The lxv/stxv instructions require an offset that is 0 % 16. Previously we were
selecting lxv/stxv for loads and stores to the stack where the offset from the
slot was a multiple of 16, but the stack slot was not 16 or more byte aligned.
When the frame gets lowered these transform to r(1|31) + slot + offset.
If slot is not aligned, slot + offset may not be 0 % 16.
Now we require 16 byte or more alignment for select lxv/stxv to stack slots.
Includes a testcase that shows both sufficiently and insufficiently aligned
stack slots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312843 91177308-0d34-0410-b5e6-96231b3b80d8
- recommitting after fixing a test failure on MacOS
On PPC64, OR (XOR) with a 32-bit immediate can be done with only two instructions, i.e. ori + oris.
But the current LLVM generates three or four instructions for this purpose (and also it clobbers one GPR).
This patch makes PPC backend generate ori + oris (xori + xoris) for OR (XOR) with a 32-bit immediate.
e.g. (x | 0xFFFFFFFF) should be
ori 3, 3, 65535
oris 3, 3, 65535
but LLVM generates without this patch
li 4, 0
oris 4, 4, 65535
ori 4, 4, 65535
or 3, 3, 4
Differential Revision: https://reviews.llvm.org/D34757
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311538 91177308-0d34-0410-b5e6-96231b3b80d8
On PPC64, OR (XOR) with a 32-bit immediate can be done with only two instructions, i.e. ori + oris.
But the current LLVM generates three or four instructions for this purpose (and also it clobbers one GPR).
This patch makes PPC backend generate ori + oris (xori + xoris) for OR (XOR) with a 32-bit immediate.
e.g. (x | 0xFFFFFFFF) should be
ori 3, 3, 65535
oris 3, 3, 65535
but LLVM generates without this patch
li 4, 0
oris 4, 4, 65535
ori 4, 4, 65535
or 3, 3, 4
Differential Revision: https://reviews.llvm.org/D34757
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311526 91177308-0d34-0410-b5e6-96231b3b80d8
introduce a miscompile bug.
There appears to be a bug where the generated code to extract the sign
bit doesn't work correctly for 32-bit inputs. I've replied to the
original commit pointing out the problem. I think I see by inspection
(and reading the manual for PPC) how to fix this, but I can't be 100%
confident and I also don't know what the best way to test this is.
Currently it seems nearly impossible to get the backend to hit this code
path, but the patch autohr is likely in a better position to craft such
test cases than I am, and based on where the bug is it should be easily
done.
Original commit message for r310346:
"""
[PowerPC] Eliminate compares - add i32 sext/zext handling for SETLE/SETGE
Adds handling for SETLE/SETGE comparisons on i32 values. Furthermore, it
adds the handling for the special case where RHS == 0.
Differential Revision: https://reviews.llvm.org/D34048
"""
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@310809 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reduces compilation time by avoiding redundant analysis while selecting instructions to create an immediate.
If the instruction count required to create the input number without rotate is 2, we do not need further analysis to find a shorter instruction sequence with rotate; rotate + load constant cannot be done by 1 instruction (i.e. getInt64CountDirectnever return 0).
This patch should not change functionality.
Differential Revision: https://reviews.llvm.org/D34986
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307623 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC backend does not pass the current optimization level to SelectionDAGISel and so SelectionDAGISel works with the default optimization level regardless of the current optimization level.
This patch makes the PowerPC backend set the optimization level correctly.
Differential Revision: https://reviews.llvm.org/D34615
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306367 91177308-0d34-0410-b5e6-96231b3b80d8
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304787 91177308-0d34-0410-b5e6-96231b3b80d8
This patch is the first in a series of patches to provide code gen for
doing compares in GPRs when the compare result is required in a GPR.
It adds the infrastructure to select GPR sequences for i1->i32 and i1->i64
extensions. This first patch handles equality comparison on i32 operands with
the result sign or zero extended.
Differential Revision: https://reviews.llvm.org/D31847
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302810 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces the separate APInts for KnownZero/KnownOne with a single KnownBits struct. This is similar to what was done to ValueTracking's version recently.
This is largely a mechanical transformation from KnownZero to Known.Zero.
Differential Revision: https://reviews.llvm.org/D32569
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301620 91177308-0d34-0410-b5e6-96231b3b80d8
This will become asan errors once the patch lands that poisons the
memory after free. The x86 change is a hack, but I don't see how to
solve this properly at the moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300867 91177308-0d34-0410-b5e6-96231b3b80d8
1) Explicitly sets mayLoad/mayStore property in the tablegen files on load/store
instructions.
2) Updated the flags on a number of intrinsics indicating that they write
memory.
3) Added SDNPMemOperand flags for some target dependent SDNodes so that they
propagate their memory operand
Review: https://reviews.llvm.org/D28818
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293200 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292154 91177308-0d34-0410-b5e6-96231b3b80d8
Generally, the ISEL is expanded into if-then-else sequence, in some
cases (like when the destination register is the same with the true
or false value register), it may just be expanded into just the if
or else sequence.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292128 91177308-0d34-0410-b5e6-96231b3b80d8
GPRC and GPRC_NOR0 (or the 64bit equivalent) and not just the latter.
