This change only treats imported and exports functions and globals
as symbol table entries the object has a "linking" section (i.e. it is
relocatable object file).
In this case all globals must be of type I32 and initialized with
i32.const. This was previously being assumed but not checked for and
was causing a failure on big endian machines due to using the wrong
value of then union.
See: https://bugs.llvm.org/show_bug.cgi?id=34487
Differential Revision: https://reviews.llvm.org/D37497
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312674 91177308-0d34-0410-b5e6-96231b3b80d8
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312144 91177308-0d34-0410-b5e6-96231b3b80d8
lld needs a matching change for this will be my next commit.
Expect it to fail build until that matching commit is picked up by the bots.
Like the changes in r296527 for dyld bind entires and the changes in
r298883 for lazy bind, weak bind and rebase entries the export
entries are the last of the dyld compact info to have error handling added.
This follows the model of iterators that can fail that Lang Hanes
designed when fixing the problem for bad archives r275316 (or r275361).
So that iterating through the exports now terminates if there is an error
and returns an llvm::Error with an error message in all cases for malformed
input.
This change provides the plumbing for the error handling, all the needed
testing of error conditions and test cases for all of the unique error messages.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308690 91177308-0d34-0410-b5e6-96231b3b80d8
All other code in MachODump.cpp uses the same comparison,
((r_length & 0x1) == 1), for distinguishing between the two,
while the code in llvm-objdump.cpp seemed to be incorrect.
Differential Revision: https://reviews.llvm.org/D35240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307882 91177308-0d34-0410-b5e6-96231b3b80d8
For each checked-in wasm file, make sure the there is
corresponding .ll file that can be used to regenerate it
if needed.
Add test/Object/Inputs/trivial-object-test.wasm to match other
formats and add some new wasm tests in test/Object.
Differential Revision: https://reviews.llvm.org/D35213
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307585 91177308-0d34-0410-b5e6-96231b3b80d8
it symbolically disassembles the __text section from the
__TEXT_EXEC segment not the usual __TEXT segment by default.
rdar://30590208
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306046 91177308-0d34-0410-b5e6-96231b3b80d8
file types so it symbolically disassembles operands using the external
relocation entries.
rdar://31521343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306037 91177308-0d34-0410-b5e6-96231b3b80d8
in the base address.
Without this Mach-O files, like 64-bit executables, don’t have the correct
addresses printed for their exports. As the default is to link at address
0x100000000 not zero.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305744 91177308-0d34-0410-b5e6-96231b3b80d8
This may trigger a segfault in llvm-objdump when the line number stored
in debug infromation points beyond the end of file; lines in LineBuffer
are stored in std::vector which is allocated in chunks, so even if the
debug info points beyond the end of the file, this doesn't necessarily
trigger the segfault unless the line number points beyond the allocated
space.
Differential Revision: https://reviews.llvm.org/D32466
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301347 91177308-0d34-0410-b5e6-96231b3b80d8
BIND_OPCODE_DONE/REBASE_OPCODE_DONE may appear at the end of the opcode array,
but they are not required to. The linker only adds them as padding to align the
opcodes to pointer size.
This fixes rdar://problem/31285560.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299104 91177308-0d34-0410-b5e6-96231b3b80d8
Mostly this change adds support converting to and from
YAML which will allow us to write more test cases for
the WebAssembly MC and lld ports.
Better support for objdump, readelf, and nm will be in
followup CLs.
I had to update the two wasm test binaries because they
used the old style 'name' section which is no longer
supported.
Differential Revision: https://reviews.llvm.org/D31099
Patch by Sam Clegg
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@299101 91177308-0d34-0410-b5e6-96231b3b80d8
rebase entry errors and test cases for each of the error checks.
Also verified with Nick Kledzik that a BIND_OPCODE_SET_ADDEND_SLEB
opcode is legal in a lazy bind table, so code that had that as an error
check was removed.
With MachORebaseEntry and MachOBindEntry classes now returning
an llvm::Error in all cases for malformed input the variables Malformed
and logic to set use them is no longer needed and has been removed
from those classes.
Also in a few places, removed the redundant Done assignment to true
when also calling moveToEnd() as it does that assignment.
This only leaves the dyld compact export entries left to have
error handling yet to be added for the dyld compact info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298883 91177308-0d34-0410-b5e6-96231b3b80d8
and test cases for each of the error checks.
To do this more plumbing was needed so that the segment indexes and
segment offsets can be checked. Basically what was done was the SegInfo
from llvm-objdump’s MachODump.cpp was moved into libObject for Mach-O
objects as BindRebaseSegInfo and it is only created when an iterator for
bind or rebase entries are created.
This commit really only adds the error checking and test cases for the
bind table entires and the checking for the lazy bind and weak bind entries
are still to be fully done as well as the rebase entires. Though some of
the plumbing for those are added with this commit. Those other error
checks and test cases will be added in follow on commits.
