If the offset is more than 24-bits, it won't fit in a scattered
relocation offset field, so we fall back to using a non-scattered
relocation.
rdar://12358909
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164724 91177308-0d34-0410-b5e6-96231b3b80d8
teach the callgraph logic to not create callgraph edges to intrinsics for invoke
instructions; it already skips this for call instructions. Fixes PR13903.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164707 91177308-0d34-0410-b5e6-96231b3b80d8
- Put statistics in alphabetical order
- Don't use getZextValue when building TableInt, just use APInts
- Introduce Create{Z,S}ExtOrTrunc in IRBuilder.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164696 91177308-0d34-0410-b5e6-96231b3b80d8
alignment guarantees attached, re-compute the alignment so that we
consider offsets which impact alignment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164690 91177308-0d34-0410-b5e6-96231b3b80d8
rewriter in SROA to carry a proper alignment. This involves
interrogating various sources of alignment, etc. This is a more complete
and principled fix to PR13920 as well as related bugs pointed out by Eli
in review and by inspection in the area.
Also by inspection fix the integer and vector promotion paths to create
aligned loads and stores. I still need to work up test cases for
these... Sorry for the delay, they were found purely by inspection.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164689 91177308-0d34-0410-b5e6-96231b3b80d8
tables in bitmaps when they fit in a target-legal register.
This saves some space, and it also allows for building tables that would
otherwise be deemed too sparse.
One interesting case that this hits is example 7 from
http://blog.regehr.org/archives/320. We currently generate good code
for this when lowering the switch to the selection DAG: we build a
bitmask to decide whether to jump to one block or the other. My patch
will result in the same bitmask, but it removes the need for the jump,
as the return value can just be retrieved from the mask.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164684 91177308-0d34-0410-b5e6-96231b3b80d8
This should really, really fix PR13916. For real this time. The
underlying bug is... a bit more subtle than I had imagined.
The setup is a code pattern that leads to an @llvm.memcpy call with two
equal pointers to an alloca in the source and dest. Now, not any pattern
will do. The alloca needs to be formed just so, and both pointers should
be wrapped in different bitcasts etc. When this precise pattern hits,
a funny sequence of events transpires. First, we correctly detect the
potential for overlap, and correctly optimize the memcpy. The first
time. However, we do simplify the set of users of the alloca, and that
causes us to run the alloca back through the SROA pass in case there are
knock-on simplifications. At this point, a curious thing has happened.
If we happen to have an i8 alloca, we have direct i8 pointer values. So
we don't bother creating a cast, we rewrite the arguments to the memcpy
to dircetly refer to the alloca.
Now, in an unrelated area of the pass, we have clever logic which
ensures that when visiting each User of a particular pointer derived
from an alloca, we only visit that User once, and directly inspect all
of its operands which refer to that particular pointer value. However,
the mechanism used to detect memcpy's with the potential to overlap
relied upon getting visited once per *Use*, not once per *User*. This is
always true *unless* the same exact value is both source and dest. It
turns out that almost nothing actually produces that pattern though.
We can hand craft test cases that more directly test this behavior of
course, and those are included. Also, note that there is a significant
missed optimization here -- we prove in many cases that there is
a non-volatile memcpy call with identical source and dest addresses. We
shouldn't prevent splitting the alloca in that case, and in fact we
should just remove such memcpy calls eagerly. I'll address that in
a subsequent commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164669 91177308-0d34-0410-b5e6-96231b3b80d8
scalar-to-vector conversion that we cannot handle. For instance, when an invalid
constraint is used in an inline asm statement.
<rdar://problem/12284092>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164662 91177308-0d34-0410-b5e6-96231b3b80d8
scalar-to-vector conversion that we cannot handle. For instance, when an invalid
constraint is used in an inline asm statement.
