This adds support for the compare logical and trap (memory)
instructions that were added as part of the miscellaneous
instruction extensions feature with zEC12.
llvm-svn: 286587
This adds support for the LZRF/LZRG/LLZRGF instructions that were
added on z13, and uses them for code generation were appropriate.
SystemZDAGToDAGISel::tryRISBGZero is updated again to prefer LLZRGF
over RISBG where both would be possible.
llvm-svn: 286586
This adds support for the 31-to-64-bit zero extension instructions
LLGT and LLGTR and uses them for code generation where appropriate.
Since this operation can also be performed via RISBG, we have to
update SystemZDAGToDAGISel::tryRISBGZero so that we prefer LLGT
over RISBG in case both are possible. The patch includes some
simplification to the tryRISBGZero code; this is not intended
to cause any (further) functional change in codegen.
llvm-svn: 286585
This completes assembler / disassembler support for all BFP
instructions provided by the floating-point extensions facility.
The instructions added here are not currently used for codegen.
llvm-svn: 286285
Add several instructions that operate on the program mask
or the addressing mode. These are not really needed for
code generation under Linux, but are provided for completeness
for the assembler/disassembler.
llvm-svn: 286284
Add the 16 access registers as LLVM registers. This allows removing
a lot of special cases in the assembler and disassembler where we
were handling access registers; this can all just use the generic
register code now.
Also add a bunch of instructions to operate on access registers,
for assembler/disassembler use only. No change in code generation
intended.
llvm-svn: 286283
Rework patterns for branches, call & return instructions,
compare-and-branch, compare-and-trap, and conditional move
instructions.
In particular, simplify creation of patterns for the extended
opcodes of instructions that take a CC mask.
Also, use semantical instruction classes for all the instructions
instead of open-coding them in SystemZInstrInfo.td.
Adds a couple of the basic branch instructions (that are unused
for codegen) for the assembler/disassembler.
llvm-svn: 286263
Fixes Bug 30808.
Note that passing subtarget information to predicates seems too complicated, so gfx8-specific def smrd_offset_20 introduced.
Old gfx6/7-specific def renamed to smrd_offset_8 for clarity.
Lit tests updated.
Differential Revision: https://reviews.llvm.org/D26085
llvm-svn: 285590
LLVM currently treats the first operand of MVCK as if it were a
regular base+index+displacement address. However, it is in fact
a base+displacement combined with a length register field.
While the two might look syntactically similar, there are two
semantic differences:
- %r0 is a valid length register, even though it cannot be used
as an index register.
- In an expression with just a single register like 0(%rX), the
register is treated as base with normal addresses, while it is
treated as the length register (with an empty base) for MVCK.
Fixed by adding a new operand parser class BDRAddr and reworking
the assembler parser to distinguish between address + length
register operands and regular addresses.
llvm-svn: 285574
Most z13 vector instructions have a base form where the data type of
the operation (whether to consider the vector to be 16 bytes, 8
halfwords, 4 words, or 2 doublewords) is encoded into a mask field,
and then a set of extended mnemonics where the mask field is not
present but the data type is encoded into the mnemonic name.
Currently, LLVM only supports the type-specific forms (since those
are really the ones needed for code generation), but not the base
type-generic forms.
To complete the assembler support and make it fully compatible with
the GNU assembler, this commit adds assembler aliases for all the
base forms of the various vector instructions.
It also adds two more alias forms that are documented in the PoP:
VFPSO/VFPSODB/WFPSODB -- generic form of VFLCDB etc.
VNOT -- special variant of VNO
llvm-svn: 284586
The vfee[bhf], vfene[bhf], and vistr[bhf] assembler mnemonics are
documented in the Principles of Operation to have an optional last
operand to encode arbitrary values in a mask field.
This commit adds support for those optional operands, and cleans up
the patterns to generate vector string instruction as bit. No change
to code generation intended.
llvm-svn: 284585
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 284218
These instructions were only defined for microMIPSR6 previously. Add
definitions for MIPSR6, correct definitions for microMIPSR6, flag these
instructions as having unmodelled side effects (they disable/enable
virtual processors) and add missing disassember tests for microMIPSR6.
Reviewers: vkalintiris
Differential Review: https://reviews.llvm.org/D24291
llvm-svn: 284115
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 283334
Add rsqrt.[ds], recip.[ds] for MIPS. Correct the microMIPS definitions for
architecture support and register usage.
Reviewers: vkalintiris, zoran.jovanoic
Differential Review: https://reviews.llvm.org/D24499
llvm-svn: 282485
For compatiblity with binutils, define these instructions to take
two registers with a 16bit unsigned immediate. Both of the registers
have to be same for dahi and dati.