Note, the two llvm_unreachable() calls should now actually be unreachable
with the error checks in place and would take a logic bug in the error
checking code to be reached if the segment indexes and segment
offsets are used from a checked bind entry. Comments have been added
to the methods that require the arguments to have been checked
prior to calling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@298292 91177308-0d34-0410-b5e6-96231b3b80d8
other tables. Providing a helpful error message to what the error is and
where the error occurred based on which opcode it was associated with.
There have been handful of bug fixes dealing with bad bind info in
object files, r294021 and r249845, which only put a band aid on the
problem after a bad bind table was created after unpacking from
its compact info. In these cases a bind table should have never been
created and an error should have simply been generated.
This change puts in place the plumbing to allow checking and returning
of an error when the compact info is unpacked. This follows the model
of iterators that can fail that Lang Hanes designed when fixing the problem
for bad archives r275316 (or r275361).
This change uses one of the existing test cases that now causes an
error instead of printing <<bad library ordinal>> after a bad bind table
is created. The error uses the offset into the opcode table as shown with
the macOS dyldinfo(1) tool to indicate where the error is and which
opcode and which parameter is in error.
For example the exiting test case has this lazy binding opcode table:
% dyldinfo -opcodes test/tools/llvm-objdump/Inputs/bad-ordinal.macho-x86_64
…
lazy binding opcodes:
0x0000 BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB(0x02, 0x00000010)
0x0002 BIND_OPCODE_SET_DYLIB_ORDINAL_IMM(2)
In the test case the binary only has one library so setting the library
ordinal to the value of 2 in the BIND_OPCODE_SET_DYLIB_ORDINAL_IMM
opcode at 0x0002 above is an error. This now produces this error message:
% llvm-objdump -lazy-bind bad-ordinal.macho-x86_64
…
llvm-objdump: 'bad-ordinal.macho-x86_64': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 2 (max 1) for opcode at: 0x2)
This change provides the plumbing for the error handling and one example
of an error message. Other error checks and test cases will be added in follow
on commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296527 91177308-0d34-0410-b5e6-96231b3b80d8
in this case for CPU_SUBTYPE_ARM64_ALL.
For this cpusubtype it should default to a cyclone CPU
to give proper disassembly without a -mcpu= flag.
rdar://27767188
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294771 91177308-0d34-0410-b5e6-96231b3b80d8
that it works when the ObjC metadata sections end up in the
__DATA_CONST or __DATA_DIRTY segments.
rdar://26315238
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294599 91177308-0d34-0410-b5e6-96231b3b80d8
Disassembly currently begins from addresses obtained from the objects
symbol table. For ELF, add the dynamic symbols to the list if no
static symbols are available so that we can more successfully
disassemble stripped binaries.
Differential Revision: https://reviews.llvm.org/D29632
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294430 91177308-0d34-0410-b5e6-96231b3b80d8
which caused it to print more than the (__TEXT,__info_plist) if that
section did not end with a null.
rdar://27378808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294236 91177308-0d34-0410-b5e6-96231b3b80d8
which caused it to not disassemble the bytes a the start of the section if
the section had symbols and the first symbol was not at the start of the
section.
rdar://30143243
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@294212 91177308-0d34-0410-b5e6-96231b3b80d8
without symbols that makes calls through a symbol stub which were not
correctly being annotated with “## symbol stub for: _foo”.
Just adds the same parameters for getting the annotations from
DisAsm->getInstruction() and passing them to IP->printInst() from the
code above when boolean variable symbolTableWorked was true.
rdar://29791952
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293662 91177308-0d34-0410-b5e6-96231b3b80d8
To better match the old darwin otool(1) behavior, when llvm-obdump(1) is used
with the -macho option and the input file is not an object file simply print
the file name and this message:
foo: is not an object file
and continue on to process other input files. Also in this case don’t exit
non-zero. This should help in some OSS projects' with autoconf scripts
that are expecting the old darwin otool(1) behavior.
rdar://26828015
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293547 91177308-0d34-0410-b5e6-96231b3b80d8
for CPU_SUBTYPE_ARM_V7S and CPU_SUBTYPE_ARM_V7K.
For these two cpusubtypes they should default to a cortex-a7 CPU
to give proper disassembly without a -mcpu= flag.
rdar://27431703
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292993 91177308-0d34-0410-b5e6-96231b3b80d8
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292829 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292824 91177308-0d34-0410-b5e6-96231b3b80d8
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292500 91177308-0d34-0410-b5e6-96231b3b80d8
An ELFObjectFile can now create SubtargetFeatures from the available
ARM build attributes, in a similar manner to MIPS. I've moved the
MIPS code into its own function and the ARM handler also has a
separate function.
Differential Revision: https://reviews.llvm.org/D28291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292403 91177308-0d34-0410-b5e6-96231b3b80d8
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292366 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Tests under tools/llvm-objdump should not use inputs from Object. Copied the
required inputs and aligned the new tests to be more consistent with the existing
tests in this respect.
Reviewers: ioeric
Reviewed By: ioeric
Subscribers: davide, djasper, cfe-commits
Differential Revision: https://reviews.llvm.org/D28799
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292222 91177308-0d34-0410-b5e6-96231b3b80d8
