Summary:
This just seems to have been an oversight. We already supported the f64
atomic add with an explicit scope (e.g. "cta"), but not the scopeless
version.
Reviewers: tra
Subscribers: jholewinski, sanjoy, cfe-commits, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D39638
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317623 91177308-0d34-0410-b5e6-96231b3b80d8
This cl::opt has been dead for a while. It's no longer possible to run
the verifier without also verifying debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317288 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
ValueTracking was recognizing not all variations of clamp. Swapping of
true value and false value of select was added to fix this problem. The
first patch was reverted because it caused miscompile in NVPTX target.
Added corresponding test cases.
Reviewers: spatel, majnemer, efriedma, reames
Subscribers: llvm-commits, jholewinski
Differential Revision: https://reviews.llvm.org/D39240
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316795 91177308-0d34-0410-b5e6-96231b3b80d8
If particular target supports volatile memory access operations, we can
avoid AS casting to generic AS. Currently it's only enabled in NVPTX for
loads and stores that access global & shared AS.
Differential Revision: https://reviews.llvm.org/D39026
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@316495 91177308-0d34-0410-b5e6-96231b3b80d8
For now CUDA-9 is not included in the list of CUDA versions clang
searches for, so the path to CUDA-9 must be explicitly passed
via --cuda-path=.
On LLVM side NVPTX added sm_70 GPU type which bumps required
PTX version to 6.0, but otherwise is equivalent to sm_62 at the moment.
Differential Revision: https://reviews.llvm.org/D37576
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312734 91177308-0d34-0410-b5e6-96231b3b80d8
This change simplifies code that has to deal with
DIGlobalVariableExpression and mirrors how we treat DIExpressions in
debug info intrinsics. Before this change there were two ways of
representing empty expressions on globals, a nullptr and an empty
!DIExpression().
If someone needs to upgrade out-of-tree testcases:
perl -pi -e 's/(!DIGlobalVariableExpression\(var: ![0-9]*)\)/\1, expr: !DIExpression())/g' <MYTEST.ll>
will catch 95%.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@312144 91177308-0d34-0410-b5e6-96231b3b80d8
The patch adds support of i128 params lowering. The changes are quite trivial to
support i128 as a "special case" of integer type. With this patch, we lower i128
params the same way as aggregates of size 16 bytes: .param .b8 _ [16].
Currently, NVPTX can't deal with the 128 bit integers:
* in some cases because of failed assertions like
ValVTs.size() == OutVals.size() && "Bad return value decomposition"
* in other cases emitting PTX with .i128 or .u128 types (which are not valid [1])
[1] http://docs.nvidia.com/cuda/parallel-thread-execution/index.html#fundamental-types
Differential Revision: https://reviews.llvm.org/D34555
Patch by: Denys Zariaiev (denys.zariaiev@gmail.com)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@308675 91177308-0d34-0410-b5e6-96231b3b80d8
Adds loop expansions for known-size and unknown-sized memcpy calls, allowing the
target to provide the operand types through TTI callbacks. The default values
for the TTI callbacks use int8 operand types and matches the existing behaviour
if they aren't overridden by the target.
Differential revision: https://reviews.llvm.org/D32536
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307346 91177308-0d34-0410-b5e6-96231b3b80d8
The patch adds support of i128 params lowering. The changes are quite trivial to
support i128 as a "special case" of integer type. With this patch, we lower i128
params the same way as aggregates of size 16 bytes: .param .b8 _ [16].
Currently, NVPTX can't deal with the 128 bit integers:
* in some cases because of failed assertions like
ValVTs.size() == OutVals.size() && "Bad return value decomposition"
* in other cases emitting PTX with .i128 or .u128 types (which are not valid [1])
[1] http://docs.nvidia.com/cuda/parallel-thread-execution/index.html#fundamental-types
Differential Revision: https://reviews.llvm.org/D34555
Patch by: Denys Zariaiev (denys.zariaiev@gmail.com)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307326 91177308-0d34-0410-b5e6-96231b3b80d8
With fix for use-after-free errors. We can't add the new branch and
remove the old one until we are done with the Builder constructed for
the block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306937 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
I was testing using this expansion logic in other cases besides
NVPTX, and found some runtime failures due to the lack of a check
for a zero length memcpy/memset before the loop. There is already
such a check in the memmove expansion code though.
Reviewers: hfinkel
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D34707
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306541 91177308-0d34-0410-b5e6-96231b3b80d8
This also reverts follow-ups r303292 and r303298.
It broke some Chromium tests under MSan, and apparently also internal
tests at Google.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303369 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Moving LiveRangeShrink to x86 as this pass is mostly useful for archtectures with great register pressure.
Reviewers: MatzeB, qcolombet
Reviewed By: qcolombet
Subscribers: jholewinski, jyknight, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33294
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303292 91177308-0d34-0410-b5e6-96231b3b80d8
Follow up to D33147
NVPTXTargetLowering::LowerCall was trusting the default argument values.
