These are necessary changes to support building LLVM for Fuchsia.
While these are not sufficient to run on Fuchsia, they are still
useful when cross-compiling LLVM libraries and runtimes for Fuchsia.
Differential Revision: https://reviews.llvm.org/D46345
llvm-svn: 331423
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
I replaced all uses of LLVM_ON_WIN32 with _WIN32 in r331127 (llvm),
r331069 (clang), r329697 (lldb), r329696 (lld), r329696 (clang-tools-extra).
If your out-of-tree program used LLVM_ON_WIN32, just use _WIN32 instead, which
is set at exactly the same time to exactly the same value.
https://reviews.llvm.org/D46264
llvm-svn: 331224
LLVM might be compiled using a toolchain file which controls the linker
to use via flags (e.g. `-B` or `-fuse-ld=`). Take these flags into
account for linker detection. We can also correct the detection by
manually passing LLVM_USE_LINKER, of course, but it seems more
convenient to have the detection take flags into account.
Differential Revision: https://reviews.llvm.org/D45464
llvm-svn: 330924
Virtually all other tablegen outputs are called .inc, not .gen, so rename these two too for consistency.
No behavior change.
https://reviews.llvm.org/D46058
llvm-svn: 330843
-stdlib=libc++ is added to both the compilation and the link flags, but
the logic for adding it was only checking if it was supported during
compilation and not linking. This could lead to false positives, for
example when using clang with libstdc++ (where the compiler would
support -stdlib=libc++ but then linking would fail because of libc++
actually being unavailable).
llvm-svn: 330761
Removes one subprocess and one temp file from the build for each tablegen
invocation.
No intended behavior change.
https://reviews.llvm.org/D45899
llvm-svn: 330742
Summary:
Due to some android peculiarities, in some build configurations
(statically linked executables targeting older releases) we could detect
the presence of these functions (because they are present in libc.a,
where check_library_exists searches), but then fail to build because the
headers did not include the definition.
This attempts to remedy that by upgrading the check_library_exists to
check_symbol_exists, which will check that the function is declared too.
I am hoping that a more thorough check will make the messy #ifdef we
have accumulated in the code obsolete, so I optimistically try to remove
them.
Reviewers: zturner, kparzysz, danalbert
Subscribers: srhines, mgorny, krytarowski, llvm-commits
Differential Revision: https://reviews.llvm.org/D45359
llvm-svn: 330251
This reverts SVN r330158.
Seems that there was a change to linker flags handling in SVN r316972.
That would alter the behaviour to correct the linker flag handling in
CMake (requiring CMake 3.4.3+). Since that is already the minimum
version required for LLVM, hard coding the knowledge of the linker is
not required, which is a strictly better solution.
llvm-svn: 330161
When building out-of-tree compilers (e.g. swift), the linker check here
may yield incorrect values. Ensure that we are using lld before we
attempt to use `--color-diagnostics` for the linker. Other linkers (i.e
bfd, gold) do not support this flag and the test can pass in some cases
and then fail subsequently when building.
llvm-svn: 330158
Summary:
[llvm-exegesis][RFC] Automatic Measurement of Instruction Latency/Uops
This is the code corresponding to the RFC "llvm-exegesis Automatic Measurement of Instruction Latency/Uops".
The RFC is available on the LLVM mailing lists as well as the following document
for easier reading:
https://docs.google.com/document/d/1QidaJMJUyQdRrFKD66vE1_N55whe0coQ3h1GpFzz27M/edit?usp=sharing
Subscribers: mgorny, gchatelet, orwant, llvm-commits
Differential Revision: https://reviews.llvm.org/D44519
llvm-svn: 329156
These used to be set in the old autoconf build, but the cmake build has had a
"TODO: actually check for these" comment since it was checked in, and they
were set to 1 on mingw unconditionally. It seems safe to say that they always
exist under mingw, so just remove them and assume they're set exactly when on
mingw (with msvc, we use `pragma comment` instead of linking these via flags).
llvm-svn: 328992
The autoconf manual: "This macro is obsolescent, as all current systems with
directory libraries have <dirent.h>. New programs need not use this macro."
llvm-svn: 328989
These should exist in all toolchains LLVM supports nowadays.