<rdar://problem/12284092>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164657 91177308-0d34-0410-b5e6-96231b3b80d8
only a missed optimization opportunity if the store is over-aligned, but a
miscompile if the store's new type has a higher natural alignment than the
memcpy did. Fixes PR13920!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164641 91177308-0d34-0410-b5e6-96231b3b80d8
Chandler, it's not obvious that it's okay that this alloca gets into the list
twice to begin with. Please review and see whether this is the fix you really
want, but I wanted to get a fix checked in quickly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164634 91177308-0d34-0410-b5e6-96231b3b80d8
When a BL/BLX references a symbol in the same translation unit that is
out of range, use an external relocation. The linker will use this to
generate a branch island rather than a direct reference, allowing the
relocation to resolve correctly.
rdar://12359919
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164615 91177308-0d34-0410-b5e6-96231b3b80d8
to chains or cycles between PHIs and/or selects. Also add a couple of
really nice test cases reduced from Kostya's reports in PR13905 and
PR13906. Both are fixed by this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164596 91177308-0d34-0410-b5e6-96231b3b80d8
Previously it was only be able to detect problems if the pointer was a numerical
value (eg inttoptr i32 1 to i32*), but not if it was an alloca or globa. The
reason was the use of ComputeMaskedBits: imagine you have "alloca i8, align 2",
and ask ComputeMaskedBits what it knows about the bits of the alloca pointer.
It can tell you that the bottom bit is known zero (due to align 2) but it can't
tell you that bit 1 is known one. That's because the address could be an even
multiple of 2 rather than an odd multiple, eg it might be a multiple of 4. Thus
trying to use KnownOne is ineffective in the case of an alloca as it will never
have any bits set. Instead look explicitly for constant offsets from allocas
and globals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164595 91177308-0d34-0410-b5e6-96231b3b80d8
Even out-of-line jump tables can be in the code section, so mark them
as data-regions for those targets which support the directives.
rdar://12362871&12362974
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164571 91177308-0d34-0410-b5e6-96231b3b80d8
store when handling byval arguments. Thus preventing reordering of the store
with load with post-RA scheduler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164553 91177308-0d34-0410-b5e6-96231b3b80d8
integer promotion analogous to vector promotion. When there is an
integer alloca being accessed both as its integer type and as a narrower
integer type, promote the narrower access to "insert" and "extract" the
smaller integer from the larger one, and make the integer alloca
a candidate for promotion.
In the new formulation, we don't care about target legal integer or use
thresholds to control things. Instead, we only perform this promotion to
an integer type which the frontend has already emitted a load or store
for. This bounds the scope and prevents optimization passes from
coalescing larger and larger entities into a single integer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164479 91177308-0d34-0410-b5e6-96231b3b80d8
across the uses of the alloca. It's entirely possible for negative
numbers to come up here, and in some rare cases simply doing the 2's
complement arithmetic isn't the correct decision. Notably, we can't zext
the index of the GEP. The definition of GEP is that these offsets are
sign extended or truncated to the size of the pointer, and then wrapping
2's complement arithmetic used.
This patch fixes an issue that comes up with *no* input from the
buildbots or bootstrap afaict. The only place where it manifested,
disturbingly, is Clang's own regression test suite. A reduced and
targeted collection of tests are added to cope with this. Note that I've
tried to pin down the potential cases of overflow, but may have missed
some cases. I've tried to add a few cases to test this, but its hard
because LLVM has quite limited support for >64bit constructs.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164475 91177308-0d34-0410-b5e6-96231b3b80d8
As before with load instructions, oddities like "asr #32", "rrx" could
be printed incorrectly.
Patch by Chris Lidbury.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164456 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes load/store instructions to handle less common cases
like "asr #32", "rrx" properly throughout the MC layer.
