For the AMDGPU target if a MBB contains exec mask restore preamble, SplitEditor may get state when it cannot insert a spill instruction.
E.g. for a MIR
bb.100:
%1 = S_OR_SAVEEXEC_B64 %2, implicit-def $exec, implicit-def $scc, implicit $exec
and if the regalloc will try to allocate a virtreg to the physreg already assigned to virtreg %1, it should insert spill instruction before the S_OR_SAVEEXEC_B64 instruction.
But it is not possible since can generate incorrect code in terms of exec mask.
The change makes regalloc to ignore such physreg candidates.
Reviewed By: rampitec
Differential Revision: https://reviews.llvm.org/D52052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343004 91177308-0d34-0410-b5e6-96231b3b80d8
This removes the FrameAccess struct that was added to the interface
in D51537, since the PseudoValue from the MachineMemoryOperand
can be safely casted to a FixedStackPseudoSourceValue.
Reviewers: MatzeB, thegameg, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51617
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341454 91177308-0d34-0410-b5e6-96231b3b80d8
For instructions that spill/fill to and from multiple frame-indices
in a single instruction, hasStoreToStackSlot and hasLoadFromStackSlot
should return an array of accesses, rather than just the first encounter
of such an access.
This better describes FI accesses for AArch64 (paired) LDP/STP
instructions.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D51537
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341301 91177308-0d34-0410-b5e6-96231b3b80d8
trivially rematerializable.
We run into a case where machineLICM hoists a large number of live ranges
outside of a big loop because it thinks those live ranges are trivially
rematerializable. In regalloc, global splitting is tried out first for those
live ranges before they are spilled and rematerialized. Because the global
splitting algorithm is quadratic, increasing a lot of global splitting
candidates causes huge compile time increase (50s to 1400s on my local
machine when compiling a module).
However, we think for live ranges which are very large and are trivially
rematerialiable, it is better to just skip global splitting so as to save
compile time with little chance of sacrificing performance. We uses the
segment size of live range to indirectly evaluate whether the global
splitting of the live range can introduce high cost, and use an option
as a knob to adjust the size limit threshold.
Differential Revision: https://reviews.llvm.org/D49353
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@337186 91177308-0d34-0410-b5e6-96231b3b80d8
RegAlloc keeps a insertion-time ordered map of evictee information,
but we only use membership. Replace MapVector with contextually
equivalent DenseMap which is smaller and faster.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333981 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331272 91177308-0d34-0410-b5e6-96231b3b80d8
When selecting a split candidate for region splitting, the register allocator tries to predict which candidate will have the cheapest spill cost.
Global splitting may cause the creation of local intervals, and they might spill.
This patch makes RA take into account the spill cost of local split intervals in use blocks (we already take into account the spill cost in through blocks).
A flag ("-condsider-local-interval-cost") controls weather we do this advanced cost calculation (it's on by default for X86 target, off for the rest).
Differential Revision: https://reviews.llvm.org/D41585
Change-Id: Icccb8ad2dbf13124f5d97a18c67d95aa6be0d14d
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@323870 91177308-0d34-0410-b5e6-96231b3b80d8
Headers/Implementation files should be named after the class they
declare/define.
Also eliminated an `#include "llvm/CodeGen/LiveIntervalAnalysis.h"` in
favor of `class LiveIntarvals;`
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320546 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319665 91177308-0d34-0410-b5e6-96231b3b80d8
These command line options are not intended for public use, and often
don't even make sense in the context of a particular tool anyway. About
90% of them are already hidden, but when people add new options they
forget to hide them, so if you were to make a brand new tool today, link
against one of LLVM's libraries, and run tool -help you would get a
bunch of junk that doesn't make sense for the tool you're writing.
This patch hides these options. The real solution is to not have
libraries defining command line options, but that's a much larger effort
and not something I'm prepared to take on.
Differential Revision: https://reviews.llvm.org/D40674
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319505 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, avoid
printing "vreg" for virtual registers (which is one of the current MIR
possibilities).