Fixes another 17 of the NVPTX '-verify-machineinstrs with EXPENSIVE_CHECKS' errors in PR32146.
Differential Revision: https://reviews.llvm.org/D33189
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@303082 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: LiveRangeShrink pass moves instruction right after the definition with the same BB if the instruction and its operands all have more than one use. This pass is inexpensive and guarantees optimal live-range within BB.
Reviewers: davidxl, wmi, hfinkel, MatzeB, andreadb
Reviewed By: MatzeB, andreadb
Subscribers: hiraditya, jyknight, sanjoy, skatkov, gberry, jholewinski, qcolombet, javed.absar, krytarowski, atrick, spatel, RKSimon, andreadb, MatzeB, mehdi_amini, mgorny, efriedma, davide, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D32563
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@302938 91177308-0d34-0410-b5e6-96231b3b80d8
PR31088 demonstrated that we were assuming that only integers require promotion from <1 x iX> types, when in fact float types may require it as well - in this case half floats.
This patch adds support for extension/truncation for both integer and float types.
Differential Revision: https://reviews.llvm.org/D32391
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@301910 91177308-0d34-0410-b5e6-96231b3b80d8
Don't scalarize VSELECT->SETCC when operands/results needs to be widened,
or when the type of the SETCC operands are different from those of the VSELECT.
(VSELECT SETCC) and (VSELECT (AND/OR/XOR (SETCC,SETCC))) are handled.
The previous splitting of VSELECT->SETCC in DAGCombiner::visitVSELECT() is
no longer needed and has been removed.
Updated tests:
test/CodeGen/ARM/vuzp.ll
test/CodeGen/NVPTX/f16x2-instructions.ll
test/CodeGen/X86/2011-10-19-widen_vselect.ll
test/CodeGen/X86/2011-10-21-widen-cmp.ll
test/CodeGen/X86/psubus.ll
test/CodeGen/X86/vselect-pcmp.ll
Review: Eli Friedman, Simon Pilgrim
https://reviews.llvm.org/D29489
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297930 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently, when 't1: i1 = setcc t2, t3, cc' followed by 't4: i1 = xor t1, Constant:i1<-1>' is folded into 't5: i1 = setcc t2, t3 !cc', SDLoc of newly created SDValue 't5' follows SDLoc of 't4', not 't1'. However, as the opcode of newly created SDValue is 'setcc', it make more sense to take DebugLoc from 't1' than 't4'. For the code below
```
extern int bar();
extern int baz();
int foo(int x, int y) {
if (x != y)
return bar();
else
return baz();
}
```
, following is the bitcode representation of 'foo' at the end of llvm-ir level optimization:
```
define i32 @foo(i32 %x, i32 %y) !dbg !4 {
entry:
tail call void @llvm.dbg.value(metadata i32 %x, i64 0, metadata !9, metadata !11), !dbg !12
tail call void @llvm.dbg.value(metadata i32 %y, i64 0, metadata !10, metadata !11), !dbg !13
%cmp = icmp ne i32 %x, %y, !dbg !14
br i1 %cmp, label %if.then, label %if.else, !dbg !16
if.then: ; preds = %entry
%call = tail call i32 (...) @bar() #3, !dbg !17
br label %return, !dbg !18
if.else: ; preds = %entry
%call1 = tail call i32 (...) @baz() #3, !dbg !19
br label %return, !dbg !20
return: ; preds = %if.else, %if.then
%retval.0 = phi i32 [ %call, %if.then ], [ %call1, %if.else ]
ret i32 %retval.0, !dbg !21
}
!14 = !DILocation(line: 5, column: 9, scope: !15)
!16 = !DILocation(line: 5, column: 7, scope: !4)
```
As you can see, in 'entry' block, 'icmp' instruction and 'br' instruction have different debug locations. However, with current implementation, there's no distinction between debug locations of these two when they are lowered to asm instructions. This is because 'icmp' and 'br' become 'setcc' 'xor' and 'brcond' in SelectionDAG, where SDLoc of 'setcc' follows the debug location of 'icmp' but SDLOC of 'xor' and 'brcond' follows the debug location of 'br' instruction, and SDLoc of 'xor' overwrites SDLoc of 'setcc' when they are folded. This patch addresses this issue.
Reviewers: atrick, bogner, andreadb, craig.topper, aprantl
Reviewed By: andreadb
Subscribers: jlebar, mkuper, jholewinski, andreadb, llvm-commits
Differential Revision: https://reviews.llvm.org/D29813
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296825 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation for filling out these select-of-constants cases goes back to D24480,
where we discussed removing an IR fold from add(zext) --> select. And that goes back to:
https://reviews.llvm.org/rL75531https://reviews.llvm.org/rL159230
The idea is that we should always canonicalize patterns like this to a select-of-constants
in IR because that's the smallest IR and the best for value tracking. Note that we currently
do the opposite in some cases (like the cases in *this* patch). Ie, the proposed folds in
this patch already exist in InstCombine today:
https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/InstCombine/InstCombineSelect.cpp#L1151
As this patch shows, most targets generate better machine code for simple ext/add/not ops
rather than a select of constants. So the follow-up steps to make this less of a patchwork
of special-case folds and missing IR canonicalization:
1. Have DAGCombiner convert any select of constants into ext/add/not ops.
2 Have InstCombine canonicalize in the other direction (create more selects).
Differential Revision: https://reviews.llvm.org/D30180
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296137 91177308-0d34-0410-b5e6-96231b3b80d8
Original code only used vector loads/stores for explicit vector arguments.
