Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313825 91177308-0d34-0410-b5e6-96231b3b80d8
Add support for passing SwiftError through a register on the Windows x64
calling convention. This allows the use of swifterror attributes on
parameters which is used by the swift front end for the `Error`
parameter. This partially enables building the swift standard library
for Windows x86_64.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313791 91177308-0d34-0410-b5e6-96231b3b80d8
After r313775, it's easier to maintain a parallel BitVector of spilled
locations indexed by location number.
I wasn't able to build a good reduced test case for this iteration of
the bug, but I added a more direct assertion that spilled values must
use frame index locations. If this bug reappears, it won't only fire on
the NEON vector code that we detected it on, but on medium-sized
integer-only programs as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313786 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The new code should be linear in the number of DBG_VALUEs, while the old
code was quadratic. NFC intended.
This is also hopefully a more direct expression of the problem, which is
to:
1. Rewrite all virtual register operands to stack slots or physical
registers
2. Uniquely number those machine operands, assigning them location
numbers
3. Rewrite all uses of the old location numbers in the interval map to
use the new location numbers
In r313400, I attempted to track which locations were spilled in a
parallel bitvector indexed by location number. My code was broken
because these location numbers are not stable during rewriting.
Reviewers: aprantl, hans
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D38068
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313775 91177308-0d34-0410-b5e6-96231b3b80d8
This version of the patch fixes an off-by-one error causing PR34596. We
do not need to use std::next(BlockIter) when calling updateDepths, as
BlockIter already points to the next element.
Original commit message:
> For large basic blocks with lots of combinable instructions, the
> MachineTraceMetrics computations in MachineCombiner can dominate the compile
> time, as computing the trace information is quadratic in the number of
> instructions in a BB and it's relevant successors/predecessors.
> In most cases, knowing the instruction depth should be enough to make
> combination decisions. As we already iterate over all instructions in a basic
> block, the instruction depth can be computed incrementally. This reduces the
> cost of machine-combine drastically in cases where lots of instructions
> are combined. The major drawback is that AFAIK, computing the critical path
> length cannot be done incrementally. Therefore we only compute
> instruction depths incrementally, for basic blocks with more
> instructions than inc_threshold. The -machine-combiner-inc-threshold
> option can be used to set the threshold and allows for easier
> experimenting and checking if using incremental updates for all basic
> blocks has any impact on the performance.
>
> Reviewers: sanjoy, Gerolf, MatzeB, efriedma, fhahn
>
> Reviewed By: fhahn
>
> Subscribers: kiranchandramohan, javed.absar, efriedma, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D36619
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313751 91177308-0d34-0410-b5e6-96231b3b80d8
This re-applies commit r313685, this time with the proper updates to
the test cases.
Original commit message:
Unreachable blocks in the machine instr representation are these
weird empty blocks with no successors.
The MIR printer used to not print empty lists of successors. However,
the MIR parser now treats non-printed list of successors as "please
guess it for me". As a result, the parser tries to guess the list of
successors and given the block is empty, just assumes it falls through
the next block (if any).
For instance, the following test case used to fail the verifier.
The MIR printer would print
entry
/ \
true (def) false (no list of successors)
|
split.true (use)
The MIR parser would understand this:
entry
/ \
true (def) false
| / <-- invalid edge
split.true (use)
Because of the invalid edge, we get the "def does not
dominate all uses" error.
The fix consists in printing empty successor lists, so that the parser
knows what to do for unreachable blocks.
rdar://problem/34022159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313696 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r313685.
I thought I had ran ninja check, but apparently I didn't...
Need to update a bunch of mir tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313686 91177308-0d34-0410-b5e6-96231b3b80d8
Unreachable blocks in the machine instr representation are these
weird empty blocks with no successors.
The MIR printer used to not print empty lists of successors. However,
the MIR parser now treats non-printed list of successors as "please
guess it for me". As a result, the parser tries to guess the list of
successors and given the block is empty, just assumes it falls through
the next block (if any).
For instance, the following test case used to fail the verifier.
The MIR printer would print
entry
/ \
true (def) false (no list of successors)
|
split.true (use)
The MIR parser would understand this:
entry
/ \
true (def) false
| / <-- invalid edge
split.true (use)
Because of the invalid edge, we get the "def does not
dominate all uses" error.
The fix consists in printing empty successor lists, so that the parser
knows what to do for unreachable blocks.
rdar://problem/34022159
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313685 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313640, originally r313400, one more time for essentially
the same issue. My BitVector of spilled location numbers isn't working
because we coalesce identical DBG_VALUE locations as we rewrite them,
invalidating the location numbers used to index the BitVector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313679 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313431 and brings back r313374 with a fix to write
checksums as binary data and not ASCII hex strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313657 91177308-0d34-0410-b5e6-96231b3b80d8
I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313640 91177308-0d34-0410-b5e6-96231b3b80d8
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313589 91177308-0d34-0410-b5e6-96231b3b80d8
If we have an AssertZext of a truncated value that has already been AssertZext'ed,
we can assert on the wider source op to improve the zext-y knowledge:
assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
This moves a fold from being Mips-specific to general combining, and x86 shows
improvements.