Enables making DataTypes.h a regular header instead of a .h.cmake file and
allows deleting a bunch of cmake goop (which should also speed up cmake
configure time a bit).
All the code this removes is 9+ years old.
https://reviews.llvm.org/D45155
llvm-svn: 328970
Found by looking through the output of
for f in $(grep -o '\bHAVE_[A-Z0-9_]*\b' llvm/cmake/config-ix.cmake); do
echo $f $(git grep $f '*' | wc -l);
done
in the monorepo.
llvm-svn: 328957
Summary:
As we are only doing X.0.Z releases (not using the minor version), there is no need to keep -X.Y in the version.
Like patch https://reviews.llvm.org/D41808, I propose that we rename libLLVM-7.0svn.so to libLLVM-7svn.so
This patch will also rename downstream libraries like liblldb-7.0 to liblldb-7
Reviewers: axw, beanz, dim, hans
Reviewed By: dim, hans
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41869
llvm-svn: 328768
Cmake function llvm_check_source_file_list currently only accepts paths
relative to current CMAKE_SOURCE_DIR or relative to argument SOURCE_DIR.
Extend it to accept any path, including absolute ones.
Differential revision: https://reviews.llvm.org/D44625
llvm-svn: 327912
Summary:
This is needed so that external projects (e.g. a standalone build of
lldb) can link to the LLVM shared library via the USE_SHARED argument of
llvm_config. Without this, llvm_config would add LLVM to the link list,
but then also add the constituent static libraries, resulting in
multiply defined symbols.
Reviewers: beanz, mgorny
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44391
llvm-svn: 327484
Summary: Build system changes for RISCV. Makes it possible to build just the RISCV target alone.
Reviewers: asb, apazos, mgrang, beanz
Reviewed By: asb
Subscribers: mgorny, kito-cheng, shiva0217, llvm-commits
Differential Revision: https://reviews.llvm.org/D44153
llvm-svn: 327423
Append -Wl,-rpath-link conditionally to whether GNU ld.bfd is used
rather than the Linux+!gold conditionals. Also move it out of 'else'
branch of *BSD handling. This fixes build failures with ld.bfd
on Gentoo/FreeBSD, and should cause no harm on other systems using
ld.bfd.
This patch improves the original logic by reusing results of linker
detection introduced in r307852.
Differential Revision: https://reviews.llvm.org/D43751
llvm-svn: 327007
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
This re-commit fixes a missing include of <vector> which it seems clang didn't
mind but G++ and MSVC objected to. It seems that, clang was ok with std::vector
only being forward declared at the point of use since it was fully defined
eventually but G++/MSVC both rejected it at the point of use.
llvm-svn: 326738
Despite building cleanly on my machine in three separate configs, it's failing on pretty much all bots due to missing includes among other things. Investigating.
llvm-svn: 326726
Summary:
It can be useful for tools to be able to retrieve the values of variables
declared via STATISTIC() directly without having to emit them and parse
them back. Use cases include:
* Needing to report specific statistics to a test harness
* Wanting to post-process statistics. For example, to produce a percentage of
functions that were fully selected by GlobalISel
Make this possible by adding llvm::GetStatistics() which returns an
iterator_range that can be used to inspect the statistics that have been
touched during execution. When statistics are disabled (NDEBUG and not
LLVM_ENABLE_STATISTICS) this method will return an empty range.
This patch doesn't address the effect of multiple compilations within the same
process. In such situations, the statistics will be cumulative for all
compilations up to the GetStatistics() call.
Reviewers: qcolombet, rtereshin, aditya_nandakumar, bogner
Reviewed By: rtereshin, bogner
Subscribers: llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D43901
llvm-svn: 326723
Introduce the LLVM_ENABLE_PDB option so that users can request them
explicitly instead.
