Revision r365061 changed a skip of debug instructions for a skip
of meta instructions. This is not safe, as IMPLICIT_DEF is classed
as a meta instruction.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@365198 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously no client of ilist traits has needed to know about transfers
of nodes within the same list, so as an optimization, ilist doesn't call
transferNodesFromList in that case. However, now there are clients that
want to use ilist traits to cache instruction ordering information to
optimize dominance queries of instructions in the same basic block.
This change updates the existing ilist traits users to detect in-list
transfers and do nothing in that case.
After this change, we can start caching instruction ordering information
in LLVM IR data structures. There are two main ways to do that:
- by putting an order integer into the Instruction class
- by maintaining order integers in a hash table on BasicBlock
I plan to implement and measure both, but I wanted to commit this change
first to enable other out of tree ilist clients to implement this
optimization as well.
Reviewers: lattner, hfinkel, chandlerc
Subscribers: hiraditya, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D57120
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351992 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
The scan was incorrectly skipping the first instruction, so a register
could appear to be dead when it was actually live. This eventually leads
to a machine verifier failure and miscompile in arm-ldst-opt.
Differential Revision: https://reviews.llvm.org/D54491
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346821 91177308-0d34-0410-b5e6-96231b3b80d8
When printing successor probabilities for a MBB, a human readable value is sometimes shown as 200.0%.
The human readable output is based on getProbabilityIterator, which returns 0xFFFFFFFF for getNumerator() and 0x80000000 for getDenominator() for unknown BranchProbability.
By using getSuccProbability as we do for the non-human readable part, we can avoid this problem.
Differential Revision: https://reviews.llvm.org/D52605
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@343297 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For the loop that used MCRegAliasIterator this should be NFC.
For the loop that previously used MCSubRegIterator we should
now detect more cases where the register is actually live out that
we previously missed.
Reviewers: MatzeB, arsenm
Reviewed By: MatzeB
Subscribers: wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D52410
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342944 91177308-0d34-0410-b5e6-96231b3b80d8
In computeRegisterLiveness, the max instructions to search
was counting dbg_value instructions, which could potentially
cause an observable codegen change from the presence of debug
info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341028 91177308-0d34-0410-b5e6-96231b3b80d8
If there is an unused def, this would previously
report that the register was live. Check for uses
first so that it is reported as dead if never used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341027 91177308-0d34-0410-b5e6-96231b3b80d8
If the end of the block is reached during the scan, check
the live ins of the successors. This was already done in the
other direction if the block entry was reached.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@341026 91177308-0d34-0410-b5e6-96231b3b80d8
Spectre variant #1 for x86.
There is a lengthy, detailed RFC thread on llvm-dev which discusses the
high level issues. High level discussion is probably best there.
I've split the design document out of this patch and will land it
separately once I update it to reflect the latest edits and updates to
the Google doc used in the RFC thread.
This patch is really just an initial step. It isn't quite ready for
prime time and is only exposed via debugging flags. It has two major
limitations currently:
1) It only supports x86-64, and only certain ABIs. Many assumptions are
currently hard-coded and need to be factored out of the code here.
2) It doesn't include any options for more fine-grained control, either
of which control flow edges are significant or which loads are
important to be hardened.
3) The code is still quite rough and the testing lighter than I'd like.
However, this is enough for people to begin using. I have had numerous
requests from people to be able to experiment with this patch to
understand the trade-offs it presents and how to use it. We would also
like to encourage work to similar effect in other toolchains.
The ARM folks are actively developing a system based on this for
AArch64. We hope to merge this with their efforts when both are far
enough along. But we also don't want to block making this available on
that effort.
Many thanks to the *numerous* people who helped along the way here. For
this patch in particular, both Eric and Craig did a ton of review to
even have confidence in it as an early, rough cut at this functionality.
Differential Revision: https://reviews.llvm.org/D44824
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@336990 91177308-0d34-0410-b5e6-96231b3b80d8
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@332240 91177308-0d34-0410-b5e6-96231b3b80d8
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331844 91177308-0d34-0410-b5e6-96231b3b80d8
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@331184 91177308-0d34-0410-b5e6-96231b3b80d8
The key idea is to lower COPY nodes populating EFLAGS by scanning the
uses of EFLAGS and introducing dedicated code to preserve the necessary
state in a GPR. In the vast majority of cases, these uses are cmovCC and
jCC instructions. For such cases, we can very easily save and restore
the necessary information by simply inserting a setCC into a GPR where
the original flags are live, and then testing that GPR directly to feed
the cmov or conditional branch.
However, things are a bit more tricky if arithmetic is using the flags.
This patch handles the vast majority of cases that seem to come up in
practice: adc, adcx, adox, rcl, and rcr; all without taking advantage of
partially preserved EFLAGS as LLVM doesn't currently model that at all.
