We were only doing this for basic blends, despite shuffle lowering now being good enough to handle more complex blends. This means that the two v8i16 splat shifts are performed in parallel instead of serially as the general shift case.
Reapplied with a fixed (extra null tests) version of rL336113 after reversion in rL336189 - extra test case added at rL336247.
llvm-svn: 336250
SVE overloads the AArch64 PSTATE condition flags and introduces
a set of condition code aliases for the assembler. The
details are described in section 2.2 of the architecture
reference manual supplement for SVE.
In short:
SVE alias => AArch64 name
--------------------------
NONE => EQ
ANY => NE
NLAST => HS
LAST => LO
FIRST => MI
NFRST => PL
PMORE => HI
PLAST => LS
TCONT => GE
TSTOP => LT
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48869
llvm-svn: 336245
The following code pattern:
mov %rax, %rcx
test %rax, %rax
%rax = ....
je throw_npe
mov(%rcx), %r9
mov(%rax), %r10
gets transformed into the following incorrect code after implicit null check pass:
mov %rax, %rcx
%rax = ....
faulting_load_op("movl (%rax), %r10", throw_npe)
mov(%rcx), %r9
For implicit null check pass, if the register that is checked for null value (ie, the register used in the 'test' instruction) is written into before the condition jump, we should avoid doing the optimization.
Patch by Surya Kumari Jangala!
Differential Revision: https://reviews.llvm.org/D48627
Reviewed By: skatkov
llvm-svn: 336241
D48768 may turn some of these into shifts.
Reviewers: spatel
Reviewed By: spatel
Subscribers: spatel, RKSimon, llvm-commits, craig.topper
Differential Revision: https://reviews.llvm.org/D48767
llvm-svn: 336224
This patch adds a new token type specifically for (%dx). We will now always create this token when we parse (%dx). After all operands have been parsed, if the mnemonic is in/out we'll morph this token to a regular register token. Otherwise we keep it as the special DX token which won't match any instructions.
This removes the need for passing Mnemonic through the parsing functions. It also seems closer to gas where when its used on the wrong instruction it just gets diagnosed as an invalid operand rather than a bad memory address.
llvm-svn: 336218
This might make the error message added in r335668 unneeded, but I'm not sure yet.
The check for RIP is technically unnecessary since RIP is in GR64, but that fact is kind of surprising so be explicit.
llvm-svn: 336217
As the test diffs show, the current users of getBinOpIdentity()
are InstCombine and Reassociate. SLP vectorizer is a candidate
for using this functionality too (D28907).
The InstCombine shuffle improvements are part of the planned
enhancements noted in D48830.
InstCombine actually has several other uses of getBinOpIdentity()
via SimplifyUsingDistributiveLaws(), but we don't call that for
any FP ops. Fixing that might be another part of removing the
custom reassociation in InstCombine that is only done for fadd+fmul.
llvm-svn: 336215
r336120 resulted in falling back to SelectionDAG more often due to the G_STORE
MMOs not matching the vreg size. This fixes that by explicitly any-extending the
value.
llvm-svn: 336209
Unpredicated FP-multiply of SVE vector with a vector-element given by
vector[index], for example:
fmul z0.s, z1.s, z2.s[0]
which performs an unpredicated FP-multiply of all 32-bit elements in
'z1' with the first element from 'z2'.
This patch adds restricted register classes for SVE vectors:
ZPR_3b (only z0..z7 are allowed) - for indexed vector of 16/32-bit elements.
ZPR_4b (only z0..z15 are allowed) - for indexed vector of 64-bit elements.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48823
llvm-svn: 336205
This is the last significant change suggested in PR37806:
https://bugs.llvm.org/show_bug.cgi?id=37806#c5
...though there are several follow-ups noted in the code comments
in this patch to complete this transform.
It's possible that a binop feeding a select-shuffle has been eliminated
by earlier transforms (or the code was just written like this in the 1st
place), so we'll fail to match the patterns that have 2 binops from:
D48401,
D48678,
D48662,
D48485.
In that case, we can try to materialize identity constants for the remaining
binop to fill in the "ghost" lanes of the vector (where we just want to pass
through the original values of the source operand).
I added comments to ConstantExpr::getBinOpIdentity() to show planned follow-ups.
For now, we only handle the 5 commutative integer binops (add/mul/and/or/xor).
Differential Revision: https://reviews.llvm.org/D48830
llvm-svn: 336196
With a view to support parallel operations that have their results
stored to memory, refactor the consecutive access helper out so it
could support stores instructions.
Differential Revision: https://reviews.llvm.org/D48872
llvm-svn: 336195
This adds the following system registers:
- RAS registers,
- MPAM registers,
- Activitiy monitor registers,
- Trace Extension registers,
- Timing insensitivity of data processing instructions,
- Enhanced Support for Nested Virtualization.
Differential Revision: https://reviews.llvm.org/D48871
llvm-svn: 336193
Summary:
When salvaging a dbg.declare/dbg.addr we should not add
DW_OP_stack_value to the DIExpression
(see test/Transforms/InstCombine/salvage-dbg-declare.ll).