Differential Revision: https://reviews.llvm.org/D37017
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313577 91177308-0d34-0410-b5e6-96231b3b80d8
rL310710 allowed store merging to occur after legalization to catch stores that are created late,
but this exposes a logic hole seen in PR34217:
https://bugs.llvm.org/show_bug.cgi?id=34217
We will miss merging stores if the target lowers vector extracts into target-specific operations.
This patch allows store merging to occur both before and after legalization if the target chooses
to get maximum merging.
I don't think the potential regressions in the other tests are relevant. The tests are for
correctness of weird IR constructs rather than perf tests, and I think those are still correct.
Differential Revision: https://reviews.llvm.org/D37987
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313564 91177308-0d34-0410-b5e6-96231b3b80d8
r313390 taught 'allowExtraAnalysis' to check whether remarks are
enabled at all. Use that to only do the expensive instruction printing
if they are.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313552 91177308-0d34-0410-b5e6-96231b3b80d8
For cases where we are BITCASTing to vectors of smaller elements, then if the entire source was a splatted sign (src's NumSignBits == SrcBitWidth) we can say that the dst's NumSignBit == DstBitWidth, as we're just splitting those sign bits across multiple elements.
We could generalize this but at the moment the only use case I have is to peek through bitcasts to vector comparison results.
Differential Revision: https://reviews.llvm.org/D37849
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313543 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313431 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313400 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313399 91177308-0d34-0410-b5e6-96231b3b80d8
Previously the 'Padding' argument was the number of padding
bytes to add. However most callers that use 'Padding' know
how many overall bytes they need to write. With the previous
code this would mean encoding the LEB once to find out how
many bytes it would occupy and then using this to calulate
the 'Padding' value.
See: https://reviews.llvm.org/D36595
Differential Revision: https://reviews.llvm.org/D37494
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313393 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR34629: asserts firing when building Chromium. It also broke some
buildbots building test-suite as reported on the commit thread.
> Summary:
> 1/ Operand folding during complex pattern matching for LEAs has been
> extended, such that it promotes Scale to accommodate similar operand
> appearing in the DAG.
> e.g.
> T1 = A + B
> T2 = T1 + 10
> T3 = T2 + A
> For above DAG rooted at T3, X86AddressMode will no look like
> Base = B , Index = A , Scale = 2 , Disp = 10
>
> 2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs
> so that if there is an opportunity then complex LEAs (having 3 operands)
> could be factored out.
> e.g.
> leal 1(%rax,%rcx,1), %rdx
> leal 1(%rax,%rcx,2), %rcx
> will be factored as following
> leal 1(%rax,%rcx,1), %rdx
> leal (%rdx,%rcx) , %edx
>
> 3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops,
> thus avoiding creation of any complex LEAs within a loop.
>
> Reviewers: lsaba, RKSimon, craig.topper, qcolombet
>
> Reviewed By: lsaba
>
> Subscribers: spatel, igorb, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D35014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313376 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
1/ Operand folding during complex pattern matching for LEAs has been
extended, such that it promotes Scale to accommodate similar operand
appearing in the DAG.
e.g.
T1 = A + B
T2 = T1 + 10
T3 = T2 + A
For above DAG rooted at T3, X86AddressMode will no look like
Base = B , Index = A , Scale = 2 , Disp = 10
2/ During OptimizeLEAPass down the pipeline factorization is now performed over LEAs
so that if there is an opportunity then complex LEAs (having 3 operands)
could be factored out.
e.g.
leal 1(%rax,%rcx,1), %rdx
leal 1(%rax,%rcx,2), %rcx
will be factored as following
leal 1(%rax,%rcx,1), %rdx
leal (%rdx,%rcx) , %edx
3/ Aggressive operand folding for AM based selection for LEAs is sensitive to loops,
thus avoiding creation of any complex LEAs within a loop.
Reviewers: lsaba, RKSimon, craig.topper, qcolombet
Reviewed By: lsaba
Subscribers: spatel, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D35014
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313343 91177308-0d34-0410-b5e6-96231b3b80d8
These are removed in C++17. We still have some users of
unary_function::argument_type, so just spell that typedef out. No
functionality change intended.
Note that many of the argument types are actually wrong :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313287 91177308-0d34-0410-b5e6-96231b3b80d8
This replaces TableGen's type inference to operate on parameterized
types instead of MVTs, and as a consequence, some interfaces have
changed:
- Uses of MVTs are replaced by ValueTypeByHwMode.
- EEVT::TypeSet is replaced by TypeSetByHwMode.
This affects the way that types and type sets are printed, and the
tests relying on that have been updated.