Basically:
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/%vreg([0-9]+)/%\1/g"
* grep -nr '%vreg' . and fix if needed
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E "s/ vreg([0-9]+)/ %\1/g"
* grep -nr 'vreg[0-9]\+' . and fix if needed
Differential Revision: https://reviews.llvm.org/D40420
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319427 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319168 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317647 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes bugzilla 26810
https://bugs.llvm.org/show_bug.cgi?id=26810
This is intended to prevent sequences like:
movl %ebp, 8(%esp) # 4-byte Spill
movl %ecx, %ebp
movl %ebx, %ecx
movl %edi, %ebx
movl %edx, %edi
cltd
idivl %esi
movl %edi, %edx
movl %ebx, %edi
movl %ecx, %ebx
movl %ebp, %ecx
movl 16(%esp), %ebp # 4 - byte Reload
Such sequences are created in 2 scenarios:
Scenario #1:
vreg0 is evicted from physreg0 by vreg1
Evictee vreg0 is intended for region splitting with split candidate physreg0 (the reg vreg0 was evicted from)
Region splitting creates a local interval because of interference with the evictor vreg1 (normally region spliiting creates 2 interval, the "by reg" and "by stack" intervals. Local interval created when interference occurs.)
one of the split intervals ends up evicting vreg2 from physreg1
Evictee vreg2 is intended for region splitting with split candidate physreg1
one of the split intervals ends up evicting vreg3 from physreg2 etc.. until someone spills
Scenario #2
vreg0 is evicted from physreg0 by vreg1
vreg2 is evicted from physreg2 by vreg3 etc
Evictee vreg0 is intended for region splitting with split candidate physreg1
Region splitting creates a local interval because of interference with the evictor vreg1
one of the split intervals ends up evicting back original evictor vreg1 from physreg0 (the reg vreg0 was evicted from)
Another evictee vreg2 is intended for region splitting with split candidate physreg1
one of the split intervals ends up evicting vreg3 from physreg2 etc.. until someone spills
As compile time was a concern, I've added a flag to control weather we do cost calculations for local intervals we expect to be created (it's on by default for X86 target, off for the rest).
Differential Revision: https://reviews.llvm.org/D35816
Change-Id: Id9411ff7bbb845463d289ba2ae97737a1ee7cc39
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316295 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
If we have a non-allocated register, we allow us to try recoloring of an
already allocated and "Done" register, even if they are of the same
register class, if the non-allocated register has at least one tied def
and the allocated one has none.
It should be easier to recolor the non-tied register than the tied one, so
it might be an improvement even if they use the same regclasses.
Reviewers: qcolombet
Reviewed By: qcolombet
Subscribers: llvm-commits, MatzeB
Differential Revision: https://reviews.llvm.org/D38309
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@314388 91177308-0d34-0410-b5e6-96231b3b80d8
When removing a live-range we used to not touch them making debug
prints harder to read because the IR was not matching what the
live-ranges information was saying.
This only affects debug printing and allows to put stronger asserts in
the code (see r308906 for instance).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@311401 91177308-0d34-0410-b5e6-96231b3b80d8
We can now end up in situations where we initiate LiveIntervalUnion
queries with different SubRanges against the same register unit, so the
assert() no longer holds in all cases. Just recalculate now when we know
the cache is out of date.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296928 91177308-0d34-0410-b5e6-96231b3b80d8
- We only need the information from the base class, not the additional
details in the LiveInterval class.
- Spread more `const`
- Some code cleanup
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296684 91177308-0d34-0410-b5e6-96231b3b80d8
This allows MIR passes to emit optimization remarks with the same level
of functionality that is available to IR passes.
It also hooks up the greedy register allocator to report spills. This
allows for interesting use cases like increasing interleaving on a loop
until spilling of registers is observed.
I still need to experiment whether reporting every spill scales but this
demonstrates for now that the functionality works from llc
using -pass-remarks*=<pass>.
Differential Revision: https://reviews.llvm.org/D29004
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293110 91177308-0d34-0410-b5e6-96231b3b80d8
The previously used "names" are rather descriptions (they use multiple
words and contain spaces), use short programming language identifier
like strings for the "names" which should be used when exporting to
machine parseable formats.
Also removed a unused TimerGroup from Hexxagon.
