Auto-confed ModuleMaker.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@10215 91177308-0d34-0410-b5e6-96231b3b80d8

examples/ModuleMaker/autoconf/LICENSE.TXT

@@ -0,0 +1,24 @@
+------------------------------------------------------------------------------
+Autoconf Files
+------------------------------------------------------------------------------
+All autoconf files are licensed under the LLVM license with the following
+additions:
+
+llvm/autoconf/install-sh:
+	This script is licensed under the LLVM license, with the following
+	additional copyrights and restrictions:
+
+	Copyright 1991 by the Massachusetts Institute of Technology
+
+	Permission to use, copy, modify, distribute, and sell this software and its
+	documentation for any purpose is hereby granted without fee, provided that
+	the above copyright notice appear in all copies and that both that
+	copyright notice and this permission notice appear in supporting 
+	documentation, and that the name of M.I.T. not be used in advertising or
+	publicity pertaining to distribution of the software without specific,
+	written prior permission.  M.I.T. makes no representations about the
+	suitability of this software for any purpose.  It is provided "as is"
+	without express or implied warranty.
+
+Please see the source files for additional copyrights.
+

examples/ModuleMaker/autoconf/configure.ac

@@ -0,0 +1,60 @@
+dnl **************************************************************************
+dnl * Initialize
+dnl **************************************************************************
+AC_INIT([[[ModuleMaker]]],[[[x.xx]]],[bugs@yourdomain])
+
+dnl Place all of the extra autoconf files into the config subdirectory
+AC_CONFIG_AUX_DIR([autoconf])
+
+dnl Configure a header file
+
+dnl Configure Makefiles
+dnl List every Makefile that exists within your source tree
+
+AC_CONFIG_MAKEFILE(Makefile)
+
+dnl **************************************************************************
+dnl * Determine which system we are building on
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Check for programs.
+dnl **************************************************************************
+
+dnl Verify that the source directory is valid
+AC_CONFIG_SRCDIR(["Makefile.common.in"])
+
+dnl **************************************************************************
+dnl * Check for libraries.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for header files.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for typedefs, structures, and compiler characteristics.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for library functions.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Enable various compile-time options
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Set the location of various third-party software packages
+dnl **************************************************************************
+
+dnl Location of LLVM source code
+AC_ARG_WITH(llvmsrc,AC_HELP_STRING([--with-llvmsrc],[Location of LLVM Source Code]),AC_SUBST(LLVM_SRC,[$withval]),AC_SUBST(LLVM_SRC,[`cd ${srcdir}/../..; pwd`]))
+
+dnl Location of LLVM object code
+AC_ARG_WITH(llvmobj,AC_HELP_STRING([--with-llvmobj],[Location of LLVM Object Code]),AC_SUBST(LLVM_OBJ,[$withval]),AC_SUBST(LLVM_OBJ,[`cd ../..; pwd`]))
+
+dnl **************************************************************************
+dnl * Create the output files
+dnl **************************************************************************
+AC_OUTPUT(Makefile.common)

examples/ModuleMaker/autoconf/install-sh

@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		:
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		:
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		:
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

examples/ModuleMaker/autoconf/mkinstalldirs

@@ -0,0 +1,101 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+	echo "mkdir $pathcomp"
+
+	mkdir "$pathcomp" || lasterr=$?
+
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
+# mkinstalldirs ends here

projects/ModuleMaker/autoconf/LICENSE.TXT

@@ -0,0 +1,24 @@
+------------------------------------------------------------------------------
+Autoconf Files
+------------------------------------------------------------------------------
+All autoconf files are licensed under the LLVM license with the following
+additions:
+
+llvm/autoconf/install-sh:
+	This script is licensed under the LLVM license, with the following
+	additional copyrights and restrictions:
+
+	Copyright 1991 by the Massachusetts Institute of Technology
+
+	Permission to use, copy, modify, distribute, and sell this software and its
+	documentation for any purpose is hereby granted without fee, provided that
+	the above copyright notice appear in all copies and that both that
+	copyright notice and this permission notice appear in supporting 
+	documentation, and that the name of M.I.T. not be used in advertising or
+	publicity pertaining to distribution of the software without specific,
+	written prior permission.  M.I.T. makes no representations about the
+	suitability of this software for any purpose.  It is provided "as is"
+	without express or implied warranty.
+
+Please see the source files for additional copyrights.
+