Patch by Chris Lidbury.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164455 91177308-0d34-0410-b5e6-96231b3b80d8
selects with a constant condition. This resulted in the operands
remaining live through the SROA rewriter. Most of the time, this just
caused some dead allocas to persist and get zapped by later passes, but
in one case found by Joerg, it caused a crash when we tried to *promote*
the alloca despite it having this dead use. We already have the
mechanisms in place to handle this, just wire select up to them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164427 91177308-0d34-0410-b5e6-96231b3b80d8
We rely on it when doing the transforms. This can happen when there is an
indirectbr in the loop.
Fixes PR13892.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164383 91177308-0d34-0410-b5e6-96231b3b80d8
We inserted a placeholder that was never replaced because the function was
already visited. Assert that all placeholders have been resolved when tearing
down the bitcode reader.
Fixes PR13895.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164369 91177308-0d34-0410-b5e6-96231b3b80d8
The expression based expansion too often results in IR level optimizations
splitting the intermediate values into separate basic blocks, preventing
the formation of the VBSL instruction as the code author intended. In
particular, LICM would often hoist part of the computation out of a loop.
rdar://11011471
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164340 91177308-0d34-0410-b5e6-96231b3b80d8
A PHI can't create interference on its own. If two live ranges interfere
at a PHI, they must also interfere when leaving one of the PHI
predecessors.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164330 91177308-0d34-0410-b5e6-96231b3b80d8
We already have HoistThenElseCodeToIf, this patch implements
SinkThenElseCodeToEnd. When END block has only two predecessors and each
predecessor terminates with unconditional branches, we compare instructions in
IF and ELSE blocks backwards and check whether we can sink the common
instructions down.
rdar://12191395
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164325 91177308-0d34-0410-b5e6-96231b3b80d8
- Rewrite/merge pseudo-atomic instruction emitters to address the
following issue:
* Reduce one unnecessary load in spin-loop
previously the spin-loop looks like
thisMBB:
newMBB:
ld t1 = [bitinstr.addr]
op t2 = t1, [bitinstr.val]
not t3 = t2 (if Invert)
mov EAX = t1
lcs dest = [bitinstr.addr], t3 [EAX is implicit]
bz newMBB
fallthrough -->nextMBB
the 'ld' at the beginning of newMBB should be lift out of the loop
as lcs (or CMPXCHG on x86) will load the current memory value into
EAX. This loop is refined as:
thisMBB:
EAX = LOAD [MI.addr]
mainMBB:
t1 = OP [MI.val], EAX
LCMPXCHG [MI.addr], t1, [EAX is implicitly used & defined]
JNE mainMBB
sinkMBB:
* Remove immopc as, so far, all pseudo-atomic instructions has
all-register form only, there is no immedidate operand.
* Remove unnecessary attributes/modifiers in pseudo-atomic instruction
td
* Fix issues in PR13458
- Add comprehensive tests on atomic ops on various data types.
NOTE: Some of them are turned off due to missing functionality.
- Revise tests due to the new spin-loop generated.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164281 91177308-0d34-0410-b5e6-96231b3b80d8
A common coalescing conflict in vector code is lane insertion:
%dst = FOO
%src = BAR
%dst:ssub0 = COPY %src
The live range of %src interferes with the ssub0 lane of %dst, but that
lane is never read after %src would have clobbered it. That makes it
safe to merge the live ranges and eliminate the COPY:
%dst = FOO
%dst:ssub0 = BAR
This patch teaches the new coalescer to resolve conflicts where dead
vector lanes would be clobbered, at least as long as the clobbered
vector lanes don't escape the basic block.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164250 91177308-0d34-0410-b5e6-96231b3b80d8
to improve compatibility with GNU as.
Based on a patch by PaX Team.
