Since this can be set with s_setreg*, it should not be a subtarget
property. Set a default based on the calling convention, and Introduce
a new amdgpu-dx10-clamp attribute to override this if desired.
Also introduce a new amdgpu-ieee attribute to match.
The values need to match to allow inlining. I think it is OK for the
caller's dx10-clamp attribute to override the callee, but there
doesn't appear to be the infrastructure to do this currently without
definining the attribute in the generic Attributes.td.
Eventually the calling convention lowering will need to insert a mode
switch somewhere for these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357302 91177308-0d34-0410-b5e6-96231b3b80d8
Added support for dwordx3 for most load/store types, but not DS, and not
intrinsics yet.
SI (gfx6) does not have dwordx3 instructions, so they are not enabled
there.
Some of this patch is from Matt Arsenault, also of AMD.
Differential Revision: https://reviews.llvm.org/D58902
Change-Id: I913ef54f1433a7149da8d72f4af54dbb13436bd9
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356659 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
I've extended the load/store optimizer to be able to produce dwordx3
loads and stores, This change allows many more load/stores to be combined,
and results in much more optimal code for our hardware.
Differential Revision: https://reviews.llvm.org/D54042
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348937 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@348050 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Reduce the statefulness of the algorithm in two ways:
1. More clearly split generateWaitcntInstBefore into two phases: the
first one which determines the required wait, if any, without changing
the ScoreBrackets, and the second one which actually inserts the wait
and updates the brackets.
2. Communicate pre-existing s_waitcnt instructions using an argument to
generateWaitcntInstBefore instead of through the ScoreBrackets.
To simplify these changes, a Waitcnt structure is introduced which carries
the counts of an s_waitcnt instruction in decoded form.
There are some functional changes:
1. The FIXME for the VCCZ bug workaround was implemented: we only wait for
SMEM instructions as required instead of waiting on all counters.
2. We now properly track pre-existing waitcnt's in all cases, which leads
to less conservative waitcnts being emitted in some cases.
s_load_dword ...
s_waitcnt lgkmcnt(0) <-- pre-existing wait count
ds_read_b32 v0, ...
ds_read_b32 v1, ...
s_waitcnt lgkmcnt(0) <-- this is too conservative
use(v0)
more code
use(v1)
This increases code size a bit, but the reduced latency should still be a
win in basically all cases. The worst code size regressions in my shader-db
are:
WORST REGRESSIONS - Code Size
Before After Delta Percentage
1724 1736 12 0.70 % shaders/private/f1-2015/1334.shader_test [0]
2276 2284 8 0.35 % shaders/private/f1-2015/1306.shader_test [0]
4632 4640 8 0.17 % shaders/private/ue4_elemental/62.shader_test [0]
2376 2384 8 0.34 % shaders/private/f1-2015/1308.shader_test [0]
3284 3292 8 0.24 % shaders/private/talos_principle/1955.shader_test [0]
Reviewers: msearles, rampitec, scott.linder, kanarayan
Subscribers: arsenm, kzhuravl, jvesely, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits, hakzsam
Differential Revision: https://reviews.llvm.org/D54226
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347848 91177308-0d34-0410-b5e6-96231b3b80d8
Add a pass to fixup various vector ISel issues.
Currently we handle converting GLOBAL_{LOAD|STORE}_*
and GLOBAL_Atomic_* instructions into their _SADDR variants.
This involves feeding the sreg into the saddr field of the new instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347008 91177308-0d34-0410-b5e6-96231b3b80d8
- Make sure IsaInfo::hasCodeObjectV3 returns true only
for AMDHSA
- Update assembler metadata tests to use v2 by default
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@347001 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Moving SMRD to VMEM in SIFixSGPRCopies is rather bad for performance if
the load is really uniform. So select the scalar load intrinsics directly
to either VMEM or SMRD buffer loads based on divergence analysis.
If an offset happens to end up in a VGPR -- either because a floating
point calculation was involved, or due to other remaining deficiencies
in SIFixSGPRCopies -- we use v_readfirstlane.
There is some unrelated churn in tests since we now select MUBUF offsets
in a unified way with non-scalar buffer loads.
