 91177308-0d34-0410-b5e6-96231b3b80d8
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281035 91177308-0d34-0410-b5e6-96231b3b80d8
And associated commits, as they broke the Thumb bots.
This reverts commit r280935.
This reverts commit r280891.
This reverts commit r280888.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280967 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows specifying instructions that are available only in specific assembler variant. If AsmVariantName is specified then instruction will be presented only in MatchTable for this variant. If not specified then assembler variants will be determined based on AsmString.
Also this allows splitting assembler match tables in same way as it is done in dissasembler.
Reviewers: ab, tstellarAMD, craig.topper, vpykhtin
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D24249
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280952 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change promotes the 'isTailCall(...)' member function to
TargetInstrInfo as a query interface for determining on a per-target
basis whether a given MachineInstr is a tail call instruction. We build
upon this in the XRay instrumentation pass to emit special sleds for
tail call optimisations, where we emit the correct kind of sled.
The tail call sleds look like a mix between the function entry and
function exit sleds. Form-wise, the sled comes before the "jmp"
instruction that implements the tail call similar to how we do it for
the function entry sled. Functionally, because we know this is a tail
call, it behaves much like an exit sled -- i.e. at runtime we may use
the exit trampolines instead of a different kind of trampoline.
A follow-up change to recognise these sleds will be done in compiler-rt,
so that we can start intercepting these initially as exits, but also
have the option to have different log entries to more accurately reflect
that this is actually a tail call.
Reviewers: echristo, rSerge, majnemer
Subscribers: mehdi_amini, dberris, llvm-commits
Differential Revision: https://reviews.llvm.org/D23986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280334 91177308-0d34-0410-b5e6-96231b3b80d8
This is for a situation where the encoding for a register may be
different depending on the specific operand. For some instructions,
we want to apply additional restrictions beyond the encoding's
constraints.
In AMDGPU some operands are VSrc_32, using the VS_32 pseudo register
class which accept VGPRs, SGPRs, or immediates in the encoding.
Some specific instructions with the same encoding operand do not want
to allow immediates or SGPRs, but the encoding format is different
in this case than a regular VGPR_32 operand.
This allows specifying the encoding should be treated the same
without introducing yet another dummy register class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275929 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In this patch we implement the following parts of XRay:
- Supporting a function attribute named 'function-instrument' which currently only supports 'xray-always'. We should be able to use this attribute for other instrumentation approaches.
- Supporting a function attribute named 'xray-instruction-threshold' used to determine whether a function is instrumented with a minimum number of instructions (IR instruction counts).
- X86-specific nop sleds as described in the white paper.
- A machine function pass that adds the different instrumentation marker instructions at a very late stage.
- A way of identifying which return opcode is considered "normal" for each architecture.
There are some caveats here:
1) We don't handle PATCHABLE_RET in platforms other than x86_64 yet -- this means if IR used PATCHABLE_RET directly instead of a normal ret, instruction lowering for that platform might do the wrong thing. We think this should be handled at instruction selection time to by default be unpacked for platforms where XRay is not availble yet.
2) The generated section for X86 is different from what is described from the white paper for the sole reason that LLVM allows us to do this neatly. We're taking the opportunity to deviate from the white paper from this perspective to allow us to get richer information from the runtime library.
Reviewers: sanjoy, eugenis, kcc, pcc, echristo, rnk
Subscribers: niravd, majnemer, atrick, rnk, emaste, bmakam, mcrosier, mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D19904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275367 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change allows to specify "DefaultMethod" for optional operand (IsOptional = 1) in AsmOperandClass that return default value for operand. This is used in convertToMCInst to set default values in MCInst.
Previously if you wanted to set default value for operand you had to create custom converter method. With this change it is possible to use standard converters even when optional operands presented.
Reviewers: tstellarAMD, ab, craig.topper
Subscribers: jyknight, dsanders, arsenm, nhaustov, llvm-commits
Differential Revision: http://reviews.llvm.org/D18242
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268726 91177308-0d34-0410-b5e6-96231b3b80d8
This operation may branch to the handler block and we do not want it
to happen anywhere within the basic block.
Moreover, by marking it "terminator and branch" the machine verifier
does not wrongly assume (because of AnalyzeBranch not knowing better)
the branch is analyzable. Indeed, the target was seeing only the
unconditional branch and not the faulting load op and thought it was
a simple unconditional block.
The machine verifier was complaining because of that and moreover,
other optimizations could have done wrong transformation!
In the process, simplify the representation of the handler block in
the faulting load op. Now, we directly reference the handler block
instead of using a label. This has the benefits of:
1. MC knows how to issue a label for a BB, so leave that to it.
2. Accessing the target BB from its label is painful, whereas it is
direct from a MBB operand.
Note: The 2 bytes offset in implicit-null-check.ll comes from the
fact the unconditional jumps are not removed anymore, as the whole
terminator sequence is not analyzable anymore.
Will fix it in a subsequence commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268327 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The `"patchable-function"` attribute can be used by an LLVM client to
influence LLVM's code generation in ways that makes the generated code
easily patchable at runtime (for instance, to redirect control).
Right now only one patchability scheme is supported,
`"prologue-short-redirect"`, but this can be expanded in the future.
Reviewers: joker.eph, rnk, echristo, dberris
Subscribers: joker.eph, echristo, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D19046
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266715 91177308-0d34-0410-b5e6-96231b3b80d8
This introduces a new flag that indicates that a specific instruction
will never be present when the MachineScheduler runs and therefore needs
no scheduling information.
This is in preparation for an upcoming commit which checks completeness
of a scheduling model when tablegen runs.
Differential Revision: http://reviews.llvm.org/D17728
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@262383 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This makes it possible to specify some operands as optional to the AsmMatcher.