There are a large number of operations that techinaclly observe EFLAGS
currently but shouldn't in this case -- they typically are using DF.
Currently, they will not be handled by this approach. However, I have
never seen this issue come up in practice. It is already pretty rare to
have these patterns come up in practical code with LLVM. I had to resort
to writing MIR tests to cover most of the logic in this pass already.
I suspect even with its current amount of coverage of arithmetic users
of EFLAGS it will be a significant improvement over the current use of
pushf/popf. It will also produce substantially faster code in most of
the common patterns.
This patch also removes all of the old lowering for EFLAGS copies, and
the hack that forced us to use a frame pointer when EFLAGS copies were
found anywhere in a function so that the dynamic stack adjustment wasn't
a problem. None of this is needed as we now lower all of these copies
directly in MI and without require stack adjustments.
Lots of thanks to Reid who came up with several aspects of this
approach, and Craig who helped me work out a couple of things tripping
me up while working on this.
Differential Revision: https://reviews.llvm.org/D45146
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329657 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: bogner, rnk, MatzeB, RKSimon
Reviewed By: rnk
Subscribers: JDevlieghere, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D45133
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@329435 91177308-0d34-0410-b5e6-96231b3b80d8
In r322867, we introduced IsStandalone when printing MIR in -debug
output. The default behaviour for that was:
1) If any of MBB, MI, or MO are -debug-printed separately, don't omit any
redundant information.
2) When -debug-printing a MF entirely, don't print any redundant
information.
3) When printing MIR, don't print any redundant information.
I'd like to change 2) to:
2) When -debug-printing a MF entirely, don't omit any redundant information.
Differential Revision: https://reviews.llvm.org/D43337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@326094 91177308-0d34-0410-b5e6-96231b3b80d8
Add an empty line after 'liveins:', 'successors:', or '; predecessors:',
the one that ends up to be the last one.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@325258 91177308-0d34-0410-b5e6-96231b3b80d8
MBB.print wasn't printing it, but the MIRPrinter is printing it. The
goal is to unify that as much as possible.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324681 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of:
%bb.1: derived from LLVM BB %for.body
print:
bb.1.for.body:
Also use MIR syntax for MBB attributes like "align", "landing-pad", etc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@324563 91177308-0d34-0410-b5e6-96231b3b80d8
r322086 removed the trailing information describing reg classes for each
register.
This patch adds printing reg classes next to every register when
individual operands/instructions/basic blocks are printed. In the case
of dumping MIR or printing a full function, by default don't print it.
Differential Revision: https://reviews.llvm.org/D42239
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@322867 91177308-0d34-0410-b5e6-96231b3b80d8
Headers/Implementation files should be named after the class they
declare/define.
Also eliminated an `#include "llvm/CodeGen/LiveIntervalAnalysis.h"` in
favor of `class LiveIntarvals;`
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@320546 91177308-0d34-0410-b5e6-96231b3b80d8
As part of the unification of the debug format and the MIR format, print
MBB references as '%bb.5'.
The MIR printer prints the IR name of a MBB only for block definitions.
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g'
* find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g'
* find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g'
* grep -nr 'BB#' and fix
Differential Revision: https://reviews.llvm.org/D40422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319665 91177308-0d34-0410-b5e6-96231b3b80d8
LLVM Coding Standards:
Function names should be verb phrases (as they represent actions), and
command-like function should be imperative. The name should be camel
case, and start with a lower case letter (e.g. openFile() or isFoo()).
Differential Revision: https://reviews.llvm.org/D40416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@319168 91177308-0d34-0410-b5e6-96231b3b80d8
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@318490 91177308-0d34-0410-b5e6-96231b3b80d8
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317647 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Currently the block frequency analysis is an approximation for irreducible
loops.
The new irreducible loop metadata is used to annotate the irreducible loop
headers with their header weights based on the PGO profile (currently this is
approximated to be evenly weighted) and to help improve the accuracy of the
block frequency analysis for irreducible loops.
This patch is a basic support for this.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: mehdi_amini, llvm-commits, eraman
Differential Revision: https://reviews.llvm.org/D39028
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@317278 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add LLVM_FORCE_ENABLE_DUMP cmake option, and use it along with
LLVM_ENABLE_ASSERTIONS to set LLVM_ENABLE_DUMP.
Remove NDEBUG and only use LLVM_ENABLE_DUMP to enable dump methods.
Move definition of LLVM_ENABLE_DUMP from config.h to llvm-config.h so
it'll be picked up by public headers.
Differential Revision: https://reviews.llvm.org/D38406
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315590 91177308-0d34-0410-b5e6-96231b3b80d8
Since r315388 we have a shorter way to say this, so we'll replace
MI->getParent()->getParent() with MI->getMF() in a few places.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@315390 91177308-0d34-0410-b5e6-96231b3b80d8
