------------------------------------------------------------------------
r224425 | tomatabacu | 2014-12-17 10:56:16 +0000 (Wed, 17 Dec 2014) | 17 lines
[mips] Set GCC-compatible MIPS asssembler options before inline asm blocks.
Summary:
When generating MIPS assembly, LLVM always overrides the default assembler options by emitting the '.set noreorder', '.set nomacro' and '.set noat' directives,
while GCC uses the default options if an assembly-level function contains inline assembly code.
This becomes a problem when the code generated by LLVM is interleaved with inline assembly which assumes GCC-like assembler options (from Linux, for example).
This patch fixes these conflicts by setting the appropriate assembler options at the beginning of an inline asm block and popping them at the end.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6637
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@232083 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r230235 | dsanders | 2015-02-23 17:22:16 +0000 (Mon, 23 Feb 2015) | 16 lines
[mips] Honour -mno-odd-spreg for vector insert/extract when MSA is enabled.
Summary:
-mno-odd-spreg prohibits the use of odd-numbered single-precision floating
point registers. However, vector insert/extract was still using them when
manipulating the subregisters of an MSA register. Fixed this by ensuring
that insertion/extraction is only performed on even-numbered vector
registers when -mno-odd-spreg is given.
Reviewers: vmedic, sstankovic
Reviewed By: sstankovic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7672
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231472 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r227089 | vkalintiris | 2015-01-26 12:33:22 +0000 (Mon, 26 Jan 2015) | 15 lines
[mips] Enable arithmetic and binary operations for the i128 data type.
Summary:
This patch adds support for some operations that were missing from
128-bit integer types (add/sub/mul/sdiv/udiv... etc.). With these
changes we can support the __int128_t and __uint128_t data types
from C/C++.
Depends on D7125
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7143
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231471 91177308-0d34-0410-b5e6-96231b3b80d8
Except for the MIPS-II and MIPS-III cases since these targets were not
supported in 3.5.1.
------------------------------------------------------------------------
r227087 | vkalintiris | 2015-01-26 12:04:40 +0000 (Mon, 26 Jan 2015) | 7 lines
[mips] Add tests for bitwise binary and integer arithmetic operators.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D7125
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231469 91177308-0d34-0410-b5e6-96231b3b80d8
Only the testcase minus the MIPS-II and MIPS-IV cases have been merged.
They are required to cleanly apply a subsequent patch.
------------------------------------------------------------------------
r221686 | vkalintiris | 2014-11-11 11:43:55 +0000 (Tue, 11 Nov 2014) | 16 lines
[mips] Add preliminary support for the MIPS II target.
Summary:
This patch enables code generation for the MIPS II target. Pre-Mips32
targets don't have the MUL instruction, so we add the correspondent
pattern that uses the MULT/MFLO combination in order to retrieve the
product.
This is WIP as we don't support code generation for select nodes due to
the lack of conditional-move instructions.
Reviewers: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6150
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231468 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r225529 | dsanders | 2015-01-09 17:21:30 +0000 (Fri, 09 Jan 2015) | 18 lines
[mips] Add support for accessing $gp as a named register.
Summary:
Mips Linux uses $gp to hold a pointer to thread info structure and accesses it
with a named register. This makes this work for LLVM.
The N32 ABI doesn't quite work yet since the frontend generates incorrect IR
for this case. It neglects to truncate the 64-bit GPR to a 32-bit value before
converting to a pointer. Given correct IR (as in the testcase in this patch),
it works correctly.
Reviewers: sstankovic, vmedic, atanasyan
Reviewed By: atanasyan
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6893
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231466 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r224425 | tomatabacu | 2014-12-17 10:56:16 +0000 (Wed, 17 Dec 2014) | 17 lines
[mips] Set GCC-compatible MIPS asssembler options before inline asm blocks.
Summary:
When generating MIPS assembly, LLVM always overrides the default assembler options by emitting the '.set noreorder', '.set nomacro' and '.set noat' directives,
while GCC uses the default options if an assembly-level function contains inline assembly code.
