Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306933 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306336 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305960 91177308-0d34-0410-b5e6-96231b3b80d8
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7649
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Reviewers: rafael, dexonsmith, grosser
Differential Revision: http://reviews.llvm.org/D7636
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230786 91177308-0d34-0410-b5e6-96231b3b80d8
This update was done with the following bash script:
find test/Transforms -name "*.ll" | \
while read NAME; do
echo "$NAME"
if ! grep -q "^; *RUN: *llc" $NAME; then
TEMP=`mktemp -t temp`
cp $NAME $TEMP
sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \
while read FUNC; do
sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP
done
mv $TEMP $NAME
fi
done
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@186268 91177308-0d34-0410-b5e6-96231b3b80d8
the target if it supports the different CAST types. We didn't do this
on X86 because of the different register sizes and types, but on ARM
this makes sense.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@172245 91177308-0d34-0410-b5e6-96231b3b80d8