Differential Revision: https://reviews.llvm.org/D25583
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287369 91177308-0d34-0410-b5e6-96231b3b80d8
In https://reviews.llvm.org/D25347, Geoff noticed that we still have
useless copy that we can eliminate after register allocation. At the
time the allocation is chosen for those copies, they are not useless
but, because of changes in the surrounding code, later on they might
become useless.
The Greedy allocator already has a mechanism to deal with such cases
with a late recoloring. However, we missed to record the some of the
missed hints.
This commit fixes that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287070 91177308-0d34-0410-b5e6-96231b3b80d8
About when we should move a vreg from CurrentNewVRegs to NewVRegs,
if the vreg in CurrentNewVRegs was added into RecoloringCandidate and was
evicted, it shouldn't be added to NewVRegs because its physical register
will be restored at the end of tryLastChanceRecoloring after the recoloring
failed. If the vreg in CurrentNewVRegs was not in RecoloringCandidate, i.e.
it was evicted in selectOrSplitImpl inside tryRecoloringCandidates, its
physical register will not be restored even if the recoloring failed. In
that case, we need to add the vreg to NewVRegs.
Same as r281783, the problem was seen on out-of-tree target and we didn't
have a test case that reproduce the problem with in-tree targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286259 91177308-0d34-0410-b5e6-96231b3b80d8
Relax the constraint for empty live-ranges while doing last chance
recoloring. Indeed, those live-ranges do not need an actual color to be
fond for the recoloring to work.
Empty live-range may happen as a result of splitting/spilling.
Unfortunately no test case for in-tree targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@284152 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, when allocating unspillable live ranges, we would never
attempt to split. We would always bail out and try last ditch graph
recoloring.
This patch changes this by attempting to split all live intervals before
performing recoloring.
This fixes LLVM bug PR14879.
I can't add test cases for any backends other than AVR because none of
them have small enough register classes to trigger the bug.
Reviewers: qcolombet
Subscribers: MatzeB
Differential Revision: https://reviews.llvm.org/D25070
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283838 91177308-0d34-0410-b5e6-96231b3b80d8
The core of the change is supposed to be NFC, however it also fixes
what I believe was an undefined behavior when calling:
va_start(ValueArgs, Desc);
with Desc being a StringRef.
Differential Revision: https://reviews.llvm.org/D25342
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283671 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously, when allocating unspillable live ranges, we would never
attempt to split. We would always bail out and try last ditch graph
recoloring.
This patch changes this by attempting to split all live intervals before
performing recoloring.
This fixes LLVM bug PR14879.
I can't add test cases for any backends other than AVR because none of
them have small enough register classes to trigger the bug.
Reviewers: qcolombet
Subscribers: MatzeB
Differential Revision: https://reviews.llvm.org/D25070
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@282852 91177308-0d34-0410-b5e6-96231b3b80d8
When trying to recolor a register we may split live-ranges in the
process. When we create new live-ranges we will have to process them,
but when we move a register from Assign to Split, the allocation is not
changed until the whole recoloring session is successful.
Therefore, only push the live-ranges that changed from Assign to
Split when the recoloring is successful.
Same as the previous commit, I was not able to produce a test case that
reproduce the problem with in-tree targets.
Note: The bug has been here since the recoloring scheme has been added
back in r200883 (Feb 2014).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281783 91177308-0d34-0410-b5e6-96231b3b80d8
When last chance recoloring is used, the list of NewVRegs may not be
empty when calling selectOrSplitImpl. Indeed, another coloring may have
taken place with splitting/spilling in the same recoloring session.
Relax an assertion to take this into account and adapt a condition to
act as if the NewVRegs were local to this selectOrSplitImpl instance.
Unfortunately I am unable to produce a test case for this, I was only
able to reproduce the conditions on an out-of-tree target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281782 91177308-0d34-0410-b5e6-96231b3b80d8
I want to compute the SSA property of .mir files automatically in
upcoming patches. The problem with this is that some inputs will be
reported as static single assignment with some passes claiming not to
support SSA form. In reality though those passes do not support PHI
instructions => Track the presence of PHI instructions separate from the
SSA property.
Differential Revision: https://reviews.llvm.org/D22719
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279573 91177308-0d34-0410-b5e6-96231b3b80d8