This becomes a problem when the code generated by LLVM is interleaved with inline assembly which assumes GCC-like assembler options (from Linux, for example).
This patch fixes these conflicts by setting the appropriate assembler options at the beginning of an inline asm block and popping them at the end.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6637
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@231462 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r223148 | dsanders | 2014-12-02 20:40:27 +0000 (Tue, 02 Dec 2014) | 17 lines
[mips] Fix passing of small structures for big-endian O32.
Summary:
Like N32/N64, they must be passed in the upper bits of the register.
The new code could be merged with the existing if-statements but I've
refrained from doing this since it will make porting the O32 implementation
to tablegen harder later.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6463
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223457 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] Promote i32 arguments to i64 for the N32/N64 ABI and fix <64-bit structs...
Summary:
... and after all that refactoring, it's possible to distinguish softfloat
floating point values from integers so this patch no longer breaks softfloat to
do it.
Remove direct handling of i32's in the N32/N64 ABI by promoting them to
i64. This more closely reflects the ABI documentation and also fixes
problems with stack arguments on big-endian targets.
We now rely on signext/zeroext annotations (already generated by clang) and
the Assert[SZ]ext nodes to avoid the introduction of unnecessary sign/zero
extends.
It was not possible to convert three tests to use signext/zeroext. These tests
are bswap.ll, ctlz-v.ll, ctlz-v.ll. It's not possible to put signext on a
vector type so we just accept the sign extends here for now. These tests don't
pass the vectors the same way clang does (clang puts multiple elements in the
same argument, these map 1 element to 1 argument) so we don't need to worry too
much about it.
With this patch, all known N32/N64 bugs should be fixed and we now pass the
first 10,000 tests generated by ABITestGen.py.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6117
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223069 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] For N32/N64, structs must be passed in the upper bits of a register.
Summary:
Most structs were fixed by r218451 but those of between >32-bits and
<64-bits remained broken since they were not marked with [ASZ]ExtUpper.
This patch fixes the remaining cases by using
CCPromoteToUpperBitsInType<i64> on i64's in addition to i32 and smaller.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223024 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] Account for endianess when expanding BuildPairF64/ExtractElementF64 nodes.
Summary:
In order to support big endian targets for the BuildPairF64 nodes we
just need to swap the low/high pair registers. Additionally, for the
ExtractElementF64 nodes we have to calculate the correct stack offset
with respect to the node's register/operand that we want to extract.
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5753
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223023 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] Add CCValAssign::[ASZ]ExtUpper and CCPromoteToUpperBitsInType and handle struct's correctly on big-endian N32/N64 return values.
Summary:
The N32/N64 ABI's require that structs passed in registers are laid out
such that spilling the register with 'sd' places the struct at the lowest
address. For little endian this is trivial but for big-endian it requires
that structs are shifted into the upper bits of the register.
We also require that structs passed in registers have the 'inreg'
attribute for big-endian N32/N64 to work correctly. This is because the
tablegen-erated calling convention implementation only has access to the
lowered form of struct arguments (one or more integers of up to 64-bits
each) and is unable to determine the original type.
Reviewers: vmedic
Reviewed By: vmedic
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D5286
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223018 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] Improve robustness of some tests.
Summary:
This is done by removing some hardcoded registers like $at or expecting a single digit register to be selected.
Contains work done by Matheus Almeida.
Reviewers: matheusalmeida, dsanders
Reviewed By: dsanders
Subscribers: tomatabacu
Differential Revision: http://reviews.llvm.org/D4227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223012 91177308-0d34-0410-b5e6-96231b3b80d8
[mips] Invert the abicalls feature bit to be noabicalls so that it's possible for -mno-abicalls to take effect.
Also added the testcase that should have been in r215194.