Fixed assertion failures on non-Darwin and added additional test cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164248 91177308-0d34-0410-b5e6-96231b3b80d8
- Merge the processing of LOAD_ADD with other atomic load-arith
operations
- Separate the logic getting target constant for atomic-load-op and add
an optimization for atomic-load-add on i16 with negative value
- Optimize a minor case for atomic-fetch-add i16 with negative operand. Test
case is revised.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164243 91177308-0d34-0410-b5e6-96231b3b80d8
XFAIL needs a trailing colon. Hopefully this will get the buildbots
happy again while Bill works on getting it passing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164237 91177308-0d34-0410-b5e6-96231b3b80d8
lib/Target/PowerPC/PPCISelLowering.{h,cpp}
Rename LowerFormalArguments_Darwin to LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerFormalArguments_SVR4 to LowerFormalArguments_32SVR4.
Receive small structs right-justified in LowerFormalArguments_Darwin_Or_64SVR4.
Rename LowerCall_Darwin to LowerCall_Darwin_Or_64SVR4.
Rename LowerCall_SVR4 to LowerCall_32SVR4.
Pass small structs right-justified in LowerCall_Darwin_Or_64SVR4.
test/CodeGen/PowerPC/structsinregs.ll
New test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164228 91177308-0d34-0410-b5e6-96231b3b80d8
two variables where the first variable is returned and the second
ignored.
I don't think this occurs in practice (other passes should have cleaned
up the unused phi node), but it should still be handled correctly.
Also make the logic for determining if we should return early less
sketchy.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164225 91177308-0d34-0410-b5e6-96231b3b80d8
Because the test invokes llc -march=sparc, it needs to be in a directory
which is only run when the sparc target is built.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164211 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up from r163302, which added a transformation to
SimplifyCFG that turns some switches into loads from lookup tables.
It was pointed out that some targets, such as GPUs and deeply embedded
targets, might not find this appropriate, but SimplifyCFG doesn't have
enough information about the target to decide this.
This patch adds the reverse transformation to CodeGenPrep: it turns
loads from lookup tables back into switches for targets where we do not
build jump tables (assuming these are also the targets where lookup
tables are inappropriate).
Hopefully we will eventually get to have target information in
SimplifyCFG, and then this CodeGenPrep transformation can be removed.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164206 91177308-0d34-0410-b5e6-96231b3b80d8
from the dragonegg build bots when we turned on the full version of the
pass. Included a much reduced test case for this pesky bug, despite
bugpoint's uncooperative behavior.
Also, I audited all the similar code I could find and didn't spot any
other cases where this mistake cropped up.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164178 91177308-0d34-0410-b5e6-96231b3b80d8
working on FCA splitting. Instead of refusing to form a common type when
there are uses of a subsection of the alloca as well as a use of the
entire alloca, just skip the subsection uses and continue looking for
a whole-alloca use with a type that we can use.
This produces slightly prettier IR I think, and also fixes the other
failure in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164146 91177308-0d34-0410-b5e6-96231b3b80d8
FCAs. This is essential in order to promote allocas that are used in
struct returns by frontends like Clang. The FCA load would block the
rest of the pass from firing, resulting is significant regressions with
the bullet benchmark in the nightly test suite.
Thanks to Duncan for repeated discussions about how best to do this, and
to both him and Benjamin for review.
This appears to have blocked many places where the pass tries to fire,
and so I'm expect somewhat different results with this fix added.
As with the last big patch, I'm including a change to enable the SROA by
default *temporarily*. Ben is going to remove this as soon as the LNT
bots pick up the patch. I'm just trying to get a round of LNT numbers
from the stable machines in the lab.
NOTE: Four clang tests are expected to fail in the brief window where
this is enabled. Sorry for the noise!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164119 91177308-0d34-0410-b5e6-96231b3b80d8
aligned address. Based on patch by David Peixotto.
Also use vld1.64 / vst1.64 with 128-bit alignment to take advantage of alignment
hints. rdar://12090772, rdar://12238782
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164089 91177308-0d34-0410-b5e6-96231b3b80d8
Hanlde the case when we split the default edge if the default target has "icmp"
and unconditinal branch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164076 91177308-0d34-0410-b5e6-96231b3b80d8
Add LIS::pruneValue() and extendToIndices(). These two functions are
used by the register coalescer when merging two live ranges requires
more than a trivial value mapping as supported by LiveInterval::join().
