When symbolizing large binaries, parsing every CU in a DWP file is a
significant performance penalty. Instead, use the index to only load the
CUs that are needed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313659 91177308-0d34-0410-b5e6-96231b3b80d8
This speeds up dumping specific DIEs by not parsing abbreviations for
units that are not used.
(this is also handy to have in eventually to speed up llvm-symbolizer
for .dwp files, where parsing most of the DWP file can be avoided by
using the index)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313635 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313530 91177308-0d34-0410-b5e6-96231b3b80d8
This is the first of many commits that enable selectively dumping just
one record from the debug info.
This reapplies r313412 with some extra qualification to appease GCC and MSVC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313419 91177308-0d34-0410-b5e6-96231b3b80d8
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313255 91177308-0d34-0410-b5e6-96231b3b80d8
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313250 91177308-0d34-0410-b5e6-96231b3b80d8
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313207 91177308-0d34-0410-b5e6-96231b3b80d8
This is a feature supported by Darwin dwarfdump. UUIDs are used to
associate executables with their .dSYM bundles.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313165 91177308-0d34-0410-b5e6-96231b3b80d8
This patches renames "brief" to "verbose" in de DIDumpOptions and
inverts the logic to match the new behavior where brief is the default.
Changing the default value uncovered some bugs related to the
DIDumpOptions not being propagated and have been fixed as well.
Differential revision: https://reviews.llvm.org/D37745
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313139 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312970 91177308-0d34-0410-b5e6-96231b3b80d8
It is possible for two modules to have the same name if they are
archive members with the same name, or if we are doing LTO (in which
case all modules will have the name "lto.tmp").
Differential Revision: https://reviews.llvm.org/D37589
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312744 91177308-0d34-0410-b5e6-96231b3b80d8
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312358 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312276 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312042 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds printing for DW_AT_type DIEs like it's currently already
the case for DW_AT_specification DIEs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311492 91177308-0d34-0410-b5e6-96231b3b80d8
We were using a std::vector<> and resizing to MaxRecordLength,
which is ~64KB. We would then do this repeatedly often many
times in a tight loop, which was causing measurable performance
impact when linking PDBs.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36940
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311375 91177308-0d34-0410-b5e6-96231b3b80d8
computeAddrMap function calls std::stable_sort with a comparison
function that computes deserialized symbols every time its called.
In the result deserializeAs<PublicSym32> is called 20-30 times per
symbol. It's much faster to calculate it beforehand and pass a
pointer to it to the comparison function.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36941
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311373 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for dumping a summary of module symbols
and CodeView debug chunks. This option prints a table for
each module of all of the symbols that occurred in the module
and the number of times it occurred and total byte size. Then
at the end it prints the totals for the entire file.
Additionally, this patch adds the -jmc (just my code) option,
which suppresses modules which are from external libraries or
linker imports, so that you can focus only on the object files
and libraries that originate from your own source code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311338 91177308-0d34-0410-b5e6-96231b3b80d8
When dumping, we were treating the S_INLINESITESYM as referring
to a type record, when it actually refers to an id record. We
had this correct in TypeIndexDiscovery, so our merging algorithm
should be fine, but we had it wrong in the dumper, which means it
would appear to work most of the time, unless the index was out
of bounds in the type stream, when it would fail. Fixed this, and
audited a few other cases to make them match the behavior in
TypeIndexDiscovery.
Also, I've now observed a new symbol record with kind 0x1168 which
I have no clue what it is, so to avoid crashing we have to just
print "Unknown Symbol Kind".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311117 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we were writing an empty globals stream. Windows
tools interpret this as "private symbols are not present in
this PDB", even when they are, so we need to fix this. Regardless,
without it we don't have information about global variables, so
we need to fix it anyway. This patch does that.
With this patch, the "lm" command in WinDbg correctly reports
that we have private symbols available, but the "dv" command
still refuses to display local variables.
Differential Revision: https://reviews.llvm.org/D36535
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310743 91177308-0d34-0410-b5e6-96231b3b80d8
In the refactor to merge the publics and globals stream, a bug
was introduced that wrote the wrong value for one of the fields
of the PublicsStreamHeader. This caused debugging in WinDbg
to break.
We had no way of dumping any of these fields, so in addition to
fixing the bug I've added dumping support for them along with a
test that verifies the correct value is written.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310439 91177308-0d34-0410-b5e6-96231b3b80d8
The publics stream and globals stream are very similar. They both
contain a list of hash buckets that refer into a single shared stream,
the symbol record stream. Because of the need for each builder to manage
both an independent hash stream as well as a single shared record
stream, making the two builders be independent entities is not the right
design. This patch merges them into a single class, of which only a
single instance is needed to create all 3 streams. PublicsStreamBuilder
and GlobalsStreamBuilder are now merged into the single GSIStreamBuilder
class, which writes all 3 streams at once.
Note that this patch does not contain any functionality change. So we're
still not yet writing any records to the globals stream. All we're doing
is making it so that when we do start writing records to the globals,
this refactor won't have to be part of that patch.
Differential Revision: https://reviews.llvm.org/D36489
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310438 91177308-0d34-0410-b5e6-96231b3b80d8
The compiler outputs PROC32_ID symbols into the object files
for functions, and these symbols have an embedded type index
which, when copied to the PDB, refer to the IPI stream. However,
the symbols themselves are also converted into regular symbols
(e.g. S_GPROC32_ID -> S_GPROC32), and type indices in the regular
symbol records refer to the TPI stream. So this patch applies
two fixes to function records.
1. It converts ID symbols to the proper non-ID record type.
2. After remapping the type index from the object file's index
space to the PDB file/IPI stream's index space, it then
remaps that index to the TPI stream's index space by.
Besides functions, during the remapping process we were also
discarding symbol record types which we did not recognize.
In particular, we were discarding S_BPREL32 records, which is
what MSVC uses to describe local variables on the stack. So
this patch fixes that as well by copying them to the PDB.
Differential Revision: https://reviews.llvm.org/D36426
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310394 91177308-0d34-0410-b5e6-96231b3b80d8
