RPCS3/llvm
1
0
Fork 0
mirror of https://github.com/RPCS3/llvm.git synced 2024-12-14 07:31:53 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
11a12c2c07
llvm/test/CodeGen/PowerPC/vsx-ldst.ll

46 lines
2.3 KiB
LLVM
Raw Normal View History

[PowerPC] Add vec_vsx_ld and vec_vsx_st intrinsics This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for PowerPC, which provide programmer access to the lxvd2x, lxvw4x, stxvd2x, and stxvw4x instructions. New LLVM intrinsics are provided to represent these four instructions in IntrinsicsPowerPC.td. These are patterned after the similar intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these intrinsics are tied to the code gen patterns, with additional patterns to allow plain vanilla loads and stores to still generate these instructions. At -O1 and higher the intrinsics are immediately converted to loads and stores in InstCombineCalls.cpp. This will open up more optimization opportunities while still allowing the correct instructions to be generated. (Similar code exists for aligned Altivec loads and stores.) The new intrinsics are added to the code that checks for consecutive loads and stores in PPCISelLowering.cpp, as well as to PPCTargetLowering::getTgtMemIntrinsic(). There's a new test to verify the correct instructions are generated. The loads and stores tend to be reordered, so the test just counts their number. It runs at -O2, as it's not very effective to test this at -O0, when many unnecessary loads and stores are generated. I ended up having to modify vsx-fma-m.ll. It turns out this test case is slightly unreliable, but I don't know a good way to prevent problems with it. The xvmaddmdp instructions read and write the same register, which is one of the multiplicands. Commutativity allows either to be chosen. If the FMAs are reordered differently than expected by the test, the register assignment can be different as a result. Hopefully this doesn't change often. There is a companion patch for Clang. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221767 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-12 04:19:40 +00:00
; RUN: llc -mcpu=pwr8 -mattr=+vsx -O2 -mtriple=powerpc64-unknown-linux-gnu < %s > %t
; RUN: grep lxvw4x < %t | count 3
; RUN: grep lxvd2x < %t | count 3
; RUN: grep stxvw4x < %t | count 3
; RUN: grep stxvd2x < %t | count 3
[PowerPC]Update Power VSX test cases to also test fast-isel Update of some of the VSX test cases for Power to check fast-isel codegen as well as the regular codegen. http://reviews.llvm.org/D6357 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223509 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-05 20:32:05 +00:00
; RUN: llc -mcpu=pwr8 -mattr=+vsx -O0 -fast-isel=1 -mtriple=powerpc64-unknown-linux-gnu < %s > %t
; RUN: grep lxvw4x < %t | count 3
; RUN: grep lxvd2x < %t | count 3
; RUN: grep stxvw4x < %t | count 3
; RUN: grep stxvd2x < %t | count 3
[PowerPC] Add vec_vsx_ld and vec_vsx_st intrinsics This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for PowerPC, which provide programmer access to the lxvd2x, lxvw4x, stxvd2x, and stxvw4x instructions. New LLVM intrinsics are provided to represent these four instructions in IntrinsicsPowerPC.td. These are patterned after the similar intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these intrinsics are tied to the code gen patterns, with additional patterns to allow plain vanilla loads and stores to still generate these instructions. At -O1 and higher the intrinsics are immediately converted to loads and stores in InstCombineCalls.cpp. This will open up more optimization opportunities while still allowing the correct instructions to be generated. (Similar code exists for aligned Altivec loads and stores.) The new intrinsics are added to the code that checks for consecutive loads and stores in PPCISelLowering.cpp, as well as to PPCTargetLowering::getTgtMemIntrinsic(). There's a new test to verify the correct instructions are generated. The loads and stores tend to be reordered, so the test just counts their number. It runs at -O2, as it's not very effective to test this at -O0, when many unnecessary loads and stores are generated. I ended up having to modify vsx-fma-m.ll. It turns out this test case is slightly unreliable, but I don't know a good way to prevent problems with it. The xvmaddmdp instructions read and write the same register, which is one of the multiplicands. Commutativity allows either to be chosen. If the FMAs are reordered differently than expected by the test, the register assignment can be different as a result. Hopefully this doesn't change often. There is a companion patch for Clang. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221767 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-12 04:19:40 +00:00