The pruneValue() function can remove the part of a value number that is
going to conflict in join(). Afterwards, extendToIndices can restore the
live range, using any new dominating value numbers and updating the SSA
form.
Use this complex value mapping to support merging a register into a
vector lane that has a conflicting value, but the clobbered lane is
undef.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@164074 91177308-0d34-0410-b5e6-96231b3b80d8
It had patterns for zext-loading and extending. This commit adds patterns for loading a wide type, performing a bitcast,
and extending. This is an odd pattern, but it is commonly used when writing code with intrinsics.
rdar://11897677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163995 91177308-0d34-0410-b5e6-96231b3b80d8
new one, and add support for running the new pass in that mode and in
that slot of the pass manager. With this the new pass can completely
replace the old one within the pipeline.
The strategy for enabling or disabling the SSAUpdater logic is to do it
by making the requirement of the domtree analysis optional. By default,
it is required and we get the standard mem2reg approach. This is usually
the desired strategy when run in stand-alone situations. Within the
CGSCC pass manager, we disable requiring of the domtree analysis and
consequentially trigger fallback to the SSAUpdater promotion.
In theory this would allow the pass to re-use a domtree if one happened
to be available even when run in a mode that doesn't require it. In
practice, it lets us have a single pass rather than two which was
simpler for me to wrap my head around.
There is a hidden flag to force the use of the SSAUpdater code path for
the purpose of testing. The primary testing strategy is just to run the
existing tests through that path. One notable difference is that it has
custom code to handle lifetime markers, and one of the tests has been
enhanced to exercise that code.
This has survived a bootstrap and the test suite without serious
correctness issues, however my run of the test suite produced *very*
alarming performance numbers. I don't entirely understand or trust them
though, so more investigation is on-going.
To aid my understanding of the performance impact of the new SROA now
that it runs throughout the optimization pipeline, I'm enabling it by
default in this commit, and will disable it again once the LNT bots have
picked up one iteration with it. I want to get those bots (which are
much more stable) to evaluate the impact of the change before I jump to
any conclusions.
NOTE: Several Clang tests will fail because they run -O3 and check the
result's order of output. They'll go back to passing once I disable it
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163965 91177308-0d34-0410-b5e6-96231b3b80d8
destination.
Updated previous implementation to fix a case not covered:
// PBI: br i1 %x, TrueDest, BB
// BI: br i1 %y, TrueDest, FalseDest
The other case was handled correctly.
// PBI: br i1 %x, BB, FalseDest
// BI: br i1 %y, TrueDest, FalseDest
Also tried to use 64-bit arithmetic instead of APInt with scale to simplify the
computation. Let me know if you have other opinions about this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163954 91177308-0d34-0410-b5e6-96231b3b80d8
the default target of the first switch is not the basic block the second switch
is in (PredDefault != BB).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163916 91177308-0d34-0410-b5e6-96231b3b80d8
This is essentially a ground up re-think of the SROA pass in LLVM. It
was initially inspired by a few problems with the existing pass:
- It is subject to the bane of my existence in optimizations: arbitrary
thresholds.
- It is overly conservative about which constructs can be split and
promoted.
- The vector value replacement aspect is separated from the splitting
logic, missing many opportunities where splitting and vector value
formation can work together.
- The splitting is entirely based around the underlying type of the
alloca, despite this type often having little to do with the reality
of how that memory is used. This is especially prevelant with unions
and base classes where we tail-pack derived members.
- When splitting fails (often due to the thresholds), the vector value
replacement (again because it is separate) can kick in for
preposterous cases where we simply should have split the value. This
results in forming i1024 and i2048 integer "bit vectors" that
tremendously slow down subsequnet IR optimizations (due to large
APInts) and impede the backend's lowering.
