Files
archived-llvm/include/llvm/IR/ConstantRange.h
Nikita Popov 13a908d7ff [ConstantRange] Add sdiv() support
The implementation is conceptually simple: We separate the LHS and
RHS into positive and negative components and then also compute the
positive and negative components of the result, taking into account
that e.g. only pos/pos and neg/neg will give a positive result.

However, there's one significant complication: SignedMin / -1 is UB
for sdiv, and we can't just ignore it, because the APInt result of
SignedMin would break the sign segregation. Instead we drop SignedMin
or -1 from the corresponding ranges, taking into account some edge
cases with wrapped ranges.

Because of the sign segregation, the implementation ends up being
nearly fully precise even for wrapped ranges (the remaining
imprecision is due to ranges that are both signed and unsigned
wrapping and are divided by a trivial divisor like 1). This means
that the testing cannot just check the signed envelope as we
usually do. Instead we collect all possible results in a bitvector
and construct a better sign wrapped range (than the full envelope).

Differential Revision: https://reviews.llvm.org/D61238

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@362430 91177308-0d34-0410-b5e6-96231b3b80d8
2019-06-03 18:19:54 +00:00

472 lines
20 KiB
C++

//===- ConstantRange.h - Represent a range ----------------------*- C++ -*-===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// Represent a range of possible values that may occur when the program is run
// for an integral value. This keeps track of a lower and upper bound for the
// constant, which MAY wrap around the end of the numeric range. To do this, it
// keeps track of a [lower, upper) bound, which specifies an interval just like
// STL iterators. When used with boolean values, the following are important
// ranges: :
//
// [F, F) = {} = Empty set
// [T, F) = {T}
// [F, T) = {F}
// [T, T) = {F, T} = Full set
//
// The other integral ranges use min/max values for special range values. For
// example, for 8-bit types, it uses:
// [0, 0) = {} = Empty set
// [255, 255) = {0..255} = Full Set
//
// Note that ConstantRange can be used to represent either signed or
// unsigned ranges.
//
//===----------------------------------------------------------------------===//
#ifndef LLVM_IR_CONSTANTRANGE_H
#define LLVM_IR_CONSTANTRANGE_H
#include "llvm/ADT/APInt.h"
#include "llvm/IR/InstrTypes.h"
#include "llvm/IR/Instruction.h"
#include "llvm/Support/Compiler.h"
#include <cstdint>
namespace llvm {
class MDNode;
class raw_ostream;
struct KnownBits;
/// This class represents a range of values.
class LLVM_NODISCARD ConstantRange {
APInt Lower, Upper;
/// Create empty constant range with same bitwidth.
ConstantRange getEmpty() const {
return ConstantRange(getBitWidth(), false);
}
/// Create full constant range with same bitwidth.
ConstantRange getFull() const {
return ConstantRange(getBitWidth(), true);
}
public:
/// Initialize a full or empty set for the specified bit width.
explicit ConstantRange(uint32_t BitWidth, bool isFullSet);
/// Initialize a range to hold the single specified value.
ConstantRange(APInt Value);
/// Initialize a range of values explicitly. This will assert out if
/// Lower==Upper and Lower != Min or Max value for its type. It will also
/// assert out if the two APInt's are not the same bit width.
ConstantRange(APInt Lower, APInt Upper);
/// Create empty constant range with the given bit width.
static ConstantRange getEmpty(uint32_t BitWidth) {
return ConstantRange(BitWidth, false);
}
/// Create full constant range with the given bit width.
static ConstantRange getFull(uint32_t BitWidth) {
return ConstantRange(BitWidth, true);
}
/// Create non-empty constant range with the given bounds. If Lower and
/// Upper are the same, a full range is returned.
static ConstantRange getNonEmpty(APInt Lower, APInt Upper) {
if (Lower == Upper)
return getFull(Lower.getBitWidth());
return ConstantRange(std::move(Lower), std::move(Upper));
}
/// Initialize a range based on a known bits constraint. The IsSigned flag
/// indicates whether the constant range should not wrap in the signed or
/// unsigned domain.
static ConstantRange fromKnownBits(const KnownBits &Known, bool IsSigned);
/// Produce the smallest range such that all values that may satisfy the given
/// predicate with any value contained within Other is contained in the
/// returned range. Formally, this returns a superset of
/// 'union over all y in Other . { x : icmp op x y is true }'. If the exact
/// answer is not representable as a ConstantRange, the return value will be a
/// proper superset of the above.