projects/ModuleMaker/autoconf/configure.ac

@@ -0,0 +1,60 @@
+dnl **************************************************************************
+dnl * Initialize
+dnl **************************************************************************
+AC_INIT([[[ModuleMaker]]],[[[x.xx]]],[bugs@yourdomain])
+
+dnl Place all of the extra autoconf files into the config subdirectory
+AC_CONFIG_AUX_DIR([autoconf])
+
+dnl Configure a header file
+
+dnl Configure Makefiles
+dnl List every Makefile that exists within your source tree
+
+AC_CONFIG_MAKEFILE(Makefile)
+
+dnl **************************************************************************
+dnl * Determine which system we are building on
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Check for programs.
+dnl **************************************************************************
+
+dnl Verify that the source directory is valid
+AC_CONFIG_SRCDIR(["Makefile.common.in"])
+
+dnl **************************************************************************
+dnl * Check for libraries.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for header files.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for typedefs, structures, and compiler characteristics.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for library functions.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Enable various compile-time options
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Set the location of various third-party software packages
+dnl **************************************************************************
+
+dnl Location of LLVM source code
+AC_ARG_WITH(llvmsrc,AC_HELP_STRING([--with-llvmsrc],[Location of LLVM Source Code]),AC_SUBST(LLVM_SRC,[$withval]),AC_SUBST(LLVM_SRC,[`cd ${srcdir}/../..; pwd`]))
+
+dnl Location of LLVM object code
+AC_ARG_WITH(llvmobj,AC_HELP_STRING([--with-llvmobj],[Location of LLVM Object Code]),AC_SUBST(LLVM_OBJ,[$withval]),AC_SUBST(LLVM_OBJ,[`cd ../..; pwd`]))
+
+dnl **************************************************************************
+dnl * Create the output files
+dnl **************************************************************************
+AC_OUTPUT(Makefile.common)

projects/ModuleMaker/autoconf/install-sh

@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		:
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		:
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		:
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

projects/ModuleMaker/autoconf/mkinstalldirs

@@ -0,0 +1,101 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+	echo "mkdir $pathcomp"
+
+	mkdir "$pathcomp" || lasterr=$?
+
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
+# mkinstalldirs ends here

projects/SmallExamples/ModuleMaker/autoconf/LICENSE.TXT

@@ -0,0 +1,24 @@
+------------------------------------------------------------------------------
+Autoconf Files
+------------------------------------------------------------------------------
+All autoconf files are licensed under the LLVM license with the following
+additions:
+
+llvm/autoconf/install-sh:
+	This script is licensed under the LLVM license, with the following
+	additional copyrights and restrictions:
+
+	Copyright 1991 by the Massachusetts Institute of Technology
+
+	Permission to use, copy, modify, distribute, and sell this software and its
+	documentation for any purpose is hereby granted without fee, provided that
+	the above copyright notice appear in all copies and that both that
+	copyright notice and this permission notice appear in supporting 
+	documentation, and that the name of M.I.T. not be used in advertising or
+	publicity pertaining to distribution of the software without specific,
+	written prior permission.  M.I.T. makes no representations about the
+	suitability of this software for any purpose.  It is provided "as is"
+	without express or implied warranty.
+
+Please see the source files for additional copyrights.
+

projects/SmallExamples/ModuleMaker/autoconf/configure.ac

@@ -0,0 +1,60 @@
+dnl **************************************************************************
+dnl * Initialize
+dnl **************************************************************************
+AC_INIT([[[ModuleMaker]]],[[[x.xx]]],[bugs@yourdomain])
+
+dnl Place all of the extra autoconf files into the config subdirectory
+AC_CONFIG_AUX_DIR([autoconf])
+
+dnl Configure a header file
+
+dnl Configure Makefiles
+dnl List every Makefile that exists within your source tree
+
+AC_CONFIG_MAKEFILE(Makefile)
+
+dnl **************************************************************************
+dnl * Determine which system we are building on
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Check for programs.
+dnl **************************************************************************
+
+dnl Verify that the source directory is valid
+AC_CONFIG_SRCDIR(["Makefile.common.in"])
+
+dnl **************************************************************************
+dnl * Check for libraries.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for header files.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for typedefs, structures, and compiler characteristics.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Checks for library functions.
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Enable various compile-time options
+dnl **************************************************************************
+
+dnl **************************************************************************
+dnl * Set the location of various third-party software packages
+dnl **************************************************************************
+
+dnl Location of LLVM source code
+AC_ARG_WITH(llvmsrc,AC_HELP_STRING([--with-llvmsrc],[Location of LLVM Source Code]),AC_SUBST(LLVM_SRC,[$withval]),AC_SUBST(LLVM_SRC,[`cd ${srcdir}/../..; pwd`]))
+
+dnl Location of LLVM object code
+AC_ARG_WITH(llvmobj,AC_HELP_STRING([--with-llvmobj],[Location of LLVM Object Code]),AC_SUBST(LLVM_OBJ,[$withval]),AC_SUBST(LLVM_OBJ,[`cd ../..; pwd`]))
+
+dnl **************************************************************************
+dnl * Create the output files
+dnl **************************************************************************
+AC_OUTPUT(Makefile.common)