The new design takes an approach that fundamentally is not susceptible
to many of these problems. It is the result of a discusison between
myself and Duncan Sands over IRC about how to premptively avoid these
types of problems and how to do SROA in a more principled way. Since
then, it has evolved and grown, but this remains an important aspect: it
fixes real world problems with the SROA process today.
First, the transform of SROA actually has little to do with replacement.
It has more to do with splitting. The goal is to take an aggregate
alloca and form a composition of scalar allocas which can replace it and
will be most suitable to the eventual replacement by scalar SSA values.
The actual replacement is performed by mem2reg (and in the future
SSAUpdater).
The splitting is divided into four phases. The first phase is an
analysis of the uses of the alloca. This phase recursively walks uses,
building up a dense datastructure representing the ranges of the
alloca's memory actually used and checking for uses which inhibit any
aspects of the transform such as the escape of a pointer.
Once we have a mapping of the ranges of the alloca used by individual
operations, we compute a partitioning of the used ranges. Some uses are
inherently splittable (such as memcpy and memset), while scalar uses are
not splittable. The goal is to build a partitioning that has the minimum
number of splits while placing each unsplittable use in its own
partition. Overlapping unsplittable uses belong to the same partition.
This is the target split of the aggregate alloca, and it maximizes the
number of scalar accesses which become accesses to their own alloca and
candidates for promotion.
Third, we re-walk the uses of the alloca and assign each specific memory
access to all the partitions touched so that we have dense use-lists for
each partition.
Finally, we build a new, smaller alloca for each partition and rewrite
each use of that partition to use the new alloca. During this phase the
pass will also work very hard to transform uses of an alloca into a form
suitable for promotion, including forming vector operations, speculating
loads throguh PHI nodes and selects, etc.
After splitting is complete, each newly refined alloca that is
a candidate for promotion to a scalar SSA value is run through mem2reg.
There are lots of reasonably detailed comments in the source code about
the design and algorithms, and I'm going to be trying to improve them in
subsequent commits to ensure this is well documented, as the new pass is
in many ways more complex than the old one.
Some of this is still a WIP, but the current state is reasonbly stable.
It has passed bootstrap, the nightly test suite, and Duncan has run it
successfully through the ACATS and DragonEgg test suites. That said, it
remains behind a default-off flag until the last few pieces are in
place, and full testing can be done.
Specific areas I'm looking at next:
- Improved comments and some code cleanup from reviews.
- SSAUpdater and enabling this pass inside the CGSCC pass manager.
- Some datastructure tuning and compile-time measurements.
- More aggressive FCA splitting and vector formation.
Many thanks to Duncan Sands for the thorough final review, as well as
Benjamin Kramer for lots of review during the process of writing this
pass, and Daniel Berlin for reviewing the data structures and algorithms
and general theory of the pass. Also, several other people on IRC, over
lunch tables, etc for lots of feedback and advice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163883 91177308-0d34-0410-b5e6-96231b3b80d8
- Enhance the fix to PR12312 to support wider integer, such as 256-bit
integer. If more than 1 fully evaluated vectors are found, POR them
first followed by the final PTEST.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163832 91177308-0d34-0410-b5e6-96231b3b80d8
- Find a legal vector type before casting and extracting element from it.
- As the new vector type may have more than 2 elements, build the final
hi/lo pair by BFS pairing them from bottom to top.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163830 91177308-0d34-0410-b5e6-96231b3b80d8
Add a PatFrag to match X86tcret using 6 fixed registers or less. This
avoids folding loads into TCRETURNmi64 using 7 or more volatile
registers.
<rdar://problem/12282281>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163819 91177308-0d34-0410-b5e6-96231b3b80d8
by xoring the high-bit. This fails if the source operand is a vector because we need to negate
each of the elements in the vector.