Consider this example
%vla = alloca i32, i64 2
call void @llvm.dbg.declare(metadata i32* %vla, metadata !1, metadata !DIExpression())
Instcombine will turn it into
%vla1 = alloca [2 x i32]
%vla1.sub = getelementptr inbounds [2 x i32], [2 x i32]* %vla, i64 0, i64 0
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1.sub, metadata !19, metadata !DIExpression())
If the GEP can be eliminated, then the dbg.declare will be salvaged
and we should get
%vla1 = alloca [2 x i32]
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression())
The problem was that salvageDebugInfo did not recognize dbg.declare
as being indirect (%vla1 points to the value, it does not hold the
value), so we incorrectly got
call void @llvm.dbg.declare(metadata [2 x i32]* %vla1, metadata !19, metadata !DIExpression(DW_OP_stack_value))
I also made sure that llvm::salvageDebugInfo and
DIExpression::prependOpcodes do not add DW_OP_stack_value to
the DIExpression in case no new operands are added to the
DIExpression. That way we avoid to, unneccessarily, turn a
register location expression into an implicit location expression
in some situations (see test11 in test/Transforms/LICM/sinking.ll).
Reviewers: aprantl, vsk
Reviewed By: aprantl, vsk
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48837
llvm-svn: 336191
The signature of setRegToConstant changed in r336171, so adjust the AArch64
unit test in a similar way to how the X86 unit test was changed in that commit.
llvm-svn: 336188
The target does just enough to be able to run llvm-exegesis in latency mode for
at least some opcodes.
Differential Revision: https://reviews.llvm.org/D48780
llvm-svn: 336187
Lower more than 4 arguments using stack. This patch targets MIPS32.
It supports only functions with arguments of type i32.
Patch by Petar Avramovic.
Differential Revision: https://reviews.llvm.org/D47934
llvm-svn: 336185
unswitching loops.
Original patch trying to address this was sent in D47624, but that
didn't quite handle things correctly. There are two key principles used
to select whether and how to invalidate SCEV-cached information about
loops:
1) We must invalidate any info SCEV has cached before unswitching as we
may change (or destroy) the loop structure by the act of unswitching,
and make it hard to recover everything we want to invalidate within
SCEV.
2) We need to invalidate all of the loops whose CFGs are mutated by the
unswitching. Notably, this isn't the *entire* loop nest, this is
every loop contained by the outermost loop reached by an exit block
relevant to the unswitch.
And we need to do this even when doing trivial unswitching.
I've added more focused tests that directly check that SCEV starts off
with imprecise information and after unswitching (and simplifying
instructions) re-querying SCEV will produce precise information. These
tests also specifically work to check that an *outer* loop's information
becomes precise.
However, the testing here is still a bit imperfect. Crafting test cases
that reliably fail to be analyzed by SCEV before unswitching and succeed
afterward proved ... very, very hard. It took me several hours and
careful work to build these, and I'm not optimistic about necessarily
coming up with more to cover more elaborate possibilities. Fortunately,
the code pattern we are testing here in the pass is really
straightforward and reliable.
Thanks to Max Kazantsev for the initial work on this as well as the
review, and to Hal Finkel for helping me talk through approaches to test
this stuff even if it didn't come to much.
Differential Revision: https://reviews.llvm.org/D47624
llvm-svn: 336183
It appears that the function pointer we use there isn't reliably 4-byte
aligned. I have no idea why or how we could correct this, so for now we
just regress the Windows performance some.
Someone with access to Windows could try working on a fix. At the very
least we could use a double indirection rather than a table, but maybe
there is some way to fully restore this optimization. I don't want to
play too much with this when I don't have access to the platform and
this at least should restore the last bots.
llvm-svn: 336178
of libstdc++, not just certain versions of GCC. The original macros
broke when using Clang + libstdc++4.9 sadly.
Sadly, testing for versions of libstdc++ has been extremely problematic
in the past, so I'm just narrowing this down to Windows and when using
libc++ as that seems at least very unlikely to keep build bots broken.
llvm-svn: 336174
This patch changes order of transform in InstCombineCompares to avoid
performing transforms based on ranges which produce complex bit arithmetics
before more simple things (like folding with constants) are done. See PR37636
for the motivating example.
Differential Revision: https://reviews.llvm.org/D48584
Reviewed By: spatel, lebedev.ri
llvm-svn: 336172
Putting `sizeof(T) <= 16` into the parameter of a `std::conditional`
causes every version of MSVC I've tried to crash:
https://godbolt.org/g/eqVULL
Really frustrating, but an extra layer of indirection through an
instantiated type gives a working way to access this computed constant.
llvm-svn: 336170
Summary:
This patch is the first in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
This patch introduces the DomTreeUpdater class, which provides a cleaner API to perform updates on available dominator trees (none, only DomTree, only PostDomTree, both) using different update strategies (eagerly or lazily) to simplify the updating process.
—Prior to the patch—
- Directly calling update functions of DominatorTree updates the data structure eagerly while DeferredDominance does updates lazily.
- DeferredDominance class cannot be used when a PostDominatorTree also needs to be updated.
- Functions receiving DT/DDT need to branch a lot which is currently necessary.
- Functions using both DomTree and PostDomTree need to call the update function separately on both trees.
- People need to construct an additional DeferredDominance class to use functions only receiving DDT.
—After the patch—
Patch by Chijun Sima <simachijun@gmail.com>.
Reviewers: kuhar, brzycki, dmgreen, grosser, davide
Reviewed By: kuhar, brzycki
Author: NutshellySima
Subscribers: vsk, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D48383
llvm-svn: 336163
introducing llvm::trivially_{copy,move}_constructible type traits.
This uses a completely portable implementation of these traits provided
by Richard Smith. You can see it on compiler explorer in all its glory:
https://godbolt.org/g/QEDZjW
I have transcribed it, clang-formatted it, added some comments, and made
the tests fit into a unittest file.
I have also switched llvm::unique_function over to use these new, much
more portable traits. =D
Hopefully this will fix the build bot breakage from my prior commit.
llvm-svn: 336161
