Convert manual insert point restores to the new RAII object.

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@191675 91177308-0d34-0410-b5e6-96231b3b80d8

include/llvm/Analysis/ScalarEvolutionExpander.h

@@ -252,8 +252,6 @@ namespace llvm {
 
     void rememberInstruction(Value *I);
 
-    void restoreInsertPoint(BasicBlock *BB, BasicBlock::iterator I);
-
     bool isNormalAddRecExprPHI(PHINode *PN, Instruction *IncV, const Loop *L);
 
     bool isExpandedAddRecExprPHI(PHINode *PN, Instruction *IncV, const Loop *L);

lib/Analysis/ScalarEvolutionExpander.cpp

@@ -177,8 +177,8 @@ Value *SCEVExpander::InsertBinop(Instruction::BinaryOps Opcode,
   }
 
   // Save the original insertion point so we can restore it when we're done.
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  DebugLoc Loc = Builder.GetInsertPoint()->getDebugLoc();
+  BuilderType::InsertPointGuard Guard(Builder);
 
   // Move the insertion point out of as many loops as we can.
   while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
@@ -192,13 +192,9 @@ Value *SCEVExpander::InsertBinop(Instruction::BinaryOps Opcode,
 
   // If we haven't found this binop, insert it.
   Instruction *BO = cast<Instruction>(Builder.CreateBinOp(Opcode, LHS, RHS));
-  BO->setDebugLoc(SaveInsertPt->getDebugLoc());
+  BO->setDebugLoc(Loc);
   rememberInstruction(BO);
 
-  // Restore the original insert point.
-  if (SaveInsertBB)
-    restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
   return BO;
 }
 
@@ -553,8 +549,7 @@ Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin,
     }
 
     // Save the original insertion point so we can restore it when we're done.
-    BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-    BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+    BuilderType::InsertPointGuard Guard(Builder);
 
     // Move the insertion point out of as many loops as we can.
     while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
@@ -570,16 +565,11 @@ Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin,
     Value *GEP = Builder.CreateGEP(V, Idx, "uglygep");
     rememberInstruction(GEP);
 
-    // Restore the original insert point.
-    if (SaveInsertBB)
-      restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
     return GEP;
   }
 
   // Save the original insertion point so we can restore it when we're done.
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  BuilderType::InsertPointGuard Guard(Builder);
 
   // Move the insertion point out of as many loops as we can.
   while (const Loop *L = SE.LI->getLoopFor(Builder.GetInsertBlock())) {
@@ -614,10 +604,6 @@ Value *SCEVExpander::expandAddToGEP(const SCEV *const *op_begin,
   Ops.push_back(SE.getUnknown(GEP));
   rememberInstruction(GEP);
 
-  // Restore the original insert point.
-  if (SaveInsertBB)
-    restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
   return expand(SE.getAddExpr(Ops));
 }
 
@@ -1081,8 +1067,7 @@ SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized,
   }
 
   // Save the original insertion point so we can restore it when we're done.
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  BuilderType::InsertPointGuard Guard(Builder);
 
   // Another AddRec may need to be recursively expanded below. For example, if
   // this AddRec is quadratic, the StepV may itself be an AddRec in this
@@ -1149,10 +1134,6 @@ SCEVExpander::getAddRecExprPHILiterally(const SCEVAddRecExpr *Normalized,
     PN->addIncoming(IncV, Pred);
   }
 
-  // Restore the original insert point.
-  if (SaveInsertBB)
-    restoreInsertPoint(SaveInsertBB, SaveInsertPt);
-
   // After expanding subexpressions, restore the PostIncLoops set so the caller
   // can ensure that IVIncrement dominates the current uses.
   PostIncLoops = SavedPostIncLoops;
@@ -1237,13 +1218,12 @@ Value *SCEVExpander::expandAddRecExprLiterally(const SCEVAddRecExpr *S) {
         !ExpandTy->isPointerTy() && Step->isNonConstantNegative();
       if (useSubtract)
         Step = SE.getNegativeSCEV(Step);
-      // Expand the step somewhere that dominates the loop header.
-      BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-      BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
-      Value *StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
-      // Restore the insertion point to the place where the caller has
-      // determined dominates all uses.
-      restoreInsertPoint(SaveInsertBB, SaveInsertPt);
+      Value *StepV;
+      {
+        // Expand the step somewhere that dominates the loop header.
+        BuilderType::InsertPointGuard Guard(Builder);
+        StepV = expandCodeFor(Step, IntTy, L->getHeader()->begin());
+      }
       Result = expandIVInc(PN, StepV, L, ExpandTy, IntTy, useSubtract);
     }
   }
@@ -1294,16 +1274,14 @@ Value *SCEVExpander::visitAddRecExpr(const SCEVAddRecExpr *S) {
       NewOps[i] = SE.getAnyExtendExpr(S->op_begin()[i], CanonicalIV->getType());
     Value *V = expand(SE.getAddRecExpr(NewOps, S->getLoop(),
                                        S->getNoWrapFlags(SCEV::FlagNW)));
-    BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-    BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
     BasicBlock::iterator NewInsertPt =
       llvm::next(BasicBlock::iterator(cast<Instruction>(V)));
+    BuilderType::InsertPointGuard Guard(Builder);
     while (isa<PHINode>(NewInsertPt) || isa<DbgInfoIntrinsic>(NewInsertPt) ||
            isa<LandingPadInst>(NewInsertPt))
       ++NewInsertPt;
     V = expandCodeFor(SE.getTruncateExpr(SE.getUnknown(V), Ty), 0,
                       NewInsertPt);
-    restoreInsertPoint(SaveInsertBB, SaveInsertPt);
     return V;
   }
 