There are certain users of the inferred types outside of TableGen
itself, namely FastISel and GlobalISel. For those users, the way
that the types are accessed have changed. For typical scenarios,
these replacements can be used:
- TreePatternNode::getType(ResNo) -> getSimpleType(ResNo)
- TreePatternNode::hasTypeSet(ResNo) -> hasConcreteType(ResNo)
- TypeSet::isConcrete -> TypeSetByHwMode::isValueTypeByHwMode(false)
For more information, please refer to the review page.
Differential Revision: https://reviews.llvm.org/D31951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313271 91177308-0d34-0410-b5e6-96231b3b80d8
Use RotAmt.urem(VTBits) instead of AND(RotAmt, VTBits - 1)
TBH I don't expect non-power-of-2 types to be created, but it makes the logic clearer and matches what we do in other rotation combines.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313245 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
XRay had been assuming that the previous section is the "text" section
of the function when lowering the instrumentation map. Unfortunately
this is not a safe assumption, because we may be coming from lowering
debug type information for the function being lowered.
This fixes an issue with combining -gsplit-dwarf, -generate-type-units,
-debug-compile and -fxray-instrument for sole member functions. When the
split dwarf section is stripped, we're left with references from the
xray_instr_map to the debug section. The change now uses the function's
symbol instead of the previous section's start symbol.
We found the bug while attempting to strip the split debug sections off
an XRay-instrumented object file, which had a peculiar edge-case for
single-function classes where the single function is being lowered.
Because XRay had assocaited the instrumentation map for a function to
the debug types section instead of the function's section, the objcopy
call will fail due to the misplaced reference from the xray_instr_map
section.
Reviewers: pcc, dblaikie, echristo
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D37791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313233 91177308-0d34-0410-b5e6-96231b3b80d8
This caused PR34596.
> [MachineCombiner] Update instruction depths incrementally for large BBs.
>
> Summary:
> For large basic blocks with lots of combinable instructions, the
> MachineTraceMetrics computations in MachineCombiner can dominate the compile
> time, as computing the trace information is quadratic in the number of
> instructions in a BB and it's relevant successors/predecessors.
>
> In most cases, knowing the instruction depth should be enough to make
> combination decisions. As we already iterate over all instructions in a basic
> block, the instruction depth can be computed incrementally. This reduces the
> cost of machine-combine drastically in cases where lots of instructions
> are combined. The major drawback is that AFAIK, computing the critical path
> length cannot be done incrementally. Therefore we only compute
> instruction depths incrementally, for basic blocks with more
> instructions than inc_threshold. The -machine-combiner-inc-threshold
> option can be used to set the threshold and allows for easier
> experimenting and checking if using incremental updates for all basic
> blocks has any impact on the performance.
>
> Reviewers: sanjoy, Gerolf, MatzeB, efriedma, fhahn
>
> Reviewed By: fhahn
>
> Subscribers: kiranchandramohan, javed.absar, efriedma, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D36619
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313213 91177308-0d34-0410-b5e6-96231b3b80d8
MachineScheduler when clustering loads or stores checks if base
pointers point to the same memory. This check is done through
comparison of base registers of two memory instructions. This
works fine when instructions have separate offset operand. If
they require a full calculated pointer such instructions can
never be clustered according to such logic.
Changed shouldClusterMemOps to accept base registers as well and
let it decide what to do about it.
Differential Revision: https://reviews.llvm.org/D37698
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313208 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a size of '1' for VLAs because we weren't sure what
MSVC did. However, MSVC does support declaring an array without a size,
for which it emits an array type with a size of zero. Clang emits the
same DI metadata for VLAs and arrays without bound, so we would describe
arrays without bound as having one element. This lead to Microsoft
debuggers only printing a single element.
Emitting a size of zero appears to cause these debuggers to search the
symbol information to find a definition of the variable with accurate
array bounds.
Fixes http://crbug.com/763580
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313203 91177308-0d34-0410-b5e6-96231b3b80d8
This is to fix PR34502. After rL311401, the live range of spilled vreg will be
cleared. HoistSpill need to use the live range of the original vreg before splitting
to know the moving range of the spills. The patch saves a copy of live interval for
the spilled vreg inside of HoistSpillHelper.
Differential Revision: https://reviews.llvm.org/D37578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313197 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To improve CodeView quality for static member functions, we need to make the
static explicit. In addition to a small change in LLVM's CodeViewDebug to
return the appropriate MethodKind, this requires a small change in Clang to
note the staticness in the debug info metadata.
Subscribers: aprantl, hiraditya
Differential Revision: https://reviews.llvm.org/D37715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313192 91177308-0d34-0410-b5e6-96231b3b80d8
Implementing this pass as a PowerPC specific pass. Branch coalescing utilizes
the analyzeBranch method which currently does not include any implicit operands.
This is not an issue on PPC but must be handled on other targets.
Pass is currently off by default. Enabled via -enable-ppc-branch-coalesce.
Differential Revision : https: // reviews.llvm.org/D32776
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313061 91177308-0d34-0410-b5e6-96231b3b80d8
