See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
I replaced all uses of LLVM_ON_WIN32 with _WIN32 in r331127 (llvm),
r331069 (clang), r329697 (lldb), r329696 (lld), r329696 (clang-tools-extra).
If your out-of-tree program used LLVM_ON_WIN32, just use _WIN32 instead, which
is set at exactly the same time to exactly the same value.
https://reviews.llvm.org/D46264
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331224 91177308-0d34-0410-b5e6-96231b3b80d8
These used to be set in the old autoconf build, but the cmake build has had a
"TODO: actually check for these" comment since it was checked in, and they
were set to 1 on mingw unconditionally. It seems safe to say that they always
exist under mingw, so just remove them and assume they're set exactly when on
mingw (with msvc, we use `pragma comment` instead of linking these via flags).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328992 91177308-0d34-0410-b5e6-96231b3b80d8
The autoconf manual: "This macro is obsolescent, as all current systems with
directory libraries have <dirent.h>. New programs need not use this macro."
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328989 91177308-0d34-0410-b5e6-96231b3b80d8
These should exist in all toolchains LLVM supports nowadays.
Enables making DataTypes.h a regular header instead of a .h.cmake file and
allows deleting a bunch of cmake goop (which should also speed up cmake
configure time a bit).
All the code this removes is 9+ years old.
https://reviews.llvm.org/D45155
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328970 91177308-0d34-0410-b5e6-96231b3b80d8
Found by looking through the output of
for f in $(grep -o '\bHAVE_[A-Z0-9_]*\b' llvm/cmake/config-ix.cmake); do
echo $f $(git grep $f '*' | wc -l);
done
in the monorepo.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@328957 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
This re-commit fixes a missing include of <vector> which it seems clang didn't
mind but G++ and MSVC objected to. It seems that, clang was ok with std::vector
only being forward declared at the point of use since it was fully defined
eventually but G++/MSVC both rejected it at the point of use.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326738 91177308-0d34-0410-b5e6-96231b3b80d8
Despite building cleanly on my machine in three separate configs, it's failing on pretty much all bots due to missing includes among other things. Investigating.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326726 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326723 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds a LLVM_ENABLE_GISEL_COV which, like LLVM_ENABLE_DAGISEL_COV,
causes TableGen to instrument the generated table to collect rule coverage
information. However, LLVM_ENABLE_GISEL_COV goes a bit further than
LLVM_ENABLE_DAGISEL_COV. The information is written to files
(${CMAKE_BINARY_DIR}/gisel-coverage-* by default). These files can then be
concatenated into ${LLVM_GISEL_COV_PREFIX}-all after which TableGen will
read this information and use it to emit warnings about untested rules.
This technique could also be used by SelectionDAG and can be further
extended to detect hot rules and give them priority over colder rules.
Usage:
* Enable LLVM_ENABLE_GISEL_COV in CMake
* Build the compiler and run some tests
* cat gisel-coverage-[0-9]* > gisel-coverage-all
* Delete lib/Target/*/*GenGlobalISel.inc*
* Build the compiler
Known issues:
* ${LLVM_GISEL_COV_PREFIX}-all must be generated as a manual
step due to a lack of a portable 'cat' command. It should be the
concatenation of all ${LLVM_GISEL_COV_PREFIX}-[0-9]* files.
* There's no mechanism to discard coverage information when the ruleset
changes
Depends on D39742
Reviewers: ab, qcolombet, t.p.northover, aditya_nandakumar, rovka
Reviewed By: rovka
Subscribers: vsk, arsenm, nhaehnle, mgorny, kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D39747
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318356 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315590 91177308-0d34-0410-b5e6-96231b3b80d8
But now include a check for CPU_COUNT so we still build on 10 year old
versions of glibc.
Original message:
Use sched_getaffinity instead of std:🧵:hardware_concurrency.
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314931 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This reverts D38481. The change breaks systems with older versions of glibc. It
injects a use of CPU_COUNT() from sched.h without checking to ensure that the
function exists first.
Reviewers:
Subscribers:
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314922 91177308-0d34-0410-b5e6-96231b3b80d8
The issue with std:🧵:hardware_concurrency is that it forwards
to libc and some implementations (like glibc) don't take thread
affinity into consideration.
With this change a llvm program that can execute in only 2 cores will
use 2 threads, even if the machine has 32 cores.
This makes benchmarking a lot easier, but should also help if someone
doesn't want to use all cores for compilation for example.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314809 91177308-0d34-0410-b5e6-96231b3b80d8
No behavior is changed if LLVM_TARGET_TRIPLE_ENV is blank or undefined.
If LLVM_TARGET_TRIPLE_ENV is "TEST_TARGET_TRIPLE" and $TEST_TARGET_TRIPLE is not blank,
llvm::sys::getDefaultTargetTriple() returns $TEST_TARGET_TRIPLE.
Lit resets config.target_triple and config.environment[LLVM_TARGET_TRIPLE_ENV] to change the default target.
Without changing LLVM_DEFAULT_TARGET_TRIPLE nor rebuilding, lit can be run;
TEST_TARGET_TRIPLE=i686-pc-win32 bin/llvm-lit -sv path/to/test/
TEST_TARGET_TRIPLE=i686-pc-win32 ninja check-clang-tools
Differential Revision: https://reviews.llvm.org/D33662
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305632 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Reverse iteration can be turned on, by default, by setting -DLLVM_REVERSE_ITERATION:BOOL=ON during cmake.
With this enabled, we can uncover lots of cases of non-determinism in codegen by simply running our tests (without any other change).
We can then setup a buildbot which will have this turned on by default. Initially, a lot of unit tests will fail in this configuration.
