If we have an AssertZext of a truncated value that has already been AssertZext'ed,
we can assert on the wider source op to improve the zext-y knowledge:
assert (trunc (assert X, i8) to iN), i1 --> trunc (assert X, i1) to iN
This moves a fold from being Mips-specific to general combining, and x86 shows
improvements.
Differential Revision: https://reviews.llvm.org/D37017
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313577 91177308-0d34-0410-b5e6-96231b3b80d8
The other members of the dext family of instructions (dextm, dextu) are
traditionally handled by the assembler selecting the right variant of
'dext' depending on the values of the position and size operands.
When these instructions are disassembled, rather than reporting the
actual instruction, an equivalent aliased form of 'dext' is generated
and is reported. This is to mimic the behaviour of binutils.
Reviewers: slthakur, nitesh.jain, atanasyan
Differential Revision: https://reviews.llvm.org/D34887
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313276 91177308-0d34-0410-b5e6-96231b3b80d8
Traditionally GAS has provided automatic selection between dins, dinsm and
dinsu. Binutils also disassembles all instructions in that family as 'dins'
rather than the actual instruction.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34877
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313267 91177308-0d34-0410-b5e6-96231b3b80d8
This patch complements D16810 "[mips] Make isel select the correct DEXT variant
up front.". Now ISel picks the right variant of DINS, so now there is no need
to replace DINS with the appropriate variant during
MipsMCCodeEmitter::encodeInstruction().
This patch also enables target specific instruction verification for ins, dins,
dinsm, dinsu, ext, dext, dextm, dextu. These instructions have constraints that
are checked when generating MipsISD::Ins and MipsISD::Ext nodes, but these
constraints are not checked during instruction selection. Adding machine
verification should catch outstanding cases.
Finally, correct a bug that instruction verification uncovered, where the
position operand of a DINSU generated during lowering was being silently
and accidently corrected to the correct value.
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D34809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313254 91177308-0d34-0410-b5e6-96231b3b80d8
This patch corrects the definition of the DINSM instruction.
Specification for DINSM instruction for Mips64 says that size operand should
be 2 <= size <= 64, but it is defined as uimm5_inssize_plus1 which gives
range of 1 .. 32.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313149 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, UImm16_AltRelaxed match type is not handled in
MatchAndEmitInstruction() function, which may result in
llvm_unreachable() behavior.
This patch adds necessary case for this match type.
Patch by Aleksandar Beserminji.
Differential Revision: https://reviews.llvm.org/D37682
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313077 91177308-0d34-0410-b5e6-96231b3b80d8
This change converts the `MipsAsmBackend` constructor to the "standard"
form. It makes possible to use `RegisterMCAsmBackend` for the backends
registrations. Now we pass `Triple` instance to the `MipsAsmBackend`
ctor and deduce all required options like endianness and bitness from
the triple. We still need to implement explicit ABI checking for
providing correct options to backends.
Differential revision: https://reviews.llvm.org/D37519
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312720 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables generation of NMADD and NMSUB instructions when fneg node
is present. These instructions are currently only generated if fsub node is
present.
Patch by Stanislav Ocovaj.
Differential Revision: https://reviews.llvm.org/D34507
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311862 91177308-0d34-0410-b5e6-96231b3b80d8
If a variable has an explicit section such as .sdata or .sbss, it is placed
in that section and accessed in a gp relative manner. This overrides the global
-G setting.
Otherwise if a variable has a explicit section attached to it, such as '.rodata'
or '.mysection', it is not placed in the small data section. This also overrides
the global -G setting.
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D36616
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311001 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is modeled on the implementation for x86 which stores the command line
option in a 'StackAlignOverride' field in MipsSubtarget and then uses this
to compute a 'stackAlignment' value in
MipsSubtarget::initializeSubtargetDependencies.
The stackAlignment() method in MipsSubTarget is renamed to getStackAlignment()
and returns the computed 'stackAlignment'.