projects/SmallExamples/ModuleMaker/autoconf/install-sh

@@ -0,0 +1,251 @@
+#!/bin/sh
+#
+# install - install a program, script, or datafile
+# This comes from X11R5 (mit/util/scripts/install.sh).
+#
+# Copyright 1991 by the Massachusetts Institute of Technology
+#
+# Permission to use, copy, modify, distribute, and sell this software and its
+# documentation for any purpose is hereby granted without fee, provided that
+# the above copyright notice appear in all copies and that both that
+# copyright notice and this permission notice appear in supporting
+# documentation, and that the name of M.I.T. not be used in advertising or
+# publicity pertaining to distribution of the software without specific,
+# written prior permission.  M.I.T. makes no representations about the
+# suitability of this software for any purpose.  It is provided "as is"
+# without express or implied warranty.
+#
+# Calling this script install-sh is preferred over install.sh, to prevent
+# `make' implicit rules from creating a file called install from it
+# when there is no Makefile.
+#
+# This script is compatible with the BSD install script, but was written
+# from scratch.  It can only install one file at a time, a restriction
+# shared with many OS's install programs.
+
+
+# set DOITPROG to echo to test this script
+
+# Don't use :- since 4.3BSD and earlier shells don't like it.
+doit="${DOITPROG-}"
+
+
+# put in absolute paths if you don't have them in your path; or use env. vars.
+
+mvprog="${MVPROG-mv}"
+cpprog="${CPPROG-cp}"
+chmodprog="${CHMODPROG-chmod}"
+chownprog="${CHOWNPROG-chown}"
+chgrpprog="${CHGRPPROG-chgrp}"
+stripprog="${STRIPPROG-strip}"
+rmprog="${RMPROG-rm}"
+mkdirprog="${MKDIRPROG-mkdir}"
+
+transformbasename=""
+transform_arg=""
+instcmd="$mvprog"
+chmodcmd="$chmodprog 0755"
+chowncmd=""
+chgrpcmd=""
+stripcmd=""
+rmcmd="$rmprog -f"
+mvcmd="$mvprog"
+src=""
+dst=""
+dir_arg=""
+
+while [ x"$1" != x ]; do
+    case $1 in
+	-c) instcmd="$cpprog"
+	    shift
+	    continue;;
+
+	-d) dir_arg=true
+	    shift
+	    continue;;
+
+	-m) chmodcmd="$chmodprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-o) chowncmd="$chownprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-g) chgrpcmd="$chgrpprog $2"
+	    shift
+	    shift
+	    continue;;
+
+	-s) stripcmd="$stripprog"
+	    shift
+	    continue;;
+
+	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
+	    shift
+	    continue;;
+
+	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
+	    shift
+	    continue;;
+
+	*)  if [ x"$src" = x ]
+	    then
+		src=$1
+	    else
+		# this colon is to work around a 386BSD /bin/sh bug
+		:
+		dst=$1
+	    fi
+	    shift
+	    continue;;
+    esac
+done
+
+if [ x"$src" = x ]
+then
+	echo "install:	no input file specified"
+	exit 1
+else
+	:
+fi
+
+if [ x"$dir_arg" != x ]; then
+	dst=$src
+	src=""
+	
+	if [ -d $dst ]; then
+		instcmd=:
+		chmodcmd=""
+	else
+		instcmd=$mkdirprog
+	fi
+else
+
+# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
+# might cause directories to be created, which would be especially bad 
+# if $src (and thus $dsttmp) contains '*'.
+
+	if [ -f $src -o -d $src ]
+	then
+		:
+	else
+		echo "install:  $src does not exist"
+		exit 1
+	fi
+	
+	if [ x"$dst" = x ]
+	then
+		echo "install:	no destination specified"
+		exit 1
+	else
+		:
+	fi
+
+# If destination is a directory, append the input filename; if your system
+# does not like double slashes in filenames, you may need to add some logic
+
+	if [ -d $dst ]
+	then
+		dst="$dst"/`basename $src`
+	else
+		:
+	fi
+fi
+
+## this sed command emulates the dirname command
+dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
+
+# Make sure that the destination directory exists.
+#  this part is taken from Noah Friedman's mkinstalldirs script
+
+# Skip lots of stat calls in the usual case.
+if [ ! -d "$dstdir" ]; then
+defaultIFS='
+	'
+IFS="${IFS-${defaultIFS}}"
+
+oIFS="${IFS}"
+# Some sh's can't handle IFS=/ for some reason.
+IFS='%'
+set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'`
+IFS="${oIFS}"
+
+pathcomp=''
+
+while [ $# -ne 0 ] ; do
+	pathcomp="${pathcomp}${1}"
+	shift
+
+	if [ ! -d "${pathcomp}" ] ;
+        then
+		$mkdirprog "${pathcomp}"
+	else
+		:
+	fi
+
+	pathcomp="${pathcomp}/"
+done
+fi
+
+if [ x"$dir_arg" != x ]
+then
+	$doit $instcmd $dst &&
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else : ; fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else : ; fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else : ; fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else : ; fi
+else
+
+# If we're going to rename the final executable, determine the name now.
+
+	if [ x"$transformarg" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		dstfile=`basename $dst $transformbasename | 
+			sed $transformarg`$transformbasename
+	fi
+
+# don't allow the sed command to completely eliminate the filename
+
+	if [ x"$dstfile" = x ] 
+	then
+		dstfile=`basename $dst`
+	else
+		:
+	fi
+
+# Make a temp file name in the proper directory.
+
+	dsttmp=$dstdir/#inst.$$#
+
+# Move or copy the file name to the temp name
+
+	$doit $instcmd $src $dsttmp &&
+
+	trap "rm -f ${dsttmp}" 0 &&
+
+# and set any options; do chmod last to preserve setuid bits
+
+# If any of these fail, we abort the whole thing.  If we want to
+# ignore errors from any of these, just make sure not to ignore
+# errors from the above "$doit $instcmd $src $dsttmp" command.
+
+	if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else :;fi &&
+	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else :;fi &&
+	if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else :;fi &&
+	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else :;fi &&
+
+# Now rename the file to the real destination.
+
+	$doit $rmcmd -f $dstdir/$dstfile &&
+	$doit $mvcmd $dsttmp $dstdir/$dstfile 
+
+fi &&
+
+
+exit 0

