This case was tested in the linker from code, but not from globals indexing into other globals. The linker currently barfs on this, ncbray volunteered to fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255601 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Use the SP32 physical register as the base for FrameIndex
lowering. Update it and the __stack_pointer global var in the prolog and
epilog. Extend the mapping of virtual registers to wasm locals to
include the physical registers.
Rather than modify the target-independent PrologEpilogInserter (which
asserts that there are no virtual registers left) include a
slightly-modified copy for Wasm that does not have this assertion and
only clears the virtual registers if scavenging was needed (which of
course it isn't for wasm).
Differential Revision: http://reviews.llvm.org/D15344
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255392 91177308-0d34-0410-b5e6-96231b3b80d8
ISD::FCOPYSIGN permits its operands to have differing types, and DAGCombiner
uses this. Add some def : Pat rules to expand this out into an explicit
conversion and a normal copysign operation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255220 91177308-0d34-0410-b5e6-96231b3b80d8
Target-specific instructions may have uninteresting physreg clobbers,
for target-specific reasons. The peephole pass doesn't need to concern
itself with such defs, as long as they're implicit and marked as dead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255182 91177308-0d34-0410-b5e6-96231b3b80d8
Reinteroduce the code for moving ARGUMENTS back to the top of the basic block.
While the ARGUMENTS physical register prevents sinking and scheduling from
moving them, it does not appear to be sufficient to prevent SelectionDAG from
moving them down in the initial schedule. This patch introduces a patch that
moves them back to the top immediately after SelectionDAG runs.
This is still hopefully a temporary solution. http://reviews.llvm.org/D14750 is
one alternative, though the review has not been favorable, and proposed
alternatives are longer-term and have other downsides.
This fixes the main outstanding -verify-machineinstrs failures, so it adds
-verify-machineinstrs to several tests.
Differential Revision: http://reviews.llvm.org/D15377
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@255125 91177308-0d34-0410-b5e6-96231b3b80d8
This patch introduces a codegen-only instruction currently named br_unless,
which makes it convenient to implement ReverseBranchCondition and re-enable
the MachineBlockPlacement pass. Then in a late pass, it lowers br_unless
back into br_if.
Differential Revision: http://reviews.llvm.org/D14995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254826 91177308-0d34-0410-b5e6-96231b3b80d8
Add physical register defs to instructions used from stackified
instructions to prevent them from being scheduled into the middle of
a stack sequence. This is a conservative measure which may be loosened
in the future.
Differential Revision: http://reviews.llvm.org/D15252
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254811 91177308-0d34-0410-b5e6-96231b3b80d8
When a block has no terminator instructions, getFirstTerminator() returns
end(), which can't be used in dominance checks. Check dominance for phi
operands separately.
Also, remove some bits from WebAssemblyRegStackify.cpp that were causing
trouble on the same testcase; they were left behind from an earlier
experiment.
Differential Revision: http://reviews.llvm.org/D15210
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254662 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of trying to move ARGUMENT instructions back up to the top after
they've been scheduled or sunk down, use a fake physical register to
create a liveness constraint that prevents ARGUMENT instructions from
moving down in the first place. This is still not entirely ideal, however
it is more robust than letting them move and moving them back.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@254084 91177308-0d34-0410-b5e6-96231b3b80d8
With the '=' suffix now indicating which operands are output operands, it's
no longer as important to distinguish between a call's inputs and its outputs
using operand ordering, so we can go back to printing them in the normal order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253925 91177308-0d34-0410-b5e6-96231b3b80d8
This distinguishes input operands from output operands. This is something of
a syntactic experiment to see whether the mild amount of clutter this adds is
outweighed by the extra information it conveys to the reader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253922 91177308-0d34-0410-b5e6-96231b3b80d8
The current approach to using get_local and set_local is to use them
implicitly, as register uses and defs. Introduce new copy instructions
which are themselves no-ops except for the get_local and set_local
that they imply, so that we use get_local and set_local consistently.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253905 91177308-0d34-0410-b5e6-96231b3b80d8
WebAssembly is currently using labels to end scopes, so for example a
loop scope looks like this:
BB0_0:
loop BB0_1
...
BB0_1:
with BB0_0 being the label of the first block not in the loop. This
requires that the label be printed even when it's only reachable via
fallthrough. To arrange this, insert a no-op LOOP_END instruction in
such cases at the end of the loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253901 91177308-0d34-0410-b5e6-96231b3b80d8
Always starting blocks at the top of their containing loops works, but creates
unnecessarily deep nesting because it makes all blocks in a loop overlap.
Refine the BLOCK placement algorithm to start blocks at nearest common
dominating points instead, which significantly shrinks them and reduces
overlapping.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253876 91177308-0d34-0410-b5e6-96231b3b80d8
These tests aren't testing that the result is valid syntax; they're testing
that the compiler emits the inline asm operands correctly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253469 91177308-0d34-0410-b5e6-96231b3b80d8
This also takes the push/pop syntax another step forward, introducing stack
slot numbers to make it easier to see how expressions are connected. For
example, the value pushed in $push7 is popped in $pop7.
And, this begins an experiment with making get_local and set_local implicit
when an operation directly uses or defines a register. This greatly reduces
clutter. If this experiment succeeds, it may make sense to do this for
const instructions as well.
And, this introduces more special code for ARGUMENTS; hopefully this code
will soon be obviated by proper support for live-in virtual registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253465 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously return type information for a function was derived from
return dag nodes. But this didn't work for dags with != return node. So
instead compute it directly from the LLVM function as is done for imports.
Differential Revision: http://reviews.llvm.org/D14593
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@253251 91177308-0d34-0410-b5e6-96231b3b80d8
Switch to MC for instruction printing.
This encompasses several changes which are all interconnected:
- Use the MC framework for printing almost all instructions.
- AsmStrings are now live.
- This introduces an indirection between LLVM vregs and WebAssembly registers,
and a new pass, WebAssemblyRegNumbering, for computing a basic the mapping.
This addresses some basic issues with argument registers and unused registers.
- The way ARGUMENT instructions are handled no longer generates redundant
get_local+set_local for every argument.
This also changes the assembly syntax somewhat; most notably, MC's printing
does not use sigils on label names, so those are no longer present, and
push/pop now have a sigil to keep them unambiguous.
The usage of set_local/get_local/$push/$pop will continue to evolve
significantly. This patch is just one step of a larger change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@252910 91177308-0d34-0410-b5e6-96231b3b80d8