Fix rdar://12281066 PR13813.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163802 91177308-0d34-0410-b5e6-96231b3b80d8
are within the lifetime zone. Sometime legitimate usages of allocas are
hoisted outside of the lifetime zone. For example, GEPS may calculate the
address of a member of an allocated struct. This commit makes sure that
we only check (abort regions or assert) for instructions that read and write
memory using stack frames directly. Notice that by allowing legitimate
usages outside the lifetime zone we also stop checking for instructions
which use derivatives of allocas. We will catch less bugs in user code
and in the compiler itself.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163791 91177308-0d34-0410-b5e6-96231b3b80d8
We don't have enough GR64_TC registers when calling a varargs function
with 6 arguments. Since %al holds the number of vector registers used,
only %r11 is available as a scratch register.
This means that addressing modes using both base and index registers
can't be folded into TCRETURNmi64.
<rdar://problem/12282281>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163761 91177308-0d34-0410-b5e6-96231b3b80d8
Add some support for dealing with an object pointer on arguments.
Part of rdar://9797999
which now supports adding the object pointer attribute to the
subprogram as it should.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163754 91177308-0d34-0410-b5e6-96231b3b80d8
- BlockAddress has no support of BA + offset form and there is no way to
propagate that offset into machine operand;
- Add BA + offset support and a new interface 'getTargetBlockAddress' to
simplify target block address forming;
- All targets are modified to use new interface and X86 backend is enhanced to
support BA + offset addressing.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163743 91177308-0d34-0410-b5e6-96231b3b80d8
nonvolatile condition register fields across calls under the SVR4 ABIs.
* With the 64-bit ABI, the save location is at a fixed offset of 8 from
the stack pointer. The frame pointer cannot be used to access this
portion of the stack frame since the distance from the frame pointer may
change with alloca calls.
* With the 32-bit ABI, the save location is just below the general
register save area, and is accessed via the frame pointer like the rest
of the save areas. This is an optional slot, so it must only be created
if any of CR2, CR3, and CR4 were modified.
* For both ABIs, save/restore logic is generated only if one of the
nonvolatile CR fields were modified.
I also took this opportunity to clean up an extra FIXME in
PPCFrameLowering.h. Save area offsets for 32-bit GPRs are meaningless
for the 64-bit ABI, so I removed them for correctness and efficiency.
Fixes PR13708 and partially also PR13623. It lets us enable exception handling
on PPC64.
Patch by William J. Schmidt!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163713 91177308-0d34-0410-b5e6-96231b3b80d8
SelectionDAG::getConstantFP(double Val, EVT VT, bool isTarget);
should not be used when Val is not a simple constant (as the comment in
SelectionDAG.h indicates). This patch avoids using this function
when folding an unknown constant through a bitcast, where it cannot be
guaranteed that Val will be a simple constant.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163703 91177308-0d34-0410-b5e6-96231b3b80d8
The input program may contain intructions which are not inside lifetime
markers. This can happen due to a bug in the compiler or due to a bug in
user code (for example, returning a reference to a local variable).
This commit adds checks that all of the instructions in the function and
invalidates lifetime ranges which do not contain all of the instructions.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163678 91177308-0d34-0410-b5e6-96231b3b80d8
a pair of switch/branch where both depend on the value of the same variable and
the default case of the first switch/branch goes to the second switch/branch.
Code clean up and fixed a few issues:
1> handling the case where some cases of the 2nd switch are invalidated
2> correctly calculate the weight for the 2nd switch when it is a conditional eq
Testing case is modified from Alastair's original patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163635 91177308-0d34-0410-b5e6-96231b3b80d8
The ARM backend can eliminate cmp instructions by reusing flags from a
nearby sub instruction with similar arguments.
Don't do that if the sub is predicated - the flags are not written
unconditionally.
<rdar://problem/12263428>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163535 91177308-0d34-0410-b5e6-96231b3b80d8
- If a boolean value is generated from CMOV and tested as boolean value,
simplify the use of test result by referencing the original condition.