It could also do more loads/stores than necessary (e.g v5f32 would
touch 8 f32 values). Aggregate types were loaded one element at a time,
even the vectors contained within.
This change attempts to generalize (and simplify) parameter space
loads/stores so that vector loads/stores can be used more broadly.
Functionality of the patch has been verified by compiling thrust
test suite and manually checking the differences between PTX
generated by llvm with and without the patch.
General algorithm:
* ComputePTXValueVTs() flattens input/output argument into a flat list
of scalars to load/store and returns their types and offsets.
* VectorizePTXValueVTs() uses that data to create vectorization plan
which returns an array of flags marking boundaries of vectorized
load/stores. Scalars are represented as 1-element vectors.
* Code that generates loads/stores implements a simple state machine
that constructs a vector according to the plan.
Differential Revision: https://reviews.llvm.org/D30011
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295784 91177308-0d34-0410-b5e6-96231b3b80d8
x*rsqrt(x) returns NaN for x == 0, whereas 1/rsqrt(x) returns 0, as
desired.
Verified that the particular nvptx approximate instructions here do in
fact return 0 for x = 0.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293713 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The affected transforms all implicitly use associativity of addition,
for which we usually require unsafe math to be enabled.
The "Aggressive" flag is only meant to convey information about the
performance of the fused ops relative to a fmul+fadd sequence.
Fixes Bug 31626.
Reviewers: spatel, hfinkel, mehdi_amini, arsenm, tstellarAMD
Subscribers: jholewinski, nemanjai, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D28675
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293635 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This lets us lower to sqrt.approx and rsqrt.approx under more
circumstances.
* Now we emit sqrt.approx and rsqrt.approx for calls to @llvm.sqrt.f32,
when fast-math is enabled. Previously, we only would emit it for
calls to @llvm.nvvm.sqrt.f. (With this patch we no longer emit
sqrt.approx for calls to @llvm.nvvm.sqrt.f; we rely on intcombine to
simplify llvm.nvvm.sqrt.f into llvm.sqrt.f32.)
* Now we emit the ftz version of rsqrt.approx when ftz is enabled.
Previously, we only emitted rsqrt.approx when ftz was disabled.
Reviewers: hfinkel
Subscribers: llvm-commits, tra, jholewinski
Differential Revision: https://reviews.llvm.org/D28508
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293605 91177308-0d34-0410-b5e6-96231b3b80d8
Support for barrier synchronization between a subset of threads
in a CTA through one of sixteen explicitly specified barriers.
These intrinsics are not directly exposed in CUDA but are
critical for forthcoming support of OpenMP on NVPTX GPUs.
The intrinsics allow the synchronization of an arbitrary
(multiple of 32) number of threads in a CTA at one of 16
distinct barriers. The two intrinsics added are as follows:
call void @llvm.nvvm.barrier.n(i32 10)
waits for all threads in a CTA to arrive at named barrier #10.
call void @llvm.nvvm.barrier(i32 15, i32 992)
waits for 992 threads in a CTA to arrive at barrier #15.
Detailed description of these intrinsics are available in the PTX manual.
http://docs.nvidia.com/cuda/parallel-thread-execution/#parallel-synchronization-and-communication-instructions
Reviewers: hfinkel, jlebar
Differential Revision: https://reviews.llvm.org/D17657
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293384 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change also lets us use max.{s,u}16. There's a vague warning in a
test about this maybe being less efficient, but I could not come up with
a case where the resulting SASS (sm_35 or sm_60) was different with or
without max.{s,u}16. It's true that nvcc seems to emit only
max.{s,u}32, but even ptxas 7.0 seems to have no problem generating
efficient SASS from max.{s,u}16 (the casts up to i32 and back down to
i16 seem to be implicit and nops, happening via register aliasing).
In the absence of evidence, better to have fewer special cases, emit
more straightforward code, etc. In particular, if a new GPU has 16-bit
min/max instructions, we want to be able to use them.
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28732
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292304 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Avoid an unnecessary conversion operation when using the result of
ctpop.i32 or ctpop.i16 as an i32, as in both cases the ptx instruction
we run returns an i32.
(Previously if we used the value as an i32, we'd do an unnecessary
zext+trunc.)
Reviewers: tra
Subscribers: jholewinski, llvm-commits
Differential Revision: https://reviews.llvm.org/D28721
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292302 91177308-0d34-0410-b5e6-96231b3b80d8
Justin Lebar