[PowerPC 4/4] Enable little-endian support for VSX. With the foregoing three patches, VSX instructions can be used for little endian. This patch removes the restriction that prevented this, and re-enables the test cases from the first three patches. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223792 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-09 16:59:57 +00:00
; RUN: llc -mcpu=pwr8 -mattr=+vsx -O2 -mtriple=powerpc64le-unknown-linux-gnu < %s > %t
; RUN: grep lxvd2x < %t | count 6
; RUN: grep stxvd2x < %t | count 6
[PowerPC 1/4] Little-endian adjustments for VSX loads/stores This patch addresses the inherent big-endian bias in the lxvd2x, lxvw4x, stxvd2x, and stxvw4x instructions. These instructions load vector elements into registers left-to-right (with the first element loaded into the high-order bits of the register), regardless of the endian setting of the processor. However, these are the only vector memory instructions that permit unaligned storage accesses, so we want to use them for little-endian. To make this work, a lxvd2x or lxvw4x is replaced with an lxvd2x followed by an xxswapd, which swaps the doublewords. This works for lxvw4x as well as lxvd2x, because for lxvw4x on an LE system the vector elements are in LE order (right-to-left) within each doubleword. (Thus after lxvw2x of a <4 x float> the elements will appear as 1, 0, 3, 2. Following the swap, they will appear as 3, 2, 0, 1, as desired.) For stores, an stxvd2x or stxvw4x is replaced with an stxvd2x preceded by an xxswapd. Introduction of extra swap instructions provides correctness, but obviously is not ideal from a performance perspective. Future patches will address this with optimizations to remove most of the introduced swaps, which have proven effective in other implementations. The introduction of the swaps is performed during lowering of LOAD, STORE, INTRINSIC_W_CHAIN, and INTRINSIC_VOID operations. The latter are used to translate intrinsics that specify the VSX loads and stores directly into equivalent sequences for little endian. Thus code that uses vec_vsx_ld and vec_vsx_st does not have to be modified to be ported from BE to LE. We introduce new PPCISD opcodes for LXVD2X, STXVD2X, and XXSWAPD for use during this lowering step. In PPCInstrVSX.td, we add new SDType and SDNode definitions for these (PPClxvd2x, PPCstxvd2x, PPCxxswapd). These are recognized during instruction selection and mapped to the correct instructions. Several tests that were written to use -mcpu=pwr7 or pwr8 are modified to disable VSX on LE variants because code generation changes with this and subsequent patches in this set. I chose to include all of these in the first patch than try to rigorously sort out which tests were broken by one or another of the patches. Sorry about that. The new test vsx-ldst-builtin-le.ll, and the changes to vsx-ldst.ll, are disabled until LE support is enabled because of breakages that occur as noted in those tests. They are re-enabled in patch 4/4. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@223783 91177308-0d34-0410-b5e6-96231b3b80d8
2014-12-09 16:35:51 +00:00
[PowerPC] Add vec_vsx_ld and vec_vsx_st intrinsics This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for PowerPC, which provide programmer access to the lxvd2x, lxvw4x, stxvd2x, and stxvw4x instructions. New LLVM intrinsics are provided to represent these four instructions in IntrinsicsPowerPC.td. These are patterned after the similar intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these intrinsics are tied to the code gen patterns, with additional patterns to allow plain vanilla loads and stores to still generate these instructions. At -O1 and higher the intrinsics are immediately converted to loads and stores in InstCombineCalls.cpp. This will open up more optimization opportunities while still allowing the correct instructions to be generated. (Similar code exists for aligned Altivec loads and stores.) The new intrinsics are added to the code that checks for consecutive loads and stores in PPCISelLowering.cpp, as well as to PPCTargetLowering::getTgtMemIntrinsic(). There's a new test to verify the correct instructions are generated. The loads and stores tend to be reordered, so the test just counts their number. It runs at -O2, as it's not very effective to test this at -O0, when many unnecessary loads and stores are generated. I ended up having to modify vsx-fma-m.ll. It turns out this test case is slightly unreliable, but I don't know a good way to prevent problems with it. The xvmaddmdp instructions read and write the same register, which is one of the multiplicands. Commutativity allows either to be chosen. If the FMAs are reordered differently than expected by the test, the register assignment can be different as a result. Hopefully this doesn't change often. There is a companion patch for Clang. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221767 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-12 04:19:40 +00:00
@vsi = global <4 x i32> <i32 -1, i32 2, i32 -3, i32 4>, align 16
@vui = global <4 x i32> <i32 0, i32 1, i32 2, i32 3>, align 16
@vf = global <4 x float> <float -1.500000e+00, float 2.500000e+00, float -3.500000e+00, float 4.500000e+00>, align 16
@vsll = global <2 x i64> <i64 255, i64 -937>, align 16
@vull = global <2 x i64> <i64 1447, i64 2894>, align 16
@vd = global <2 x double> <double 3.500000e+00, double -7.500000e+00>, align 16
@res_vsi = common global <4 x i32> zeroinitializer, align 16
@res_vui = common global <4 x i32> zeroinitializer, align 16
@res_vf = common global <4 x float> zeroinitializer, align 16
@res_vsll = common global <2 x i64> zeroinitializer, align 16
@res_vull = common global <2 x i64> zeroinitializer, align 16
@res_vd = common global <2 x double> zeroinitializer, align 16
; Function Attrs: nounwind
define void @test1() {
entry:
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@230794 91177308-0d34-0410-b5e6-96231b3b80d8
2015-02-27 21:17:42 +00:00
%0 = load <4 x i32>, <4 x i32>* @vsi, align 16
%1 = load <4 x i32>, <4 x i32>* @vui, align 16
%2 = load <4 x i32>, <4 x i32>* bitcast (<4 x float>* @vf to <4 x i32>*), align 16
%3 = load <2 x double>, <2 x double>* bitcast (<2 x i64>* @vsll to <2 x double>*), align 16
%4 = load <2 x double>, <2 x double>* bitcast (<2 x i64>* @vull to <2 x double>*), align 16
%5 = load <2 x double>, <2 x double>* @vd, align 16
[PowerPC] Add vec_vsx_ld and vec_vsx_st intrinsics This patch enables the vec_vsx_ld and vec_vsx_st intrinsics for PowerPC, which provide programmer access to the lxvd2x, lxvw4x, stxvd2x, and stxvw4x instructions. New LLVM intrinsics are provided to represent these four instructions in IntrinsicsPowerPC.td. These are patterned after the similar intrinsics for lvx and stvx (Altivec). In PPCInstrVSX.td, these intrinsics are tied to the code gen patterns, with additional patterns to allow plain vanilla loads and stores to still generate these instructions. At -O1 and higher the intrinsics are immediately converted to loads and stores in InstCombineCalls.cpp. This will open up more optimization opportunities while still allowing the correct instructions to be generated. (Similar code exists for aligned Altivec loads and stores.) The new intrinsics are added to the code that checks for consecutive loads and stores in PPCISelLowering.cpp, as well as to PPCTargetLowering::getTgtMemIntrinsic(). There's a new test to verify the correct instructions are generated. The loads and stores tend to be reordered, so the test just counts their number. It runs at -O2, as it's not very effective to test this at -O0, when many unnecessary loads and stores are generated. I ended up having to modify vsx-fma-m.ll. It turns out this test case is slightly unreliable, but I don't know a good way to prevent problems with it. The xvmaddmdp instructions read and write the same register, which is one of the multiplicands. Commutativity allows either to be chosen. If the FMAs are reordered differently than expected by the test, the register assignment can be different as a result. Hopefully this doesn't change often. There is a companion patch for Clang. git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@221767 91177308-0d34-0410-b5e6-96231b3b80d8
2014-11-12 04:19:40 +00:00
store <4 x i32> %0, <4 x i32>* @res_vsi, align 16
store <4 x i32> %1, <4 x i32>* @res_vui, align 16
store <4 x i32> %2, <4 x i32>* bitcast (<4 x float>* @res_vf to <4 x i32>*), align 16
store <2 x double> %3, <2 x double>* bitcast (<2 x i64>* @res_vsll to <2 x double>*), align 16
store <2 x double> %4, <2 x double>* bitcast (<2 x i64>* @res_vull to <2 x double>*), align 16
store <2 x double> %5, <2 x double>* @res_vd, align 16
ret void
}
Reference in New Issue Copy Permalink