@@ -1536,8 +1514,7 @@ Value *SCEVExpander::expand(const SCEV *S) {
   if (I != InsertedExpressions.end())
     return I->second;
 
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  BuilderType::InsertPointGuard Guard(Builder);
   Builder.SetInsertPoint(InsertPt->getParent(), InsertPt);
 
   // Expand the expression into instructions.
@@ -1550,8 +1527,6 @@ Value *SCEVExpander::expand(const SCEV *S) {
   // a postinc expansion, it could be reused by a non postinc user, but only if
   // its insertion point was already at the head of the loop.
   InsertedExpressions[std::make_pair(S, InsertPt)] = V;
-
-  restoreInsertPoint(SaveInsertBB, SaveInsertPt);
   return V;
 }
 
@@ -1562,10 +1537,6 @@ void SCEVExpander::rememberInstruction(Value *I) {
     InsertedValues.insert(I);
 }
 
-void SCEVExpander::restoreInsertPoint(BasicBlock *BB, BasicBlock::iterator I) {
-  Builder.SetInsertPoint(BB, I);
-}
-
 /// getOrInsertCanonicalInductionVariable - This method returns the
 /// canonical induction variable of the specified type for the specified
 /// loop (inserting one if there is none).  A canonical induction variable
@@ -1581,11 +1552,8 @@ SCEVExpander::getOrInsertCanonicalInductionVariable(const Loop *L,
                                    SE.getConstant(Ty, 1), L, SCEV::FlagAnyWrap);
 
   // Emit code for it.
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  BuilderType::InsertPointGuard Guard(Builder);
   PHINode *V = cast<PHINode>(expandCodeFor(H, 0, L->getHeader()->begin()));
-  if (SaveInsertBB)
-    restoreInsertPoint(SaveInsertBB, SaveInsertPt);
 
   return V;
 }

lib/Transforms/Instrumentation/BoundsChecking.cpp

@@ -80,9 +80,8 @@ BasicBlock *BoundsChecking::getTrapBB() {
     return TrapBB;
 
   Function *Fn = Inst->getParent()->getParent();
-  BasicBlock::iterator PrevInsertPoint = Builder->GetInsertPoint();
+  IRBuilder<>::InsertPointGuard Guard(*Builder);
   TrapBB = BasicBlock::Create(Fn->getContext(), "trap", Fn);
-  Builder->SetInsertPoint(TrapBB);
 
   llvm::Value *F = Intrinsic::getDeclaration(Fn->getParent(), Intrinsic::trap);
   CallInst *TrapCall = Builder->CreateCall(F);
@@ -91,7 +90,6 @@ BasicBlock *BoundsChecking::getTrapBB() {
   TrapCall->setDebugLoc(Inst->getDebugLoc());
   Builder->CreateUnreachable();
 
-  Builder->SetInsertPoint(PrevInsertPoint);
   return TrapBB;
 }
 

lib/Transforms/Utils/FlattenCFG.cpp

@@ -266,8 +266,7 @@ bool FlattenCFGOpt::FlattenParallelAndOr(BasicBlock *BB, IRBuilder<> &Builder,
   BasicBlock *CB;
   BranchInst *PBI = dyn_cast<BranchInst>(FirstCondBlock->getTerminator());
   bool Iteration = true;
-  BasicBlock *SaveInsertBB = Builder.GetInsertBlock();
-  BasicBlock::iterator SaveInsertPt = Builder.GetInsertPoint();
+  IRBuilder<>::InsertPointGuard Guard(Builder);
   Value *PC = PBI->getCondition();
 
   do {
@@ -298,7 +297,6 @@ bool FlattenCFGOpt::FlattenParallelAndOr(BasicBlock *BB, IRBuilder<> &Builder,
     new UnreachableInst(CB->getContext(), CB);
   } while (Iteration);
 
-  Builder.SetInsertPoint(SaveInsertBB, SaveInsertPt);
   DEBUG(dbgs() << "Use parallel and/or in:\n" << *FirstCondBlock);
   return true;
 }

lib/Transforms/Vectorize/LoopVectorize.cpp

@@ -1027,25 +1027,19 @@ LoopVectorizationLegality::RuntimePointerCheck::insert(ScalarEvolution *SE,
 }
 
 Value *InnerLoopVectorizer::getBroadcastInstrs(Value *V) {
-  // Save the current insertion location.
-  Instruction *Loc = Builder.GetInsertPoint();
-
   // We need to place the broadcast of invariant variables outside the loop.
   Instruction *Instr = dyn_cast<Instruction>(V);
   bool NewInstr = (Instr && Instr->getParent() == LoopVectorBody);
   bool Invariant = OrigLoop->isLoopInvariant(V) && !NewInstr;
 
   // Place the code for broadcasting invariant variables in the new preheader.
+  IRBuilder<>::InsertPointGuard Guard(Builder);
   if (Invariant)
     Builder.SetInsertPoint(LoopVectorPreHeader->getTerminator());
 
   // Broadcast the scalar into all locations in the vector.
   Value *Shuf = Builder.CreateVectorSplat(VF, V, "broadcast");
 
-  // Restore the builder insertion point.
-  if (Invariant)
-    Builder.SetInsertPoint(Loc);
-
   return Shuf;
 }