Reviewers: vkalintiris, dsanders, zoran.jovanovic
Differential Review: https://reviews.llvm.org/D21473
llvm-svn: 281724
dcbf has an optional hint-like field, add support for the extended form and the
associated mnemonics (dcbfl and dcbflp).
Partially fixes PR24796.
llvm-svn: 280559
Summary:
Add instruction formats E, RSI, SSd, SSE, and SSF.
Added BRXH, BRXLE, PR, MVCK, STRAG, and ECTG instructions to test out
those formats.
Reviewers: uweigand
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23179
llvm-svn: 277822
Summary:
This is one possible solution to the problem of ignoring constraints that Simon
raised in D21473 but it's a bit of a hack.
The integrated assembler currently ignores violations of the tied register
constraints when the operands involved in a tie are both present in the AsmText.
For example, 'dati $rs, $rt, $imm' with the '$rs = $rt' will silently replace
$rt with $rs. So 'dati $2, $3, 1' is processed as if the user provided
'dati $2, $2, 1' without any diagnostic being emitted.
This is difficult to solve properly because there are multiple parts of the
matcher that are silently forcing these constraints to be met. Tied operands are
rendered to instructions by cloning previously rendered operands but this is
unnecessary because the matcher was already instructed to render the operand it
would have cloned. This is also unnecessary because earlier code has already
replaced the MCParsedOperand with the one it was tied to (so the parsed input
is matched as if it were 'dati <RegIdx 2>, <RegIdx 2>, <Imm 1>'). As a result,
it looks like fixing this properly amounts to a rewrite of the tied operand
handling which affects all targets.
This patch however, merely inserts a checking hook just before the
substitution of MCParsedOperands and the Mips target overrides it. It's not
possible to accurately check the registers are the same this early (because
numeric registers haven't been bound to a register class yet) so it cheats a
bit and checks that the tokens that produced the operand are lexically
identical. This works because tied registers need to have the same register
class but it does have a flaw. It will reject 'dati $4, $a0, 1' for violating
the constraint even though $a0 ends up as the same register as $4.
Reviewers: sdardis
Subscribers: dsanders, llvm-commits, sdardis
Differential Revision: https://reviews.llvm.org/D21994
llvm-svn: 276867
The saturation instructions appeared in v6T2, with DSP extensions, but they
were being accepted / generated on any, with the new introduction of the
saturation detection in the back-end. This commit restricts the usage to
DSP-enable only cores.
Fixes PR28607.
llvm-svn: 276701
Summary: Add support for the z13 instructions LOCHI and LOCGHI which
conditionally load immediate values. Add target instruction info hooks so
that if conversion will allow predication of LHI/LGHI.
Author: RolandF
Reviewers: uweigand
Subscribers: zhanjunl
Commiting on behalf of Roland.
Differential Revision: http://reviews.llvm.org/D22117
llvm-svn: 275086
The way the named arguments for various system instructions are handled at the
moment has a few problems:
- Large-scale duplication between AArch64BaseInfo.h and AArch64BaseInfo.cpp
- That weird Mapping class that I have no idea what I was on when I thought
it was a good idea.
- Searches are performed linearly through the entire list.
- We print absolutely all registers in upper-case, even though some are
canonically mixed case (SPSel for example).
- The ARM ARM specifies sysregs in terms of 5 fields, but those are relegated
to comments in our implementation, with a slightly opaque hex value
indicating the canonical encoding LLVM will use.
This adds a new TableGen backend to produce efficiently searchable tables, and
switches AArch64 over to using that infrastructure.
llvm-svn: 274576
The backend has been around for years, it's pretty ridiculous that we can't
even use the preferred form for printing "MOV" aliases. Unfortunately, TableGen
can't handle the complex predicates when printing so it's a bunch of nasty C++.
Oh well.
llvm-svn: 272865
Support and generate Compare and Traps like CRT, CIT, etc.
Support Trap as legal DAG opcodes and generate "j .+2" for them by default.
Add support for Conditional Traps and use the If Converter to convert them into
the corresponding compare and trap opcodes.
Differential Revision: http://reviews.llvm.org/D21155
llvm-svn: 272419
Another step for unification llvm assembler/disassembler with sp3.
Besides, CodeGen output is a bit improved, thus changes in CodeGen tests.
Assembler/Disassembler tests updated/added.
Differential Revision: http://reviews.llvm.org/D20796
llvm-svn: 271900
