Summary:
This patch teaches ADCE to preserve both DominatorTrees and PostDominatorTrees.
This is reapplies the original patch r311057 that was reverted in r311381.
The previous version wasn't using the batch update api for updating dominators,
which in vary rare cases caused assertion failures.
This also fixes PR34258.
Reviewers: dberlin, chandlerc, sanjoy, davide, grosser, brzycki
Reviewed By: davide
Subscribers: grandinj, zhendongsu, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D35869
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311467 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch teaches ADCE to preserve both DominatorTrees and PostDominatorTrees.
I didn't notice any performance impact when bootstrapping clang with this patch.
The patch was originally committed in r311039 and reverted in r311049.
This revision fixes the problem with not adding a dependency on the
DominatorTreeWrapperPass for the LegacyPassManager.
Reviewers: dberlin, chandlerc, sanjoy, davide, grosser, brzycki
Reviewed By: davide
Subscribers: grandinj, zhendongsu, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D35869
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311057 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch teaches ADCE to preserve both DominatorTrees and PostDominatorTrees.
I didn't notice any performance impact when bootstrapping clang with this patch.
Reviewers: dberlin, chandlerc, sanjoy, davide, grosser, brzycki
Reviewed By: davide
Subscribers: grandinj, zhendongsu, llvm-commits, david2050
Differential Revision: https://reviews.llvm.org/D35869
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311039 91177308-0d34-0410-b5e6-96231b3b80d8
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@309426 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is last in of a series of patches to evolve ADCE.cpp to support
removing of unnecessary control flow.
This patch adds the code to update the control and data flow graphs
to remove the dead control flow.
Also update unit tests to test the capability to remove dead,
may-be-infinite loop which is enabled by the switch
-adce-remove-loops.
Previous patches:
D23824 [ADCE] Add handling of PHI nodes when removing control flow
D23559 [ADCE] Add control dependence computation
D23225 [ADCE] Modify data structures to support removing control flow
D23065 [ADCE] Refactor anticipating new functionality (NFC)
D23102 [ADCE] Refactoring for new functionality (NFC)
Reviewers: dberlin, majnemer, nadav, mehdi_amini
Subscribers: llvm-commits, david2050, freik, twoh
Differential Revision: https://reviews.llvm.org/D24918
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289548 91177308-0d34-0410-b5e6-96231b3b80d8
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266446 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM optimization passes may reduce a profiled target expression
to a constant. Removing runtime calls at such instrumentation points
would help speedup the runtime of the instrumented program.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@266229 91177308-0d34-0410-b5e6-96231b3b80d8
During ADCE, track which debug info scopes still have live references
from the code, and delete debug info intrinsics for the dead ones.
These intrinsics describe the locations of variables (in registers or
stack slots). If there's no code left corresponding to a variable's
scope, then there's no way to reference the variable in the debugger and
it doesn't matter what its value is.
I add a DEBUG printout when the described location in an SSA register,
in case it helps some trying to track down why locations get lost.
However, we still delete these; the scope itself isn't attached to any
real code, so the ship has already sailed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@264800 91177308-0d34-0410-b5e6-96231b3b80d8
The personality routine currently lives in the LandingPadInst.
This isn't desirable because:
- All LandingPadInsts in the same function must have the same
personality routine. This means that each LandingPadInst beyond the
first has an operand which produces no additional information.
- There is ongoing work to introduce EH IR constructs other than
LandingPadInst. Moving the personality routine off of any one
particular Instruction and onto the parent function seems a lot better
than have N different places a personality function can sneak onto an
exceptional function.
Differential Revision: http://reviews.llvm.org/D10429
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@239940 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
- Instead of setting the suffixes in a bunch of places, just set one master
list in the top-level config. We now only modify the suffix list in a few
suites that have one particular unique suffix (.ml, .mc, .yaml, .td, .py).
- Aside from removing the need for a bunch of lit.local.cfg files, this enables
4 tests that were inadvertently being skipped (one in
Transforms/BranchFolding, a .s file each in DebugInfo/AArch64 and
CodeGen/PowerPC, and one in CodeGen/SI which is now failing and has been
XFAILED).
- This commit also fixes a bunch of config files to use config.root instead of
older copy-pasted code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@188513 91177308-0d34-0410-b5e6-96231b3b80d8
input filename so that opt doesn't print the input filename in the
output so that grep lines in the tests don't unintentionally match
strings in the input filename.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@81537 91177308-0d34-0410-b5e6-96231b3b80d8
the optimizers about this. For example, a readonly
function with no uses cannot be removed unless it is
also marked nounwind.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@71071 91177308-0d34-0410-b5e6-96231b3b80d8
the one case that ADCE catches that normal DCE doesn't: non-induction variable
loop computations.
This implementation handles this problem without using postdominators.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@51668 91177308-0d34-0410-b5e6-96231b3b80d8
from transforming loops and adding a separate loop pass for removing
loops with know trip counts. Until that happens, ADCE is miscompiling this code.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@49769 91177308-0d34-0410-b5e6-96231b3b80d8
OnlyReadsMemoryFns tables are dead! We
get more, and more accurate, information
from gcc via the readnone and readonly
function attributes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@44288 91177308-0d34-0410-b5e6-96231b3b80d8
global variables that needed to be passed in. This makes it possible to
add new global variables with only a couple changes (Makefile and llvm-dg.exp)
instead of touching every single dg.exp file.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@35918 91177308-0d34-0410-b5e6-96231b3b80d8