GPRC_NOR0 contains ZERO as alternative meaning of r0 and is therefore
not a true subclass of GPRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285813 91177308-0d34-0410-b5e6-96231b3b80d8
https://reviews.llvm.org/D24924
This improves the code generated for a sequence of AND, ANY_EXT, SRL instructions. This is a targetted fix for this special pattern. The pattern is generated by target independet dag combiner and so a more general fix may not be necessary. If we come across other similar cases, some ideas for handling it are discussed on the code review.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284983 91177308-0d34-0410-b5e6-96231b3b80d8
This is a patch to implement pr30640.
When a 64bit constant has the same hi/lo words, we can use rldimi to copy the low word into high word of the same register.
This optimization caused failure of test case bperm.ll because of not optimal heuristic in function SelectAndParts64. It chooses AND or ROTATE to extract bit groups from a register, and OR them together. This optimization lowers the cost of loading 64bit constant mask used in AND method, and causes different code sequence. But actually ROTATE method is better in this test case. The reason is in ROTATE method the final OR operation can be avoided since rldimi can insert the rotated bits into target register directly. So this patch also enhances SelectAndParts64 to prefer ROTATE method when the two methods have same cost and there are multiple bit groups need to be ORed together.
Differential Revision: https://reviews.llvm.org/D25521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284276 91177308-0d34-0410-b5e6-96231b3b80d8
When folding an addi into a memory access that can take an immediate offset, we
were implicitly assuming that the existing offset was zero. This was incorrect.
If we're dealing with an addi with a plain constant, we can add it to the
existing offset (assuming that doesn't overflow the immediate, etc.), but if we
have anything else (i.e. something that will become a relocation expression),
we'll go back to requiring the existing immediate offset to be zero (because we
don't know what the requirements on that relocation expression might be - e.g.
maybe it is paired with some addis in some relevant way).
On the other hand, when dealing with a plain addi with a regular constant
immediate, the alignment restrictions (from the TOC base pointer, etc.) are
irrelevant.
I've added the test case from PR30280, which demonstrated the bug, but also
demonstrates a missed optimization opportunity (i.e. we don't need the memory
accesses at all).
Fixes PR30280.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280789 91177308-0d34-0410-b5e6-96231b3b80d8
When we have an offset into a global, etc. that is accessed relative to the TOC
base pointer, and the offset is larger than the minimum alignment of the global
itself and the TOC base pointer (which is 8-byte aligned), we can still fold
the @toc@ha into the memory access, but we must update the addis instruction's
symbol reference with the offset as the symbol addend. When there is only one
use of the addi to be folded and only one use of the addis that would need its
symbol's offset adjusted, then we can make the adjustment and fold the @toc@l
into the memory access.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280545 91177308-0d34-0410-b5e6-96231b3b80d8
When applying our address-formation PPC64 peephole, we are reusing the @ha TOC
addis value with the low parts associated with different offsets (i.e.
different effective symbol addends). We were assuming this was okay so long as
the offsets were less than the alignment of the global variable being accessed.
This ignored the fact, however, that the TOC base pointer itself need only be
8-byte aligned. As a result, what we were doing is legal only for offsets less
than 8 regardless of the alignment of the object being accessed.
Fixes PR28727.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280441 91177308-0d34-0410-b5e6-96231b3b80d8
The logic in this function assumes that the P8 supports fusion of addis/addi,
but it does not. As a result, there is no advantage to restricting our peephole
application, merging addi instructions into dependent memory accesses, even
when the addi has multiple users, regardless of whether or not we're optimizing
for size.
We might need something like this again for the P9; I suspect we'll revisit
this code when we work on P9 tuning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280440 91177308-0d34-0410-b5e6-96231b3b80d8
This is a mechanical change of comments in switches like fallthrough,
fall-through, or fall-thru to use the LLVM_FALLTHROUGH macro instead.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278902 91177308-0d34-0410-b5e6-96231b3b80d8
This used to be free, copying and moving DebugLocs became expensive
after the metadata rewrite. Passing by reference eliminates a ton of
track/untrack operations. No functionality change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272512 91177308-0d34-0410-b5e6-96231b3b80d8
subclasses. These are not passes proper. We don't support registering
them, they can't be constructed with default arguments, and the ID is
actually in a base class.
Only these two targets even had any boiler plate to try to do this, and
it had to be munged out of the INITIALIZE_PASS macros to work. What's
worse, the boiler plate has rotted and the "name" of the pass is
actually the description string now!!! =/ All of this is completely
unnecessary. No other target bothers, and nothing breaks if you don't
initialize them because CodeGen has an entirely separate initialization
path that is somewhat more durable than relying on the implicit
initialization the way the 'opt' tool does for registered passes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@271650 91177308-0d34-0410-b5e6-96231b3b80d8
- Where we were returning a node before, call ReplaceNode instead.
- Where we would return null to fall back to another selector, rename
the method to try* and return a bool for success.
- Where we were calling SelectNodeTo, just return afterwards.
Part of llvm.org/pr26808.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@270283 91177308-0d34-0410-b5e6-96231b3b80d8
This is a step towards removing the rampant undefined behaviour in
SelectionDAG, which is a part of llvm.org/PR26808.
We rename SelectionDAGISel::Select to SelectImpl and update targets to
match, and then change Select to return void and consolidate the
sketchy behaviour we're trying to get away from there.
Next, we'll update backends to implement `void Select(...)` instead of
SelectImpl and eventually drop the base Select implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@268693 91177308-0d34-0410-b5e6-96231b3b80d8
