Summary:
This implements the design discussed on llvm-dev for better tracking of
variables that live in memory through optimizations:
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117222.html
This is tracked as PR34136
llvm.dbg.addr is intended to be produced and used in almost precisely
the same way as llvm.dbg.declare is today, with the exception that it is
control-dependent. That means that dbg.addr should always have a
position in the instruction stream, and it will allow passes that
optimize memory operations on local variables to insert llvm.dbg.value
calls to reflect deleted stores. See SourceLevelDebugging.rst for more
details.
The main drawback to generating DBG_VALUE machine instrs is that they
usually cause LLVM to emit a location list for DW_AT_location. The next
step will be to teach DwarfDebug.cpp how to recognize more DBG_VALUE
ranges as not needing a location list, and possibly start setting
DW_AT_start_offset for variables whose lifetimes begin mid-scope.
Reviewers: aprantl, dblaikie, probinson
Subscribers: eraman, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37768
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313825 91177308-0d34-0410-b5e6-96231b3b80d8
After r313775, it's easier to maintain a parallel BitVector of spilled
locations indexed by location number.
I wasn't able to build a good reduced test case for this iteration of
the bug, but I added a more direct assertion that spilled values must
use frame index locations. If this bug reappears, it won't only fire on
the NEON vector code that we detected it on, but on medium-sized
integer-only programs as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313786 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313640, originally r313400, one more time for essentially
the same issue. My BitVector of spilled location numbers isn't working
because we coalesce identical DBG_VALUE locations as we rewrite them,
invalidating the location numbers used to index the BitVector.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313679 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts r313431 and brings back r313374 with a fix to write
checksums as binary data and not ASCII hex strings.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313657 91177308-0d34-0410-b5e6-96231b3b80d8
I forgot to zero out the BitVector when reusing it between UserValues.
Later uses of the same location number for a different UserValue would
falsely indicate that they were spilled. Usually this would lead to
incorrect debug info, but in some cases they would indicate something
nonsensical like a memory location based on a vector register (Q8 on
ARM).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313640 91177308-0d34-0410-b5e6-96231b3b80d8
This caused asserts in Chromium. See http://crbug.com/766261
> Summary:
> This comes up in optimized debug info for C++ programs that pass and
> return objects indirectly by address. In these programs,
> llvm.dbg.declare survives optimization, which causes us to emit indirect
> DBG_VALUE instructions. The fast register allocator knows to insert
> DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
> LiveDebugVariables did not until this change.
>
> This fixes part of PR34513. I need to look into why this doesn't work at
> -O0 and I'll send follow up patches to handle that.
>
> Reviewers: aprantl, dblaikie, probinson
>
> Subscribers: qcolombet, hiraditya, llvm-commits
>
> Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313589 91177308-0d34-0410-b5e6-96231b3b80d8
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313530 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 6389e7aa724ea7671d096f4770f016c3d86b0d54.
There is a bug in this implementation where the string value of the
checksum is outputted, instead of the actual hex bytes. Therefore the
checksum is incorrect, and this prevent pdbs from being loaded by visual
studio. Revert this until the checksum is emitted correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313431 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This comes up in optimized debug info for C++ programs that pass and
return objects indirectly by address. In these programs,
llvm.dbg.declare survives optimization, which causes us to emit indirect
DBG_VALUE instructions. The fast register allocator knows to insert
DW_OP_deref when spilling indirect DBG_VALUE instructions, but the
LiveDebugVariables did not until this change.
This fixes part of PR34513. I need to look into why this doesn't work at
-O0 and I'll send follow up patches to handle that.
Reviewers: aprantl, dblaikie, probinson
Subscribers: qcolombet, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D37911
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313400 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Fixes PR34513.
Indirect DBG_VALUEs typically come from dbg.declares of non-trivially
copyable C++ objects that must be passed by address. We were already
handling the case where the virtual register gets allocated to a
physical register and is later spilled. That's what usually happens for
normal parameters that aren't NRVO variables: they usually appear in
physical register parameters, and are spilled later in the function,
which would correctly add deref.
NRVO variables are different because the dbg.declare can come much later
after earlier instructions cause the incoming virtual register to be
spilled.
Also, clean up this code. We only need to look at the first operand of a
DBG_VALUE, which eliminates the operand loop.
Reviewers: aprantl, dblaikie, probinson
Subscribers: MatzeB, qcolombet, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D37929
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313399 91177308-0d34-0410-b5e6-96231b3b80d8
This breaks bootstrap builds, and is actually unnecessary. Tested
locally and it seems we can remove -debug-comile just fine.
Follow-up to D37791.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313238 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
XRay had been assuming that the previous section is the "text" section
of the function when lowering the instrumentation map. Unfortunately
this is not a safe assumption, because we may be coming from lowering
debug type information for the function being lowered.
This fixes an issue with combining -gsplit-dwarf, -generate-type-units,
-debug-compile and -fxray-instrument for sole member functions. When the
split dwarf section is stripped, we're left with references from the
xray_instr_map to the debug section. The change now uses the function's
symbol instead of the previous section's start symbol.
We found the bug while attempting to strip the split debug sections off
an XRay-instrumented object file, which had a peculiar edge-case for
single-function classes where the single function is being lowered.
Because XRay had assocaited the instrumentation map for a function to
the debug types section instead of the function's section, the objcopy
call will fail due to the misplaced reference from the xray_instr_map
section.
Reviewers: pcc, dblaikie, echristo
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D37791
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313233 91177308-0d34-0410-b5e6-96231b3b80d8
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313207 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we used a size of '1' for VLAs because we weren't sure what
MSVC did. However, MSVC does support declaring an array without a size,
for which it emits an array type with a size of zero. Clang emits the
same DI metadata for VLAs and arrays without bound, so we would describe
arrays without bound as having one element. This lead to Microsoft
debuggers only printing a single element.