Change-Id: I170e6816323beb1348677b358c9d380865cd1a19
Reviewers: arsenm, alex-t, rampitec, tpr
Subscribers: kzhuravl, jvesely, wdng, yaxunl, dstuttard, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D53283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@344696 91177308-0d34-0410-b5e6-96231b3b80d8
Move isa version determination into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342069 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r341982.
The change introduced a layering violation. Reverting to unbreak
our integrate.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342023 91177308-0d34-0410-b5e6-96231b3b80d8
into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
Differential Revision: https://reviews.llvm.org/D51890
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341982 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This commit adds new intrinsics
llvm.amdgcn.raw.buffer.load
llvm.amdgcn.raw.buffer.load.format
llvm.amdgcn.raw.buffer.load.format.d16
llvm.amdgcn.struct.buffer.load
llvm.amdgcn.struct.buffer.load.format
llvm.amdgcn.struct.buffer.load.format.d16
llvm.amdgcn.raw.buffer.store
llvm.amdgcn.raw.buffer.store.format
llvm.amdgcn.raw.buffer.store.format.d16
llvm.amdgcn.struct.buffer.store
llvm.amdgcn.struct.buffer.store.format
llvm.amdgcn.struct.buffer.store.format.d16
llvm.amdgcn.raw.buffer.atomic.*
llvm.amdgcn.struct.buffer.atomic.*
with the following changes from the llvm.amdgcn.buffer.*
intrinsics:
* there are separate raw and struct versions: raw does not have an
index arg and sets idxen=0 in the instruction, and struct always sets
idxen=1 in the instruction even if the index is 0, to allow for the
fact that gfx9 does bounds checking differently depending on whether
idxen is set;
* there is a combined cachepolicy arg (glc+slc)
* there are now only two offset args: one for the offset that is
included in bounds checking and swizzling, to be split between the
instruction's voffset and immoffset fields, and one for the offset
that is excluded from bounds checking and swizzling, to go into the
instruction's soffset field.
The AMDISD::BUFFER_* SD nodes always have an index operand, all three
offset operands, combined cachepolicy operand, and an extra idxen
operand.
The obsolescent llvm.amdgcn.buffer.* intrinsics continue to work.
Subscribers: arsenm, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, t-tye, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50306
Change-Id: If897ea7dc34fcbf4d5496e98cc99a934f62fc205
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@340269 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add _L to _LZ image intrinsic table mapping to table gen.
In ISelLowering check if image intrinsic has lod and if it's equal
to zero, if so remove lod and change opcode to equivalent mapped _LZ.
Change-Id: Ie24cd7e788e2195d846c7bd256151178cbb9ec71
Subscribers: arsenm, mehdi_amini, kzhuravl, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, steven_wu, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D49483
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@338523 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We now have two sets of generated TableGen files, one for R600 and one
for GCN, so each sub-target now has its own tables of instructions,
registers, ISel patterns, etc. This should help reduce compile time
since each sub-target now only has to consider information that
is specific to itself. This will also help prevent the R600
sub-target from slowing down new features for GCN, like disassembler
support, GlobalISel, etc.
Reviewers: arsenm, nhaehnle, jvesely
Reviewed By: arsenm
Subscribers: MatzeB, kzhuravl, wdng, mgorny, yaxunl, dstuttard, tpr, t-tye, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D46365
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335942 91177308-0d34-0410-b5e6-96231b3b80d8
Update AMDGPU assembler syntax behind the code-object-v3 feature:
* Replace/rename most AMDGPU assembler directives/symbols and document them.
* Provide more diagnostics (e.g. values out of range, missing values, repeated
values).
* Provide path for backwards compatibility, even with underlying descriptor
changes.
Differential Revision: https://reviews.llvm.org/D47736
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335281 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Having TableGen patterns for image intrinsics is hitting limitations:
for D16 we already have to manually pre-lower the packing of data
values, and we will have to do the same for A16 eventually.