Reviewers: sdardis
Reviewed By: sdardis
Subscribers: llvm-commits, arichardson
Differential Revision: https://reviews.llvm.org/D35874
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310891 91177308-0d34-0410-b5e6-96231b3b80d8
This adjusts the tests to hopfully pacify the llvm-clang-x86_64-expensive-checks-win
buildbot.
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310834 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The stack alignment depends on the ABI (16 bytes for N32 and N64 and 8
bytes for O32), not the CPU type.
Reviewers: sdardis
Reviewed By: sdardis
Subscribers: atanasyan, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D36326
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310768 91177308-0d34-0410-b5e6-96231b3b80d8
Post commit review of rL308619 highlighted the need for handling N64
with -fno-pic. Testing reveale a stale assert when generating a GP
relative addressing mode.
This patch removes that assert and adds the necessary patterns for
MIPS64 to perform gp relative addressing with -fno-pic
(and the implicit -mno-abicalls + -mgpopt).
Reviewers: atanasyan, nitesh.jain
Differential Revision: https://reviews.llvm.org/D36472
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310713 91177308-0d34-0410-b5e6-96231b3b80d8
The liveness-tracking code assumes that the registers that were saved
in the function's prolog are live outside of the function. Specifically,
that registers that were saved are also live-on-exit from the function.
This isn't always the case as illustrated by the LR register on ARM.
Differential Revision: https://reviews.llvm.org/D36160
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310619 91177308-0d34-0410-b5e6-96231b3b80d8
Assert that a binary expression is actually a binary expression,
rather than potientially incorrectly attempting to handle it as a
unary expression.
This resolves PR34083.
Thanks to Simonn Pilgrim for reporting the issue!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310460 91177308-0d34-0410-b5e6-96231b3b80d8
Author: milena.vujosevic.janicic
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Usage of u_int64_t replaced by uint64_t to avoid issues because of which previous patch version was reverted:
Differential Revision: https://reviews.llvm.org/D34511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310044 91177308-0d34-0410-b5e6-96231b3b80d8
IMHO it is an antipattern to have a enum value that is Default.
At any given piece of code it is not clear if we have to handle
Default or if has already been mapped to a concrete value. In this
case in particular, only the target can do the mapping and it is nice
to make sure it is always done.
This deletes the two default enum values of CodeModel and uses an
explicit Optional<CodeModel> when it is possible that it is
unspecified.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309911 91177308-0d34-0410-b5e6-96231b3b80d8
Changing mask argument type from const SmallVectorImpl<int>& to
ArrayRef<int>.
This came up in D35700 where a mask is received as an ArrayRef<int> and
we want to pass it to TargetLowering::isShuffleMaskLegal().
Also saves a few lines of code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309085 91177308-0d34-0410-b5e6-96231b3b80d8
-membedded-data changes the location of constant data from the .sdata to
the .rodata section. Previously it was (incorrectly) always located in the
.rodata section.
Reviewers: atanasyan
Differential Revision: https://reviews.llvm.org/D35686
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308758 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes LSR generate better code for SystemZ in the cases of memory
intrinsics, Load->Store pairs or comparison of immediate with memory.
In order to achieve this, the following common code changes were made:
* New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if
LSR should do instruction-based addressing evaluations by calling
isLegalAddressingMode() with the Instruction pointers.
* In LoopStrengthReduce: handle address operands of memset, memmove and memcpy
as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address,
not just loads or stores.
SystemZ changes:
* isLSRCostLess() implemented with Insns first, and without ImmCost.
* New function supportedAddressingMode() that is a helper for TTI methods
looking at Instructions passed via pointers.
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D35262https://reviews.llvm.org/D35049
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308729 91177308-0d34-0410-b5e6-96231b3b80d8
Builder clang-x86_64-linux-abi-test apparently failed due
to a spurious error unrelated to the changes r308585
introduced.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308612 91177308-0d34-0410-b5e6-96231b3b80d8
Introduced FSELECT node necesary when lowering ISD::SELECT
which has i32, f64, f64 as its operands.