This behaviour has surprised me a few times now. The problem is that the
generated MipsSubtarget::ParseSubtargetFeatures() contains code like this:
if ((Bits & Mips::FeatureABICalls) != 0) IsABICalls = true;
so '-abicalls' means 'leave it at the default' and '+abicalls' means 'set it to
true'. In this case, (and the similar -modd-spreg case) I'd like the code to be
IsABICalls = (Bits & Mips::FeatureABICalls) != 0;
or possibly:
if ((Bits & Mips::FeatureABICalls) != 0)
IsABICalls = true;
else
IsABICalls = false;
and preferably arrange for 'Bits & Mips::FeatureABICalls' to be true by default
(on some triples).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223011 91177308-0d34-0410-b5e6-96231b3b80d8
[mips][PR19612] Fix va_arg for big-endian mode.
Summary:
Big-endian mode was not correctly adjusting the offset for types smaller
than an ABI slot.
Fixes PR19612
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: sstankovic, llvm-commits
Differential Revision: http://reviews.llvm.org/D4556
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@223007 91177308-0d34-0410-b5e6-96231b3b80d8
------------------------------------------------------------------------
r221453 | tomatabacu | 2014-11-06 14:25:42 +0000 (Thu, 06 Nov 2014) | 17 lines
[mips] Tolerate the use of the %z inline asm operand modifier with non-immediates.
Summary:
Currently, we give an error if %z is used with non-immediates, instead of continuing as if the %z isn't there.
For example, you use the %z operand modifier along with the "Jr" constraints ("r" makes the operand a register, and "J" makes it an immediate, but only if its value is 0).
In this case, you want the compiler to print "$0" if the inline asm input operand turns out to be an immediate zero and you want it to print the register containing the operand, if it's not.
We give an error in the latter case, and we shouldn't (GCC also doesn't).
Reviewers: dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D6023
------------------------------------------------------------------------
git-svn-id: https://llvm.org/svn/llvm-project/llvm/branches/release_35@222693 91177308-0d34-0410-b5e6-96231b3b80d8
We should update the usages to all of the results;
otherwise, we might get assertion failure or SEGV during
the type legalization of ATOMIC_CMP_SWAP_WITH_SUCCESS
with two or more illegal types.
For example, in the following sequence, both i8 and i1
might be illegal in some target, e.g. armv5, mipsel, mips64el,
%0 = cmpxchg i8* %ptr, i8 %desire, i8 %new monotonic monotonic
%1 = extractvalue { i8, i1 } %0, 1
Since both i8 and i1 should be legalized, the corresponding
ATOMIC_CMP_SWAP_WITH_SUCCESS dag will be checked/replaced/updated
twice.
If we don't update the usage to *ALL* of the results in the
first round, the DAG for extractvalue might be processed earlier.
The GetPromotedInteger() will result in assertion failure,
because its operand (i.e. the success bit of cmpxchg) is not
promoted beforehand.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213569 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit this value when we need to contradict the default value. This
restores support for binutils 2.24.
When a suitable binutils has been released we can resume unconditionally
emitting .module directives. This is preferable to omitting the .module
directives since the .module directives protect against, for example,
accidentally assembling FP32 code with -mfp64 and producing an unusuable object.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213548 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit this directive when we need to contradict the default value (e.g.
-mno-odd-spreg is given) or an option changed the default value (e.g. -mfpxx
is given).
This restores support for the currently available head of binutils. However,
at this point binutils 2.24 is still not sufficient since it does not support
'.module fp=...'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@213511 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is because the FP64A the hardware will redirect 32-bit reads/writes
from/to odd-numbered registers to the upper 32-bits of the corresponding
even register. In effect, simulating FR=0 mode when FR=0 mode is not
available.
Unfortunately, we have to make the decision to avoid mfc1/mtc1 before
register allocation so we currently do this for even registers too.
FPXX has a similar requirement on 32-bit architectures that lack
mfhc1/mthc1 so this patch also handles the affected moves from the FPU for
FPXX too. Moves to the FPU were supported by an earlier commit.