Since there is already some custom C++ code anyway, it is arguably easier
to just do everything in C++, now that we can use the beefed-up generic
tables backend of TableGen to provide all the required metadata and map
intrinsics to corresponding opcodes. With this approach, all image
intrinsic lowering happens in SITargetLowering::lowerImage. That code is
dense due to all the cases that it handles, but it should still be easier
to follow than what we had before, by virtue of it all being done in a
single location, and by virtue of not relying on the TableGen pattern
magic that very few people really understand.
This means that we will have MachineSDNodes with MIMG instructions
during DAG combining, but that seems alright: previously we had
intrinsic nodes instead, but those are similarly opaque to the generic
CodeGen infrastructure, and the final pattern matching just did a 1:1
translation to machine instructions anyway. If anything, the fact that
we now merge the address words into a vector before DAG combine should
be an advantage.
Change-Id: I417f26bd88f54ce9781c1668acc01f3f99774de6
Reviewers: arsenm, rampitec, rtaylor, tstellar
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48017
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335228 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This allows us to access rich information about MIMG opcodes from C++ code.
Simplifying the mapping between equivalent opcodes of different data size
becomes quite natural.
This also flattens the MIMG-related class and multiclass hierarchy a little,
and collapses together some of the scaffolding for sample and gather4 opcodes.
Change-Id: I1a2549fdc1e881ff100e5393d2d87e73729a0ccd
Reviewers: arsenm, rampitec
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D48016
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@335227 91177308-0d34-0410-b5e6-96231b3b80d8
- Do not emit following assembler directives:
- .hsa_code_object_version
- .hsa_code_object_isa
- .amd_amdgpu_isa
- .amd_amdgpu_hsa_metadata
- .amd_amdgpu_pal_metadata
- Do not emit .note entries
- Cleanup and bring in sync kernel descriptor header file
- Emit kernel descriptor into .rodata with appropriate relocations and
alignments
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@334519 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
1. Remove max_scratch_backing_memory_byte_size from kernel header
2. Make it a reserved field
3. Ignore it while parsing assembly for backwards compatibility
4. Bump up minor version of kernel header
Differential Revision: https://reviews.llvm.org/D45452
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329620 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is in preparation for the new dimension-aware image intrinsics,
which I'd rather not have to list here by hand.
Change-Id: Iaa16e3a635a11283918ce0d9e1e618591b0bf6fa
Reviewers: arsenm, rampitec, b-sumner
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, llvm-commits, t-tye
Differential Revision: https://reviews.llvm.org/D44938
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328939 91177308-0d34-0410-b5e6-96231b3b80d8
In case if -mattr used to modify feature set bits in llvm-mc call
getIsaVersion can fail to identify specific ISA due to test mismatch.
Adding default fallback tests which will always correctly report at
least major version.
Differential Revision: https://reviews.llvm.org/D44163
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326825 91177308-0d34-0410-b5e6-96231b3b80d8
Note: This is a candidate for LLVM 6.0, because it was planned to be
in that release but was delayed due to a long review period.
Merge conflict in release_60 - resolution:
Add "-p6:32:32" into the second (non-amdgiz) string.
Only scalar loads support 32-bit pointers. An address in a VGPR will
fail to compile. That's OK because the results of loads will only be used
in places where VGPRs are forbidden.
Updated AMDGPUAliasAnalysis and used SReg_64_XEXEC.
The tests cover all uses cases we need for Mesa.
Reviewers: arsenm, nhaehnle
Subscribers: kzhuravl, wdng, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Differential Revision: https://reviews.llvm.org/D41651
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324487 91177308-0d34-0410-b5e6-96231b3b80d8
Stores failed to decode at all since they didn't have a
DecoderNamespace set. Loads worked, but did not change
the register width displayed to match the numbmer of
enabled channels.
The number of printed registers for vaddr is still wrong,
but I don't think that's encoded in the instruction so
there's not much we can do about that.
Image atomics are still broken. MIMG is the same
encoding for SI/VI, but the image atomic classes
are split up into encoding specific versions unlike
every other MIMG instruction. They have isAsmParserOnly
set on them for some reason. dmask is also special for
these, so we probably should not have it as an explicit
operand as it is now.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320614 91177308-0d34-0410-b5e6-96231b3b80d8