///
/// Example: Pred = ult and Other = i8 [2, 5) returns Result = [0, 4)
static ConstantRange makeAllowedICmpRegion(CmpInst::Predicate Pred,
const ConstantRange &Other);
/// Produce the largest range such that all values in the returned range
/// satisfy the given predicate with all values contained within Other.
/// Formally, this returns a subset of
/// 'intersection over all y in Other . { x : icmp op x y is true }'. If the
/// exact answer is not representable as a ConstantRange, the return value
/// will be a proper subset of the above.
///
/// Example: Pred = ult and Other = i8 [2, 5) returns [0, 2)
static ConstantRange makeSatisfyingICmpRegion(CmpInst::Predicate Pred,
const ConstantRange &Other);
/// Produce the exact range such that all values in the returned range satisfy
/// the given predicate with any value contained within Other. Formally, this
/// returns the exact answer when the superset of 'union over all y in Other
/// is exactly same as the subset of intersection over all y in Other.
/// { x : icmp op x y is true}'.
///
/// Example: Pred = ult and Other = i8 3 returns [0, 3)
static ConstantRange makeExactICmpRegion(CmpInst::Predicate Pred,
const APInt &Other);
/// Produce the largest range containing all X such that "X BinOp Y" is
/// guaranteed not to wrap (overflow) for *all* Y in Other. However, there may
/// be *some* Y in Other for which additional X not contained in the result
/// also do not overflow.
///
/// NoWrapKind must be one of OBO::NoUnsignedWrap or OBO::NoSignedWrap.
///
/// Examples:
/// typedef OverflowingBinaryOperator OBO;
/// #define MGNR makeGuaranteedNoWrapRegion
/// MGNR(Add, [i8 1, 2), OBO::NoSignedWrap) == [-128, 127)
/// MGNR(Add, [i8 1, 2), OBO::NoUnsignedWrap) == [0, -1)
/// MGNR(Add, [i8 0, 1), OBO::NoUnsignedWrap) == Full Set
/// MGNR(Add, [i8 -1, 6), OBO::NoSignedWrap) == [INT_MIN+1, INT_MAX-4)
/// MGNR(Sub, [i8 1, 2), OBO::NoSignedWrap) == [-127, 128)
/// MGNR(Sub, [i8 1, 2), OBO::NoUnsignedWrap) == [1, 0)
static ConstantRange makeGuaranteedNoWrapRegion(Instruction::BinaryOps BinOp,
const ConstantRange &Other,
unsigned NoWrapKind);
/// Produce the range that contains X if and only if "X BinOp Other" does
/// not wrap.
static ConstantRange makeExactNoWrapRegion(Instruction::BinaryOps BinOp,
const APInt &Other,
unsigned NoWrapKind);
/// Set up \p Pred and \p RHS such that
/// ConstantRange::makeExactICmpRegion(Pred, RHS) == *this. Return true if
/// successful.
bool getEquivalentICmp(CmpInst::Predicate &Pred, APInt &RHS) const;
/// Return the lower value for this range.
const APInt &getLower() const { return Lower; }
/// Return the upper value for this range.
const APInt &getUpper() const { return Upper; }
/// Get the bit width of this ConstantRange.
uint32_t getBitWidth() const { return Lower.getBitWidth(); }
/// Return true if this set contains all of the elements possible
/// for this data-type.
bool isFullSet() const;
/// Return true if this set contains no members.
bool isEmptySet() const;
/// Return true if this set wraps around the unsigned domain. Special cases:
/// * Empty set: Not wrapped.
/// * Full set: Not wrapped.
/// * [X, 0) == [X, Max]: Not wrapped.
bool isWrappedSet() const;
/// Return true if the exclusive upper bound wraps around the unsigned
/// domain. Special cases:
/// * Empty set: Not wrapped.
/// * Full set: Not wrapped.
/// * [X, 0): Wrapped.
bool isUpperWrapped() const;
/// Return true if this set wraps around the signed domain. Special cases:
/// * Empty set: Not wrapped.
/// * Full set: Not wrapped.
/// * [X, SignedMin) == [X, SignedMax]: Not wrapped.
bool isSignWrappedSet() const;
/// Return true if the (exclusive) upper bound wraps around the signed
/// domain. Special cases:
/// * Empty set: Not wrapped.
/// * Full set: Not wrapped.