Differential Revision: http://reviews.llvm.org/D4484
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212938 91177308-0d34-0410-b5e6-96231b3b80d8
enabled and mthc1 and dmtc1 are not available (e.g. on MIPS32r1)
This prevents the upper 32-bits of a double precision value from being moved to
the FPU with mtc1 to an odd-numbered FPU register. This is necessary to ensure
that the code generated executes correctly regardless of the current FPU mode.
MIPS32r2 and above continues to use mtc1/mthc1, while MIPS-IV and above continue
to use dmtc1.
Differential Revision: http://reviews.llvm.org/D4465
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When -mno-odd-spreg is in effect, 32-bit floating point values are not
permitted in odd FPU registers. The option also prohibits 32-bit and 64-bit
floating point comparison results from being written to odd registers.
This option has three purposes:
* It allows support for certain MIPS implementations such as loongson-3a that
do not allow the use of odd registers for single precision arithmetic.
* When using -mfpxx, -mno-odd-spreg is the default and this allows us to
statically check that code is compliant with the O32 FPXX ABI since mtc1/mfc1
instructions to/from odd registers are guaranteed not to appear for any
reason. Once this has been established, the user can then re-enable
-modd-spreg to regain the use of all 32 single-precision registers.
* When using -mfp64 and -mno-odd-spreg together, an O32 extension named
O32 FP64A is used as the ABI. This is intended to provide almost all
functionality of an FR=1 processor but can also be executed on a FR=0 core
with the assistance of a hardware compatibility mode which emulates FR=0
behaviour on an FR=1 processor.
* Added '.module oddspreg' and '.module nooddspreg' each of which update
the .MIPS.abiflags section appropriately
* Moved setFpABI() call inside emitDirectiveModuleFP() so that the caller
doesn't have to remember to do it.
* MipsABIFlags now calculates the flags1 and flags2 member on demand rather
than trying to maintain them in the same format they will be emitted in.
There is one portion of the -mfp64 and -mno-odd-spreg combination that is not
implemented yet. Moves to/from odd-numbered double-precision registers must not
use mtc1. I will fix this in a follow-up.
Differential Revision: http://reviews.llvm.org/D4383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
On MIPS32r6/MIPS64r6, floating point comparisons return 0 or -1 but integer
comparisons return 0 or 1.
Updated the various uses of getBooleanContents. Two simplifications had to be
disabled when float and int boolean contents differ:
- ScalarizeVecRes_VSELECT except when the kind of boolean contents is trivially
discoverable (i.e. when the condition of the VSELECT is a SETCC node).
- visitVSELECT (select C, 0, 1) -> (xor C, 1).
Come to think of it, this one could test for the common case of 'C'
being a SETCC too.
Preserved existing behaviour for all other targets and updated the affected
MIPS32r6/MIPS64r6 tests. This also fixes the pi benchmark where the 'low'
variable was counting in the wrong direction because it thought it could simply
add the result of the comparison.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, jholewinski, mcrosier, llvm-commits
Differential Revision: http://reviews.llvm.org/D4389
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212697 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This completes the change to use JALR instead of JR on MIPS32r6/MIPS64r6.
Reviewers: jkolek, vmedic, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4269
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212605 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
RET, and RET_MM have been replaced by a pseudo named PseudoReturn.
In addition a version with a 64-bit GPR named PseudoReturn64 has been
added.
Instruction selection for a return matches RetRA, which is expanded post
register allocation to PseudoReturn/PseudoReturn64. During MipsAsmPrinter,
this PseudoReturn/PseudoReturn64 are emitted as:
- (JALR64 $zero, $rs) on MIPS64r6
- (JALR $zero, $rs) on MIPS32r6
- (JR_MM $rs) on microMIPS
- (JR $rs) otherwise
On MIPS32r6/MIPS64r6, 'jr $rs' is an alias for 'jalr $zero, $rs'. To aid
development and review (specifically, to ensure all cases of jr are
updated), these aliases are temporarily named 'r6.jr' instead of 'jr'.
