When cross-compiling, we cannot use the just built toolchain, instead
we need to use the host toolchain which we assume has a support for
targeting the selected target platform. We also need to pass the path
to the native version of llvm-config to external projects.
Differential Revision: https://reviews.llvm.org/D41678
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322046 91177308-0d34-0410-b5e6-96231b3b80d8
If the make program isn't in the path, the native configure will fail.
Pass CMAKE_MAKE_PROGRAM to the native configure explicitly to remedy
this, similar to what's already done for external project configuration.
Explicitly set CMAKE_MAKE_PROGRAM before the user flags so that they can
override it for the native build if they desire (though I can't fathom
why that would be useful).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322032 91177308-0d34-0410-b5e6-96231b3b80d8
r320413 triggered cmake configure failures when building with
-DLLVM_OPTIMIZED_TABLEGEN=True and with LLVM_EXPERIMENTAL_TARGETS_TO_BUILD set
(e.g. to RISCV). This is because that patch moved to passing through
LLVM_TARGETS_TO_BUILD, and at that point LLVM_EXPERIMENTAL_TARGETS_TO_BUILD
has been merged in to it. LLVM_EXPERIMENTAL_TARGETS_TO_BUILD must be also be
passed through to avoid errors like below:
-- Constructing LLVMBuild project information
CMake Error at CMakeLists.txt:682 (message):
The target `RISCV' does not exist.
It should be one of
AArch64;AMDGPU;ARM;BPF;Hexagon;Lanai;Mips;MSP430;NVPTX;PowerPC;Sparc;SystemZ;X86;XCore
-- Configuring incomplete, errors occurred!
See the thread
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20171211/509225.html
for discussion of this fix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320556 91177308-0d34-0410-b5e6-96231b3b80d8
In r319620, the host build was changed to use Native for
TARGETS_TO_BUILD because passing semicolons through add_custom_command
is surprisingly difficult. However, Native really doesn't make any
sense here, and it only works because we don't technically do any
codegen in the host tools so pretty well anything will "work".
The problem here is that passing something other than the correct
value is very fragile - as evidence note how the llvm-config in the
host tools acts differently than the target one now, and misreports
the targets to build. Similarly, if there is any logic conditional on
the targets in tablegen (now or in the future), it will do the wrong
thing.
To fix this, we need to escape the semicolons in the targets string
and pass it through to the child cmake invocation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320413 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r319898 made it possible to override these variables via the
CROSS_TOOLCHAIN_FLAGS setting, but this only worked if one explicitly
specifies these variables there. If, instead, one uses
CROSS_TOOLCHAIN_FLAGS to specify a toolchain file (as our internal
builds do, to point cmake to a checked-in toolchain), the
CMAKE_C(XX)_COMPILER flags would still win over the ones specified by
the toolchain file.
To fix is to make the mere presence of these flags overridable. I do
this by putting them as a default value for the CROSS_TOOLCHAIN_FLAGS
setting, so they can be overridden at cmake configuration time.
Reviewers: hintonda, beanz
Subscribers: bogner, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D40947
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320138 91177308-0d34-0410-b5e6-96231b3b80d8
they can be overridden when cross compiling.
Summary:
Since CROSS_TOOLCHAN_FLAGS can set CMAKE_(C|CXX)_COMPILER
variables, move the compiler variables up front so they can be
overridden.
This is a followup to https://reviews.llvm.org/D40229 committed in rL319620.
Thanks to Pavel Labath for reporting this issue.
Reviewers: labath, beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319898 91177308-0d34-0410-b5e6-96231b3b80d8
Also pass CMAKE_(C|CXX)_COMPILER to add_custom_command.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319620 91177308-0d34-0410-b5e6-96231b3b80d8
Only pass Native to LLVM_TARGETS_TO_BUILD.
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319574 91177308-0d34-0410-b5e6-96231b3b80d8
The ';' separators in LLVM_TARGETS_TO_BUILD disappear when list
variables are evaluated in custom commands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319268 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Remove the redundant, config-time call to cmake when
building host tools for cross compiles or optimized tablegen..
The config-time call to cmake is redundant because it will always get
called again when the CONFIGURE_LLVM_${target_name} target fires at
build-time. This speeds up initial configuration, but has no affect
on build behavior.
Reviewers: beanz
Reviewed By: beanz
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D40229
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319176 91177308-0d34-0410-b5e6-96231b3b80d8
CMake does a poor job in tracking dependencies on files and directories
directly. Create custom target similar to the configuration step.
On my system, this avoids the reconfiguration on each build.
Differential Revision: https://reviews.llvm.org/D39298
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317694 91177308-0d34-0410-b5e6-96231b3b80d8
This was called out on the list a long time ago and just got pointed out to me again. Need to fix it before I forget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272201 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Cross-compilation uses recursive cmake invocations to build native host
tools. These recursive invocations only forward a fixed set of
variables/options, since the native environment is generally the default.
This change adds -DLLVM_TARGET_IS_CROSSCOMPILE_HOST=TRUE to the recursive
cmake invocations, so that cmake files can distinguish these recursive
invocations from top-level ones, which can explain why expected options
are unset.
LLILC will use this to avoid trying to generate its build rules in the
crosscompile native host target (where it is not needed), which would fail
if attempted because LLILC requires a cmake variable passed on the command
line, which is not forwarded in the recursive invocation.
Reviewers: rnk, beanz
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D12679
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247151 91177308-0d34-0410-b5e6-96231b3b80d8
* put most of the cross-compiling support into a function llvm_create_cross_target_internal.
* when CrossCompile is included it still generates a NATIVE target.
* llvm_create_cross_target function takes a target_name which should match a toolchain.
* llvm_create_cross_target can now be used to target more than one cross-compilation target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@232067 91177308-0d34-0410-b5e6-96231b3b80d8
The basic idea is similar to the existing cross compilation support. A directory must be configured to build host versions of tablegen tools and llvm-config. This directory can be user provided (and configured), or it can be created during the build. During a build the native build directory will be configured and built to supply the tablegen tools used during the build. A user could also explicitly provide the tablegen executables to run on the CMake command line.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@217105 91177308-0d34-0410-b5e6-96231b3b80d8