/// * [X, SignedMin): Wrapped.
bool isUpperSignWrapped() const;
/// Return true if the specified value is in the set.
bool contains(const APInt &Val) const;
/// Return true if the other range is a subset of this one.
bool contains(const ConstantRange &CR) const;
/// If this set contains a single element, return it, otherwise return null.
const APInt *getSingleElement() const {
if (Upper == Lower + 1)
return &Lower;
return nullptr;
}
/// If this set contains all but a single element, return it, otherwise return
/// null.
const APInt *getSingleMissingElement() const {
if (Lower == Upper + 1)
return &Upper;
return nullptr;
}
/// Return true if this set contains exactly one member.
bool isSingleElement() const { return getSingleElement() != nullptr; }
/// Compare set size of this range with the range CR.
bool isSizeStrictlySmallerThan(const ConstantRange &CR) const;
/// Compare set size of this range with Value.
bool isSizeLargerThan(uint64_t MaxSize) const;
/// Return true if all values in this range are negative.
bool isAllNegative() const;
/// Return true if all values in this range are non-negative.
bool isAllNonNegative() const;
/// Return the largest unsigned value contained in the ConstantRange.
APInt getUnsignedMax() const;
/// Return the smallest unsigned value contained in the ConstantRange.
APInt getUnsignedMin() const;
/// Return the largest signed value contained in the ConstantRange.
APInt getSignedMax() const;
/// Return the smallest signed value contained in the ConstantRange.
APInt getSignedMin() const;
/// Return true if this range is equal to another range.
bool operator==(const ConstantRange &CR) const {
return Lower == CR.Lower && Upper == CR.Upper;
}
bool operator!=(const ConstantRange &CR) const {
return !operator==(CR);
}
/// Subtract the specified constant from the endpoints of this constant range.
ConstantRange subtract(const APInt &CI) const;
/// Subtract the specified range from this range (aka relative complement of
/// the sets).
ConstantRange difference(const ConstantRange &CR) const;
/// If represented precisely, the result of some range operations may consist
/// of multiple disjoint ranges. As only a single range may be returned, any
/// range covering these disjoint ranges constitutes a valid result, but some
/// may be more useful than others depending on context. The preferred range
/// type specifies whether a range that is non-wrapping in the unsigned or
/// signed domain, or has the smallest size, is preferred. If a signedness is
/// preferred but all ranges are non-wrapping or all wrapping, then the
/// smallest set size is preferred. If there are multiple smallest sets, any
/// one of them may be returned.
enum PreferredRangeType { Smallest, Unsigned, Signed };
/// Return the range that results from the intersection of this range with
/// another range. If the intersection is disjoint, such that two results
/// are possible, the preferred range is determined by the PreferredRangeType.
ConstantRange intersectWith(const ConstantRange &CR,
PreferredRangeType Type = Smallest) const;
/// Return the range that results from the union of this range
/// with another range. The resultant range is guaranteed to include the
/// elements of both sets, but may contain more. For example, [3, 9) union
/// [12,15) is [3, 15), which includes 9, 10, and 11, which were not included
/// in either set before.
ConstantRange unionWith(const ConstantRange &CR,
PreferredRangeType Type = Smallest) const;
/// Return a new range representing the possible values resulting
/// from an application of the specified cast operator to this range. \p
/// BitWidth is the target bitwidth of the cast. For casts which don't
/// change bitwidth, it must be the same as the source bitwidth. For casts
/// which do change bitwidth, the bitwidth must be consistent with the
/// requested cast and source bitwidth.
ConstantRange castOp(Instruction::CastOps CastOp,
uint32_t BitWidth) const;
/// Return a new range in the specified integer type, which must
/// be strictly larger than the current type. The returned range will
/// correspond to the possible range of values if the source range had been
/// zero extended to BitWidth.
ConstantRange zeroExtend(uint32_t BitWidth) const;
/// Return a new range in the specified integer type, which must
/// be strictly larger than the current type. The returned range will
/// correspond to the possible range of values if the source range had been
/// sign extended to BitWidth.
ConstantRange signExtend(uint32_t BitWidth) const;
/// Return a new range in the specified integer type, which must be
/// strictly smaller than the current type. The returned range will
/// correspond to the possible range of values if the source range had been
/// truncated to the specified type.
ConstantRange truncate(uint32_t BitWidth) const;
/// Make this range have the bit width given by \p BitWidth. The
/// value is zero extended, truncated, or left alone to make it that width.
ConstantRange zextOrTrunc(uint32_t BitWidth) const;
/// Make this range have the bit width given by \p BitWidth. The
/// value is sign extended, truncated, or left alone to make it that width.
ConstantRange sextOrTrunc(uint32_t BitWidth) const;
/// Return a new range representing the possible values resulting
/// from an application of the specified binary operator to an left hand side
/// of this range and a right hand side of \p Other.