Setting this field to true will prevent the AsmMatcher from emitting
'too few operands' errors when there are missing optional operands.
Reviewers: olista01, ab
Subscribers: nhaustov, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15755
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259913 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds a new attribute which targets can set in TableGen which causes a function to be generated which matches register alternative names. This is very similar to `ShouldEmitMatchRegisterName`, except it works on alt names.
This patch is currently used by the out of tree part of the AVR backend. It reduces code duplication greatly, and has the effect that you do not need to hardcode altname to register mappings in C++.
It will not work on targets which have registers which share the same aliases.
Reviewers: stoklund, arsenm, dsanders, hfinkel, vkalintiris
Subscribers: hfinkel, dylanmckay, llvm-commits
Differential Revision: http://reviews.llvm.org/D16312
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@259636 91177308-0d34-0410-b5e6-96231b3b80d8
The selection process being split into separate passes, we need generic opcodes
to translate the LLVM IR to target independent code.
This patch adds an opcode for addition: G_ADD.
Differential Revision: http://reviews.llvm.org/D15472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@258333 91177308-0d34-0410-b5e6-96231b3b80d8
This restores the previous behavior of not including the mnemonic in the classes table for every target that starts instruction lines with the mnemonic. Not only did the table size increase by 1 entry, but the class enum increased in size which caused every class in the array to increase in size. It also grew the size of the function that parsers tokens into classes by a substantial amount.
This adds a new HasMnemonicFirst flag to all AsmParsers. It's set to 1 by default and Hexagon target overrides it to 0.
For the X86 target alone this recovers 324KB of size on the llvm-mc executable.
I believe the current state is still a bad design choice for the Hexagon target as it causes most of the parsing to do a linear search through the entire match table to comparing operands against every instruction until it finds one that works. At least for the other targets we do a binary search based on mnemonic over which to do the linear scan.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256669 91177308-0d34-0410-b5e6-96231b3b80d8
For targets to add their own operand types as needed, as advertised in
Operand's comment, they need to be able to specify an alternate namespace
for OperandType names too. This matches the RegisterOperand class.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256299 91177308-0d34-0410-b5e6-96231b3b80d8
When FixedLenDecoder matches an input bitpattern of form [01]+ with an
instruction bitpattern of form [01?]+ (where 0/1 are static bits and ? are
mixed/variable bits) it passes the input bitpattern to a specific instruction
decoder method which then makes a final decision whether the bitpattern is a
valid instruction or not. This means the decoder must handle all possible
values of the variable bits which sometimes leads to opcode rewrites in the
decoder method when the instructions are not fully orthogonal.
The patch provides a way for the decoder method to say that when it returns
Fail it does not necessarily mean the bitpattern is invalid, but rather that
the bitpattern is definitely not an instruction that is recognized by the
decoder method. The decoder can then try to match the input bitpattern with
other possible instruction bitpatterns.
For example, this allows to solve a situation on AArch64 where the `MSR
(immediate)` instruction has form:
1101 0101 0000 0??? 0100 ???? ???1 1111
but not all values of the ? bits are allowed. The rejected values should be
handled by the `extended MSR (register)` instruction:
1101 0101 000? ???? ???? ???? ???? ????
The decoder will first try to decode an input bitpattern that matches both
bitpatterns as `MSR (immediate)` but currently this puts the decoder method of
`MSR (immediate)` into a situation when it must be able to decode all possible
values of the ? bits, i.e. it would need to rewrite the instruction to `MSR
(register)` when it is not `MSR (immediate)`.
The patch allows to specify that the decoder method cannot determine if the
instruction is valid for all variable values. The decoder method can simply
return Fail when it knows it is definitely not `MSR (immediate)`. The decoder
will then backtrack the decoding and find that it can match the input
bitpattern with the more generic `MSR (register)` bitpattern too.
Differential Revision: http://reviews.llvm.org/D7174
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@242274 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Initially, these intrinsics seemed like part of a family of "frame"
related intrinsics, but now I think that's more confusing than helpful.
Initially, the LangRef specified that this would create a new kind of
allocation that would be allocated at a fixed offset from the frame
pointer (EBP/RBP). We ended up dropping that design, and leaving the
stack frame layout alone.
These intrinsics are really about sharing local stack allocations, not
frame pointers. I intend to go further and add an `llvm.localaddress()`
intrinsic that returns whatever register (EBP, ESI, ESP, RBX) is being
used to address locals, which should not be confused with the frame
pointer.
Naming suggestions at this point are welcome, I'm happy to re-run sed.
Reviewers: majnemer, nicholas
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11011
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@241633 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This instruction encodes a loading operation that may fault, and a label
to branch to if the load page-faults. The locations of potentially
faulting loads and their "handler" destinations are recorded in a
FaultMap section, meant to be consumed by LLVM's clients.
Nothing generates FAULTING_LOAD_OP instructions yet, but they will be
used in a future change.
The documentation (FaultMaps.rst) needs improvement and I will update
this diff with a more expanded version shortly.
Depends on D10196
Reviewers: rnk, reames, AndyAyers, ab, atrick, pgavlin
Reviewed By: atrick, pgavlin
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10197
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239740 91177308-0d34-0410-b5e6-96231b3b80d8
If there is an InstAlias defined for an instruction that had a custom
converter (AsmMatchConverter), then when the alias is matched,
the custom converter will be used rather than the converter generated
by the InstAlias.
This patch adds the UseInstAsmMatchConverter field to the InstAlias
class, which allows you to override this behavior and force the
converter generated by the InstAlias to be used.
This is required for some future improvemnts to the R600 assembler.
Differential Revision: http://reviews.llvm.org/D9083
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@238210 91177308-0d34-0410-b5e6-96231b3b80d8