Emitting a size of zero appears to cause these debuggers to search the
symbol information to find a definition of the variable with accurate
array bounds.
Fixes http://crbug.com/763580
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313203 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To improve CodeView quality for static member functions, we need to make the
static explicit. In addition to a small change in LLVM's CodeViewDebug to
return the appropriate MethodKind, this requires a small change in Clang to
note the staticness in the debug info metadata.
Subscribers: aprantl, hiraditya
Differential Revision: https://reviews.llvm.org/D37715
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313192 91177308-0d34-0410-b5e6-96231b3b80d8
A prologue-end line record is emitted with an incorrect associated address,
which causes a debugger to show the beginning of function body to be inside
the prologue.
Patch written by Carlos Alberto Enciso.
Differential Revision: https://reviews.llvm.org/D37625
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@313047 91177308-0d34-0410-b5e6-96231b3b80d8
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312970 91177308-0d34-0410-b5e6-96231b3b80d8
by reusing more of the existing machinery
This is a follow-up to r312169.
Thanks to Björn Pettersson for the testcase!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312773 91177308-0d34-0410-b5e6-96231b3b80d8
S_UDT records are basically the "bridge" between the debugger's
expression evaluator and the type information. If you type
(Foo*)nullptr into the watch window, the debugger looks for an
S_UDT record named Foo. If it can find one, it displays your type.
Otherwise you get an error.
We have always understood this to mean that if you have code like
this:
struct A {
int X;
};
struct B {
typedef A AT;
AT Member;
};
that you will get 3 S_UDT records. "A", "B", and "B::AT". Because
if you were to type (B::AT*)nullptr into the debugger, it would
need to find an S_UDT record named "B::AT".
But "B::AT" is actually the S_UDT record that would be generated
if B were a namespace, not a struct. So the debugger needs to be
able to distinguish this case. So what it does is:
1. Look for an S_UDT named "B::AT". If it finds one, it knows
that AT is in a namespace.
2. If it doesn't find one, split at the scope resolution operator,
and look for an S_UDT named B. If it finds one, look up the type
for B, and then look for AT as one of its members.
With this algorithm, S_UDT records for nested typedefs are not just
unnecessary, but actually wrong!
The results of implementing this in clang are dramatic. It cuts
our /DEBUG:FASTLINK PDB sizes by more than 50%, and we go from
being ~20% larger than MSVC PDBs on average, to ~40% smaller.
It also slightly speeds up link time. We get about 10% faster
links than without this patch.
Differential Revision: https://reviews.llvm.org/D37410
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312583 91177308-0d34-0410-b5e6-96231b3b80d8
Debug information can be, and was, corrupted when the runtime
remainder loop was fully unrolled. This is because a !null node can
be created instead of a unique one describing the loop. In this case,
the original node gets incorrectly updated with the NewLoopID
metadata.
In the case when the remainder loop is going to be quickly fully
unrolled, there isn't the need to add loop metadata for it anyway.
Differential Revision: https://reviews.llvm.org/D37338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312471 91177308-0d34-0410-b5e6-96231b3b80d8
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312358 91177308-0d34-0410-b5e6-96231b3b80d8
Issues addressed since original review:
- Moved removal of dead instructions found by
LiveIntervals::shrinkToUses() outside of loop iterating over
instructions to avoid instructions being deleted while pointed to by
iterator.
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312328 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312276 91177308-0d34-0410-b5e6-96231b3b80d8
It caused PR34387: Assertion failed: (RegNo < NumRegs && "Attempting to access record for invalid register number!")
> Issues identified by buildbots addressed since original review:
> - Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
> - The pass no longer forwards COPYs to physical register uses, since
> doing so can break code that implicitly relies on the physical
> register number of the use.
> - The pass no longer forwards COPYs to undef uses, since doing so
> can break the machine verifier by creating LiveRanges that don't
> end on a use (since the undef operand is not considered a use).
>
> [MachineCopyPropagation] Extend pass to do COPY source forwarding
>
> This change extends MachineCopyPropagation to do COPY source forwarding.
>
> This change also extends the MachineCopyPropagation pass to be able to
> be run during register allocation, after physical registers have been
> assigned, but before the virtual registers have been re-written, which
> allows it to remove virtual register COPY LiveIntervals that become dead
> through the forwarding of all of their uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312178 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would just describe the first register and then call it
quits. This patch emits fragment expressions for each register.
<rdar://problem/34075307>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312169 91177308-0d34-0410-b5e6-96231b3b80d8
Issues identified by buildbots addressed since original review:
- Fixed ARMLoadStoreOptimizer bug exposed by this change in r311907.
- The pass no longer forwards COPYs to physical register uses, since
doing so can break code that implicitly relies on the physical
register number of the use.
- The pass no longer forwards COPYs to undef uses, since doing so
can break the machine verifier by creating LiveRanges that don't
end on a use (since the undef operand is not considered a use).
[MachineCopyPropagation] Extend pass to do COPY source forwarding
This change extends MachineCopyPropagation to do COPY source forwarding.
This change also extends the MachineCopyPropagation pass to be able to
be run during register allocation, after physical registers have been
assigned, but before the virtual registers have been re-written, which
allows it to remove virtual register COPY LiveIntervals that become dead
through the forwarding of all of their uses.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312154 91177308-0d34-0410-b5e6-96231b3b80d8
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312144 91177308-0d34-0410-b5e6-96231b3b80d8