ConstantRange binaryOp(Instruction::BinaryOps BinOp,
const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from an addition of a value in this range and a value in \p Other.
ConstantRange add(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting from a
/// known NSW addition of a value in this range and \p Other constant.
ConstantRange addWithNoSignedWrap(const APInt &Other) const;
/// Return a new range representing the possible values resulting
/// from a subtraction of a value in this range and a value in \p Other.
ConstantRange sub(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a multiplication of a value in this range and a value in \p Other,
/// treating both this and \p Other as unsigned ranges.
ConstantRange multiply(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a signed maximum of a value in this range and a value in \p Other.
ConstantRange smax(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from an unsigned maximum of a value in this range and a value in \p Other.
ConstantRange umax(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a signed minimum of a value in this range and a value in \p Other.
ConstantRange smin(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from an unsigned minimum of a value in this range and a value in \p Other.
ConstantRange umin(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from an unsigned division of a value in this range and a value in
/// \p Other.
ConstantRange udiv(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a signed division of a value in this range and a value in
/// \p Other. Division by zero and division of SignedMin by -1 are considered
/// undefined behavior, in line with IR, and do not contribute towards the
/// result.
ConstantRange sdiv(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from an unsigned remainder operation of a value in this range and a
/// value in \p Other.
ConstantRange urem(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a signed remainder operation of a value in this range and a
/// value in \p Other.
ConstantRange srem(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a binary-and of a value in this range by a value in \p Other.
ConstantRange binaryAnd(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a binary-or of a value in this range by a value in \p Other.
ConstantRange binaryOr(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting
/// from a left shift of a value in this range by a value in \p Other.
/// TODO: This isn't fully implemented yet.
ConstantRange shl(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting from a
/// logical right shift of a value in this range and a value in \p Other.
ConstantRange lshr(const ConstantRange &Other) const;
/// Return a new range representing the possible values resulting from a
/// arithmetic right shift of a value in this range and a value in \p Other.
ConstantRange ashr(const ConstantRange &Other) const;
/// Perform an unsigned saturating addition of two constant ranges.
ConstantRange uadd_sat(const ConstantRange &Other) const;
/// Perform a signed saturating addition of two constant ranges.
ConstantRange sadd_sat(const ConstantRange &Other) const;
/// Perform an unsigned saturating subtraction of two constant ranges.
ConstantRange usub_sat(const ConstantRange &Other) const;
/// Perform a signed saturating subtraction of two constant ranges.
ConstantRange ssub_sat(const ConstantRange &Other) const;
/// Return a new range that is the logical not of the current set.
ConstantRange inverse() const;
/// Calculate absolute value range. If the original range contains signed
/// min, then the resulting range will also contain signed min.
ConstantRange abs() const;
/// Represents whether an operation on the given constant range is known to
/// always or never overflow.
enum class OverflowResult {
/// Always overflows in the direction of signed/unsigned min value.
AlwaysOverflowsLow,
/// Always overflows in the direction of signed/unsigned max value.
AlwaysOverflowsHigh,
/// May or may not overflow.
MayOverflow,
/// Never overflows.
NeverOverflows,
};
/// Return whether unsigned add of the two ranges always/never overflows.
OverflowResult unsignedAddMayOverflow(const ConstantRange &Other) const;
/// Return whether signed add of the two ranges always/never overflows.
OverflowResult signedAddMayOverflow(const ConstantRange &Other) const;
/// Return whether unsigned sub of the two ranges always/never overflows.
OverflowResult unsignedSubMayOverflow(const ConstantRange &Other) const;
/// Return whether signed sub of the two ranges always/never overflows.
OverflowResult signedSubMayOverflow(const ConstantRange &Other) const;
/// Return whether unsigned mul of the two ranges always/never overflows.
OverflowResult unsignedMulMayOverflow(const ConstantRange &Other) const;
/// Print out the bounds to a stream.
void print(raw_ostream &OS) const;
/// Allow printing from a debugger easily.
void dump() const;
};
inline raw_ostream &operator<<(raw_ostream &OS, const ConstantRange &CR) {
CR.print(OS);
return OS;
}
/// Parse out a conservative ConstantRange from !range metadata.
///
/// E.g. if RangeMD is !{i32 0, i32 10, i32 15, i32 20} then return [0, 20).
ConstantRange getConstantRangeFromMetadata(const MDNode &RangeMD);
} // end namespace llvm
#endif // LLVM_IR_CONSTANTRANGE_H