CMPXCHG8B was introduced on i586/pentium generation.
If its not enabled, limit the atomic width to 32 bits so the AtomicExpandPass will expand to lib calls. Unclear if we should be using a different limit for other configs. The default is 1024 and experimentation shows that using an i256 atomic will cause a crash in SelectionDAG.
Differential Revision: https://reviews.llvm.org/D59576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356631 91177308-0d34-0410-b5e6-96231b3b80d8
This patch enables the following
1) AMD family 17h "znver2" tune flag (-march, -mcpu).
2) ISAs that are enabled for "znver2" architecture.
3) For the time being, it uses the znver1 scheduler model.
4) Tests are updated.
5) Scheduler descriptions are yet to be put in place.
Reviewers: craig.topper
Differential Revision: https://reviews.llvm.org/D58343
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354897 91177308-0d34-0410-b5e6-96231b3b80d8
We implicitly mark this feature as enabled when the target is 64-bits, but our detection code for -march=native didn't support it so you can't detect it on 32-bit targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353963 91177308-0d34-0410-b5e6-96231b3b80d8
JMP32 instructions has been added to eBPF ISA. They are 32-bit variants of
existing BPF conditional jump instructions, but the comparison happens on
low 32-bit sub-register only, therefore some unnecessary extensions could
be saved.
JMP32 instructions will only be available for -mcpu=v3. Host probe hook has
been updated accordingly.
JMP32 instructions will only be enabled in code-gen when -mattr=+alu32
enabled, meaning compiling the program using sub-register mode.
For JMP32 encoding, it is a new instruction class, and is using the
reserved eBPF class number 0x6.
This patch has been tested by compiling and running kernel bpf selftests
with JMP32 enabled.
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Jiong Wang <jiong.wang@netronome.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353384 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
After r341022, we more strictly check the 64bit feature in X86Subtargets constructor when a 64-bit triple is used. If we don't infer this feature for autodetected CPUs we might incorrectly report an error if the CPU name wasn't autodetected to a CPU that supports 64-bit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342914 91177308-0d34-0410-b5e6-96231b3b80d8
Re-add the feature flag for invpcid, which was removed in r294561.
Add an intrinsic, which always uses a 32 bit integer as first argument,
while the instruction actually uses a 64 bit register in 64 bit mode
for the INVPCID_TYPE argument.
Reviewers: craig.topper
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D47141
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@333255 91177308-0d34-0410-b5e6-96231b3b80d8
This patch aims to match the changes introduced in gcc by
https://gcc.gnu.org/ml/gcc-cvs/2018-04/msg00534.html. The
IBT feature definition is removed, with the IBT instructions
being freely available on all X86 targets. The shadow stack
instructions are also being made freely available, and the
use of all these CET instructions is controlled by the module
flags derived from the -fcf-protection clang option. The hasSHSTK
option remains since clang uses it to determine availability of
shadow stack instruction intrinsics, but it is no longer directly used.
Comes with a clang patch (D46881).
Patch by mike.dvoretsky
Differential Revision: https://reviews.llvm.org/D46882
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332705 91177308-0d34-0410-b5e6-96231b3b80d8
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331184 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM_ON_WIN32 is set exactly with MSVC and MinGW (but not Cygwin) in
HandleLLVMOptions.cmake, which is where _WIN32 defined too. Just use the
default macro instead of a reinvented one.
See thread "Replacing LLVM_ON_WIN32 with just _WIN32" on llvm-dev and cfe-dev.
No intended behavior change.
This moves over all uses of the macro, but doesn't remove the definition
of it in (llvm-)config.h yet.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331127 91177308-0d34-0410-b5e6-96231b3b80d8
Three new instructions:
umonitor - Sets up a linear address range to be
monitored by hardware and activates the monitor.
The address range should be a writeback memory
caching type.
umwait - A hint that allows the processor to
stop instruction execution and enter an
implementation-dependent optimized state
until occurrence of a class of events.
tpause - Directs the processor to enter an
implementation-dependent optimized state
until the TSC reaches the value in EDX:EAX.
Also modifying the description of the mfence
instruction, as the rep prefix (0xF3) was allowed
before, which would conflict with umonitor during
disassembly.
Before:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
mfence
After:
$ echo 0xf3,0x0f,0xae,0xf0 | llvm-mc -disassemble
.text
umonitor %rax
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45253
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@330462 91177308-0d34-0410-b5e6-96231b3b80d8
Hint to hardware to move the cache line containing the
address to a more distant level of the cache without
writing back to memory.
Reviewers: craig.topper, zvi
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D45256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329992 91177308-0d34-0410-b5e6-96231b3b80d8
Similar to the wbinvd instruction, except this
one does not invalidate caches. Ring 0 only.
The encoding matches a wbinvd instruction with
an F3 prefix.
Reviewers: craig.topper, zvi, ashlykov
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D43816
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329847 91177308-0d34-0410-b5e6-96231b3b80d8
I think most of the Intel Core CPUs and recent AMD CPUs are unaffected. All the CPUs that have a "subtype" should work. The ones that were broken are the ones that are a "type" with no subtypes.
Fixes PR36619.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326840 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: We probably mostly get this right due to family/model/stepping mapping to CPU names. But we should detect it explicitly.
Reviewers: RKSimon, echristo, dim, spatel
Reviewed By: dim
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43418
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325439 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a new instrinsic to support the rdpid instruction. The implementation is a bit weird because the intrinsic is defined as always returning 32-bits, but the assembler support thinks the instruction produces a 64-bit register in 64-bit mode. But really it zeros the upper 32 bits. So I had to add separate patterns where 64-bit mode uses an extract_subreg.
Differential Revision: https://reviews.llvm.org/D42205
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322910 91177308-0d34-0410-b5e6-96231b3b80d8
Shadow stack solution introduces a new stack for return addresses only.
The HW has a Shadow Stack Pointer (SSP) that points to the next return address.
If we return to a different address, an exception is triggered.
The shadow stack is managed using a series of intrinsics that are introduced in this patch as well as the new register (SSP).
The intrinsics are mapped to new instruction set that implements CET mechanism.
The patch also includes initial infrastructure support for IBT.
For more information, please see the following:
https://software.intel.com/sites/default/files/managed/4d/2a/control-flow-enforcement-technology-preview.pdf
Differential Revision: https://reviews.llvm.org/D40223
Change-Id: I4daa1f27e88176be79a4ac3b4cd26a459e88fed4
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318996 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I want to leverage this to clean up some of the code in clang. This will allow us to simplify D39521 which was trying to do some of the same.
If we accurately keep the code in Host.cpp synced with new CPUs added to compile-rt/libgcc we should be able to use this file as a proxy for what's implemented in the libraries.
The entries for the CPUs recognized by the libraries use separate macros that define additional parameters like the name for __builtin_cpu_is and an alias string for the couple cases where __builtin_cpu_is accepts two different names.
All of the macros contain an ARCHNAME that is usually the same as the __builtin_cpu_is string, but sometimes isn't. This represents the name recognized by X86.td and -march.
I'm following the precedent set by ARM and AArch64 and adding this information to lib/Support/TargetParser.cpp
Reviewers: erichkeane, echristo, asbirlea
Reviewed By: echristo
Subscribers: llvm-commits, aemerson, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39782
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317900 91177308-0d34-0410-b5e6-96231b3b80d8