projects/SmallExamples/ModuleMaker/autoconf/mkinstalldirs

@@ -0,0 +1,101 @@
+#! /bin/sh
+# mkinstalldirs --- make directory hierarchy
+# Author: Noah Friedman <friedman@prep.ai.mit.edu>
+# Created: 1993-05-16
+# Public domain
+
+# $Id$
+
+errstatus=0
+dirmode=""
+
+usage="\
+Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
+
+# process command line arguments
+while test $# -gt 0 ; do
+   case "${1}" in
+     -h | --help | --h* )			# -h for help
+	echo "${usage}" 1>&2; exit 0 ;;
+     -m )					# -m PERM arg
+	shift
+	test $# -eq 0 && { echo "${usage}" 1>&2; exit 1; }
+	dirmode="${1}"
+	shift ;;
+     -- ) shift; break ;;			# stop option processing
+     -* ) echo "${usage}" 1>&2; exit 1 ;;	# unknown option
+     * )  break ;;				# first non-opt arg
+   esac
+done
+
+for file
+do
+  if test -d "$file"; then
+    shift
+  else
+    break
+  fi
+done
+
+case $# in
+0) exit 0 ;;
+esac
+
+case $dirmode in
+'')
+  if mkdir -p -- . 2>/dev/null; then
+    echo "mkdir -p -- $*"
+    exec mkdir -p -- "$@"
+  fi ;;
+*)
+  if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
+    echo "mkdir -m $dirmode -p -- $*"
+    exec mkdir -m "$dirmode" -p -- "$@"
+  fi ;;
+esac
+
+for file
+do
+   set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
+   shift
+
+   pathcomp=
+   for d
+   do
+     pathcomp="$pathcomp$d"
+     case "$pathcomp" in
+       -* ) pathcomp=./$pathcomp ;;
+     esac
+
+     if test ! -d "$pathcomp"; then
+	echo "mkdir $pathcomp"
+
+	mkdir "$pathcomp" || lasterr=$?
+
+	if test ! -d "$pathcomp"; then
+	  errstatus=$lasterr
+	else
+	  if test ! -z "$dirmode"; then
+	     echo "chmod $dirmode $pathcomp"
+
+	     lasterr=""
+	     chmod "$dirmode" "$pathcomp" || lasterr=$?
+
+	     if test ! -z "$lasterr"; then
+	       errstatus=$lasterr
+	     fi
+	  fi
+	fi
+     fi
+
+     pathcomp="$pathcomp/"
+   done
+done
+
+exit $errstatus
+
+# Local Variables:
+# mode: shell-script
+# sh-indentation: 3
+# End:
+# mkinstalldirs ends here