SEL_D instruction required that its output and first operand
of a SELECT node, which it used, have matching types.
MTC1_D64 node introduced to aid FSELECT lowering.
This fixes machine verifier errors on following tests:
CodeGen/Mips/llvm-ir/select-dbl.ll
CodeGen/Mips/llvm-ir/select-flt.ll
CodeGen/Mips/select.ll
Differential Revision: https://reviews.llvm.org/D35408
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308595 91177308-0d34-0410-b5e6-96231b3b80d8
This change introduces additional machine instructions in functions
dealing with the expansion of msa pseudo f16 instructions due to
register classes being inappropriate when checked with machine
verifier.
Differential Revision: https://reviews.llvm.org/D34276
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308301 91177308-0d34-0410-b5e6-96231b3b80d8
If the `long-calls` feature flags is enabled, disable use of the `jal`
instruction. Instead of that call a function by by first loading its
address into a register, and then using the contents of that register.
Differential revision: https://reviews.llvm.org/D35168
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308087 91177308-0d34-0410-b5e6-96231b3b80d8
FileCheck is crashing on in the input file, so reverting again while
I investigate.
This reverts r308023.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308030 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
The last version of this patch broke one of the expensive checks buildbots,
this version changes the failing test/MC/Mips/mt/invalid.s and other invalid
tests to write the errors to a file and run FileCheck on that, rather than
relying on the 'not llvm-mc ... <%s 2>&1 | Filecheck %s' idiom.
Hopefully this will sarisfy the buildbot.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308023 91177308-0d34-0410-b5e6-96231b3b80d8
Author: milena.vujosevic.janicic
Reviewers: sdardis
The patch extends size reduction pass for MicroMIPS.
The following instructions are examined and transformed, if possible:
ADDIU instruction is transformed into 16-bit instruction ADDIUSP
ADDIU instruction is transformed into 16-bit instruction ADDIUR1SP
Function InRange is changed to avoid left shifting of negative values, since
that caused some sanitizer tests to fail (so the previous patch
Differential Revision: https://reviews.llvm.org/D34511
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308011 91177308-0d34-0410-b5e6-96231b3b80d8
For multiprecision arithmetic on MIPS, rather than using ISD::ADDE / ISD::ADDC,
get SelectionDAG to break down the operation into ISD::ADDs and ISD::SETCCs.
For MIPS, only the DSP ASE has a carry flag, so in the general case it is not
useful to directly support ISD::{ADDE, ADDC, SUBE, SUBC} nodes.
Also improve the generation code in such cases for targets with
TargetLoweringBase::ZeroOrOneBooleanContent by directly using the result of the
comparison node rather than using it in selects. Similarly for ISD::SUBE /
ISD::SUBC.
Address optimization breakage by moving the generation of MIPS specific integer
multiply-accumulate nodes to before legalization.
This revolves PR32713 and PR33424.
Thanks to Simonas Kazlauskas and Pirama Arumuga Nainar for reporting the issue!
Reviewers: slthakur
Differential Revision: https://reviews.llvm.org/D33494
The previous version of this patch was too aggressive in producing fused
integer multiple-addition instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307906 91177308-0d34-0410-b5e6-96231b3b80d8
Unlike many other instructions, these instructions have aliases which
take coprocessor registers, gpr register, accumulator (and dsp accumulator)
registers, floating point registers, floating point control registers and
coprocessor 2 data and control operands.
For the moment, these aliases are treated as pseudo instructions which are
expanded into the underlying instruction. As a result, disassembling these
instructions shows the underlying instruction and not the alias.
Reviewers: slthakur, atanasyan
Differential Revision: https://reviews.llvm.org/D35253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307836 91177308-0d34-0410-b5e6-96231b3b80d8
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307730 91177308-0d34-0410-b5e6-96231b3b80d8