A follow up patch will change them back to the correct mnemonic.
Added (JALR $zero, $rs) to MipsNaClELFStreamer's definition of an indirect
jump, and removed it from its definition of a call.
Note: I haven't accounted for MIPS64 in MipsNaClELFStreamer since it's
doesn't appear to account for any MIPS64-specifics.
The return instruction created as part of eh_return expansion is now expanded
using expandRetRA() so we use the right return instruction on MIPS32r6/MIPS64r6
('jalr $zero, $rs').
Also, fixed a misuse of isABI_N64() to detect 64-bit wide registers in
expandEhReturn().
Reviewers: jkolek, vmedic, mseaborn, zoran.jovanovic, dsanders
Reviewed By: dsanders
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D4268
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212604 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The tests in this directory are intended to test a single IR instruction
with as few dependencies on other instructions as possible. The aim is to
be very confident that each LLVM-IR instruction is implemented correctly and
with the optimal sequence of instructions, as well as to make it easy to tell
what is tested, and make it easier to bring up new ISA revisions in the
future. This gives us a good foundation on which to test bigger things.
These particular tests will allow testing that MIPS32r6/MIPS64r6 generate
the correct return instruction for returns, calls, and indirect branches.
This will be a bit tricky since the assembly text is identical but the
instruction is actually different. On MIPS32r6/MIPS64r6 'jr $rs' has been
removed in favour of the equivalent 'jalr $zero, $rs'. 'jr $rs' remains as
an alias for 'jalr $zero, $rs'.
Differential Revision: http://reviews.llvm.org/D4266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@212345 91177308-0d34-0410-b5e6-96231b3b80d8
In assembly the expression a=b is parsed as an assignment, so it should be
printed as one.
This remove a truly horrible hack for producing a label with "a=.". It would
be used by codegen but would never be reached by the asm parser. Sorry I
missed this when it was first committed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211639 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patches allows non conversions like i1=i2; where both are global ints.
In addition, arithmetic and other things start to work since fast-isel will use
existing patterns for non fast-isel from tablegen files where applicable.
In addition i8, i16 will work in this limited context for assignment without the need
for sign extension (zero or signed). It does not matter how i8 or i16 are loaded (zero or sign extended)
since only the 8 or 16 relevant bits are used and clang will ask for sign extension before using them in
arithmetic. This is all made more complete in forthcoming patches.
for example:
int i, j=1, k=3;
void foo() {
i = j + k;
}
Keep in mind that this pass is not enabled right now and is an experimental pass
It can only be enabled with a hidden option to llvm of -mips-fast-isel.
Test Plan: Run test-suite, loadstore2.ll and I will run some executable tests.
Reviewers: dsanders
Subscribers: mcrosier
Differential Revision: http://reviews.llvm.org/D3856
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211061 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is no change to the restrictions, just the result register is stored
once in the encoding rather than twice. The rt field is zero in
MIPS32r6/MIPS64r6.
Depends on D4119
Reviewers: zoran.jovanovic, jkolek, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211019 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The linked-load, store-conditional operations have been re-encoded such
that have a 9-bit offset instead of the 16-bit offset they have prior to
MIPS32r6/MIPS64r6.
While implementing this, I noticed that the atomic load/store pseudos always
emit a sign extension using sll and sra. I have improved this to use seb/seh
when they are available (MIPS32r2/MIPS64r2 and above).
Depends on D4118
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There is very little difference between the big and little endian cases in
test/CodeGen/Mips/atomic.ll. Merge them together using multiple
FileCheck prefixes.
Depends on D4117
Reviewers: jkolek, zoran.jovanovic, vmedic
Reviewed By: vmedic
Differential Revision: http://reviews.llvm.org/D4118
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@211013 91177308-0d34-0410-b5e6-96231b3b80d8
Daniel Sanders