Add /OPT:REF and /OPT:ICF back, which /DEBUG disables by default.
Differential Revision: https://reviews.llvm.org/D43156
llvm-svn: 325296
This patch enables PDB generation for Release build, which has
slightly different optimize option with RelWithDebInfo on windows.
This helps to know slow part of Release build when profiling.
Patch by Takuto Ikuta
Differential Revision: https://reviews.llvm.org/D42632
llvm-svn: 324504
Summary:
Rename LLVM_CONFIG_EXE to LLVM_CONFIG_PATH, and avoid building it if
passed in by user. This is the same way CLANG_TABLEGEN and
LLVM_TABLEGEN are handled, e.g., when -DLLVM_OPTIMIZED_TABLEGEN=ON is
passed.
Differential Revision: https://reviews.llvm.org/D41806
llvm-svn: 323053
Include the LLVM_LIBXML2_ENABLED cache variable in LLVMConfig.cmake
in order to make it available for other LLVM packages to query. This
is necessary to fix stand-alone testing of LLD.
Differential Revision: https://reviews.llvm.org/D42252
llvm-svn: 322973
Summary:
Currently LLVM has no way to support configuring for IDE's like CLion. Like XCode and MSVC's IDE, CLion needs to see all of the headers and tablegen files in order to properly parse the sources.
This patch adds an `LLVM_ENABLE_IDE` option which can be used to configure for IDE's in general. It is used by `LLVMProcessSources.cmake` to determine if the extra source files should be added to the target.
Unfortunately because of the low level of `LLVMProcessSources.cmake`, I'm not sure where the `LLVM_ENABLE_IDE` option should live. I choose `HandleLLVMOptions.cmake` so that out-of-tree Clang builds would correctly configure the option by default.
Reviewers: beanz, mgorny, lebedev.ri
Reviewed By: beanz
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40219
llvm-svn: 322349
When cross-compiling for Windows on Unix, the built toolchain will need
to be transferred to Windows to actually run. My opinion is that the
Unix build should use symlinks, and the transfer to Windows should take
care of making those symlinks usable. E.g., I envision tarballs to be a
common form of transfer from Unix to Windows, in which case the tarball
can be created using --dereference to follow the symlinks.
The motivation here is that, when cross-compiling for Windows on Unix,
the installation will *already* create symlinks. The reason is that the
installation script will be invoked without knowing the host system, so
the `if(UNIX)` check in the installation symlink creation script will
reflect the build system rather than the host system. We could either
make the build and install trees both contain copies or both contain
symlinks, and using symlinks is a significant space saving without (in
my opinion) having any detrimental effect on the usage of the cross-
compiled toolchain on Windows.
A secondary motivation is that Windows 10 version 1703 and later finally
lift the administrator rights requirement for creating symbolic links
(if the system is in Developer Mode), which makes symlinks a lot more
practical even on Windows. Of course Unix and Windows symlinks aren't
interoperable, but symlinks for Windows toolchains is a reasonable
future direction to be going in anyway.
Differential Revision: https://reviews.llvm.org/D41314
llvm-svn: 322061
When cross-compiling, we cannot use the just built toolchain, instead
we need to use the host toolchain which we assume has a support for
targeting the selected target platform. We also need to pass the path
to the native version of llvm-config to external projects.
Differential Revision: https://reviews.llvm.org/D41678
llvm-svn: 322046
If the make program isn't in the path, the native configure will fail.
Pass CMAKE_MAKE_PROGRAM to the native configure explicitly to remedy
this, similar to what's already done for external project configuration.
Explicitly set CMAKE_MAKE_PROGRAM before the user flags so that they can
override it for the native build if they desire (though I can't fathom
why that would be useful).
llvm-svn: 322032
Some systems still don't have this module which was introduced in
version 2.0 (CentOS 7, sigh).