Once we start fixing non-determinism issues, we can gradually make this a blocker for patches.
Reviewers: davide, dblaikie, mehdi_amini, dberlin
Reviewed By: dblaikie
Subscribers: probinson, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33908
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304757 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Since LLVM_NATIVE_ARCH, LLVM_NATIVE_ASMPARSER, LLVM_NATIVE_ASMPRINTER,
LLVM_NATIVE_DISASSEMBLER, LLVM_NATIVE_TARGET, LLVM_NATIVE_TARGETINFO and
LLVM_NATIVE_TARGETMC are already defined in llvm-config.h, there seems
to be no reason to also define them in config.h. Also, I can only find
usage of these macros in files that include llvm-config.h.
So let's remove the duplicated macros from config.h.
Reviewers: chandlerc, rnk, mehdi_amini, joerg
Reviewed By: rnk
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D33881
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304714 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
VersionPrinter by default outputs information about the Host CPU
and Default target. Printing this information requires linking in
a large amount of data, such as supported target triples as C
strings, which in turn bloats the binary size.
Enable a new CMake option LLVM_VERSION_PRINTER_SHOW_HOST_TARGET_INFO
which controls printing of the host and target info. This allows
the target triple names to be dead-code stripped. This is a nice
win for LLVM clients that wish to minimize their binary size, such
as graphics drivers.
By default this is ON, so there is no change in the default behavior.
Clients who wish to suppress this printing can do so by setting this
option to off via CMake.
A test app on Linux that uses ParseCommandLineOptions() shows a binary
size reduction of 23KB (from 149K to 126K) for a Release build, and 24KB
(from 135K to 111K) in a MinSizeRel build.
Reviewers: klimek, beanz, bogner, chandlerc, compnerd
Reviewed By: compnerd
Patch by pammon (Peter Ammon) !
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30904
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300630 91177308-0d34-0410-b5e6-96231b3b80d8
On FreeBSD backtrace is not part of libc and depends on libexecinfo
being available. Instead of using manual checks we can use the builtin
CMake module FindBacktrace.cmake to detect availability of backtrace()
in a portable way.
Patch By: Alex Richardson
Differential Revision: https://reviews.llvm.org/D27143
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@300062 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to my change in r295090, which added support for
disabling these checks selectively based on setting the preprocessor
macro without relying on the Cmake setting. Swift has moved over to use
that approach, so we can clean up here and remove the Cmake setting.
https://reviews.llvm.org/D30578
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297109 91177308-0d34-0410-b5e6-96231b3b80d8
In r288754, Mehdi added a cmake option to disable enforcement of the ABI
breaking checks in the "abi-breaking.h" header. We used that when building
Swift and it works, but I think it will be better to control this with a
preprocessor macro instead of a cmake option. That will let us opt out of
the enforcement more selectively.
This change allows skipping the cmake setting if the existing preprocessor
macro is already defined. My intention here is to make this change and get
Swift to use it, and then after a few weeks, we can remove the cmake option.
I want to stage it like that to be less disruptive. I'm not aware of anyone
else using that cmake option.
Mehdi had some initial concern about the impact of using a preprocessor
macro when building with modules enabled. I don't think that will be a
problem if we set the macro on the command line with a -D option in those
contexts where we need to disable the enforcement of the checks.
https://reviews.llvm.org/D29919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295090 91177308-0d34-0410-b5e6-96231b3b80d8
It appears to be dead, and it needlessly caused me to rebuild all of
LLVM when I changed CMAKE_INSTALL_PREFIX.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293574 91177308-0d34-0410-b5e6-96231b3b80d8
Add an explicit LLVM_ENABLE_DIA_SDK option to control building support
for DIA SDK-based debugging. Control its value to match whether DIA SDK
support was found and expose it in LLVMConfig (alike LLVM_ENABLE_ZLIB).
Its value is needed for LLDB to determine whether to run tests requiring
DIA support. Currently it is obtained from llvm/Config/config.h;
however, this file is not available for standalone builds. Following
this change, LLDB will be modified to use the value from LLVMConfig.
Differential Revision: https://reviews.llvm.org/D26255
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290818 91177308-0d34-0410-b5e6-96231b3b80d8
This was also explicitly undef in CMake for some unknown reason.
Hopefully this one won't kill all the bots.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288977 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
We recently introduced a feature that enforce at link-time that the
LLVM headers used by a clients are matching the ABI setting of the
LLVM library linked to.
However for clients that are using only headers from ADT and promise
they won't call into LLVM, this is forcing to link libSupport. This
new flag is intended to provide a way to configure LLVM with this
promise for such client.
Reviewers: bob.wilson, compnerd
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D27432
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288754 91177308-0d34-0410-b5e6-96231b3b80d8
The macro LLVM_ENABLE_ABI_BREAKING_CHECKS is moved to a new header
abi-breaking.h, from llvm-config.h. Only headers that are using the
macro are including this new header.
LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.
The abi-breaking.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).
On MSVC, the pragma "detect_mismatch" is used instead.
Differential Revision: https://reviews.llvm.org/D26876
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288082 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
LLVM will define a symbol, either EnableABIBreakingChecks or
DisableABIBreakingChecks depending on the configuration setting for
LLVM_ABI_BREAKING_CHECKS.
The llvm-config.h header will add weak references to these symbols in
every clients that includes this header. This should ensure that
a mismatch triggers a link failure (or a load time failure for DSO).
On MSVC, the pragma "detect_mismatch" is used instead.
Reviewers: rnk, jroelofs
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D26841
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287352 91177308-0d34-0410-b5e6-96231b3b80d8