Differential Revision: https://reviews.llvm.org/D41611
llvm-svn: 321659
Summary:
Always respect existing CMAKE_REQUIRED_FLAGS when adding
additional ones. This is important when cross compiling where
--sysroot and -target were already added.
In particular, this is needed when cross compiling from Darwin to
Linux, since --sysroot is required to find headers and libraries.
Cmake has a similar bug in check_include_file[_cxx] where
CMAKE_REQUIRED_LIBRARIES isn't passed, which causes
try_compile to fail.
(please see https://gitlab.kitware.com/cmake/cmake/merge_requests/1620)
Reviewers: compnerd, silvas, beanz, brad.king
Reviewed By: compnerd
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D41568
llvm-svn: 321434
macOS paths usually start with /Users, which clang-cl interprets as a
macro undefine, leading to pretty much everything failing to compile.
CMake should be taught to put a -- in its compilation rules for clang-cl
(and I've been meaning to submit that upstream for a while). In the
meantime, however, and to support older CMake versions, we can just
create a custom make rules override to fix the compilation rules.
Differential Revision: https://reviews.llvm.org/D41219
llvm-svn: 320785
Newer versions of CMake (I'm on 3.10, but I believe 3.9 behaves the same
way) attempt to query the system for information about the VS 2017
install. Unfortunately, this query fails on non-Windows systems:
cmake_host_system_information does not recognize <key> VS_15_DIR
CMake isn't going to find these system libraries on non-Windows anyway
(and we were previously silencing the resultant warnings in our
cross-compilation toolchain), so it makes sense to just omit the
attempted installation entirely on non-Windows.
Differential Revision: https://reviews.llvm.org/D41220
llvm-svn: 320724
When the Windows SDK is hosted on a case-sensitive filesystem (e.g. when
compiling on Linux and not using ciopfs), we can automatically generate
a VFS overlay for headers and symlinks for libraries.
Differential Revision: https://reviews.llvm.org/D41156
llvm-svn: 320657
When cross-compiling using clang-cl 5.0 (which is currently the latest
stable release of the compiler), the default MS compatibility level is
set to VS 2013, which is too low to build LLVM. Explicitly set the
compatibility level to VS 2017 to support cross-compiling LLVM for
Windows using clang-cl 5.0. This will be a no-op when using clang-cl 6.0
and above, where the default MS compatibility level is already VS 2017.
Differential Revision: https://reviews.llvm.org/D41157
llvm-svn: 320616
CMAKE_CL_64 will never be set when cross-compiling with clang-cl, since
CMake relies on an actual VS environment in order to determine it.
Instead, use the size of a void pointer to determine the bit width of
the host compiler (and therefore the host triple), which works for both
native and cross compilation.
Note that, with the impending advent of Windows on AArch64, assuming
that a 64-bit host == x86_64 isn't correct either, but that's something
to be addressed in a follow-up.
Differential Revision: https://reviews.llvm.org/D41155
llvm-svn: 320615
r320413 triggered cmake configure failures when building with
-DLLVM_OPTIMIZED_TABLEGEN=True and with LLVM_EXPERIMENTAL_TARGETS_TO_BUILD set
(e.g. to RISCV). This is because that patch moved to passing through
LLVM_TARGETS_TO_BUILD, and at that point LLVM_EXPERIMENTAL_TARGETS_TO_BUILD
has been merged in to it. LLVM_EXPERIMENTAL_TARGETS_TO_BUILD must be also be
passed through to avoid errors like below:
-- Constructing LLVMBuild project information
CMake Error at CMakeLists.txt:682 (message):
The target `RISCV' does not exist.
It should be one of
AArch64;AMDGPU;ARM;BPF;Hexagon;Lanai;Mips;MSP430;NVPTX;PowerPC;Sparc;SystemZ;X86;XCore
-- Configuring incomplete, errors occurred!
See the thread
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20171211/509225.html
for discussion of this fix.
llvm-svn: 320556