RDRAND intrinisc is one of such cases.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163516 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason .lcomm uses byte alignment and .comm log2 alignment so we can't
use the same setting for both. Fix this by reintroducing the LCOMM enum.
I verified this against mingw's gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163420 91177308-0d34-0410-b5e6-96231b3b80d8
- Darwin lied about not supporting .lcomm and turned it into zerofill in the
asm parser. Push the zerofill-conversion down into macho-specific code.
- This makes the tri-state LCOMMType enum superfluous, there are no targets
without .lcomm.
- Do proper error reporting when trying to use .lcomm with alignment on a target
that doesn't support it.
- .comm and .lcomm alignment was parsed in bytes on COFF, should be power of 2.
- Fixes PR13755 (.lcomm crashes on ELF).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163395 91177308-0d34-0410-b5e6-96231b3b80d8
gas accepts this and it seems to be common enough to be worth supporting. This
doesn't affect the parsing of reg operands outside of .cfi directives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163390 91177308-0d34-0410-b5e6-96231b3b80d8
The assembler can alias one instruction into another based
on the operands. For example the jump instruction "J" takes
and immediate operand, but if the operand is a register the
assembler will change it into a jump register "JR" instruction.
These changes are in the instruction td file.
Test cases included
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163368 91177308-0d34-0410-b5e6-96231b3b80d8
Actually these are just stubs for parsing the directives.
Semantic support will come later.
Test cases included
Contributer: Vladimir Medic
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163364 91177308-0d34-0410-b5e6-96231b3b80d8
- This patch is inspired by the failure of the following code snippet
which is used to convert enumerable values into encoding bits to
improve the readability of td files.
class S<int s> {
bits<2> V = !if(!eq(s, 8), {0, 0},
!if(!eq(s, 16), {0, 1},
!if(!eq(s, 32), {1, 0},
!if(!eq(s, 64), {1, 1}, {?, ?}))));
}
Later, PR8330 is found to report not exactly the same bug relevant
issue to bit/bits values.
- Instead of resolving bit/bits values separately through
resolveBitReference(), this patch adds getBit() for all Inits and
resolves bit value by resolving plus getting the specified bit. This
unifies the resolving of bit with other values and removes redundant
logic for resolving bit only. In addition,
BitsInit::resolveReferences() is optimized to take advantage of this
origanization by resolving VarBitInit's variable reference first and
then getting bits from it.
- The type interference in '!if' operator is revised to support possible
combinations of int and bits/bit in MHS and RHS.
- As there may be illegal assignments from integer value to bit, says
assign 2 to a bit, but we only check this during instantiation in some
cases, e.g.
bit V = !if(!eq(x, 17), 0, 2);
Verbose diagnostic message is generated when invalid value is
resolveed to help locating the error.
- PR8330 is fixed as well.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163360 91177308-0d34-0410-b5e6-96231b3b80d8
The RegisterCoalescer understands overlapping live ranges where one
register is defined as a copy of the other. With this change, register
allocators using LiveRegMatrix can do the same, at least for copies
between physical and virtual registers.
When a physreg is defined by a copy from a virtreg, allow those live
ranges to overlap:
%CL<def> = COPY %vreg11:sub_8bit; GR32_ABCD:%vreg11
%vreg13<def,tied1> = SAR32rCL %vreg13<tied0>, %CL<imp-use,kill>
We can assign %vreg11 to %ECX, overlapping the live range of %CL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163336 91177308-0d34-0410-b5e6-96231b3b80d8
Enhances basic alias analysis to recognize phis whose first incoming values are
NoAlias and whose other incoming values are just the phi node itself through
some amount of recursion.
Example: With this change basicaa reports that ptr_phi and ptr_phi2 do not alias
each other.
bb:
ptr = ptr2 + 1
loop:
ptr_phi = phi [bb, ptr], [loop, ptr_plus_one]
ptr2_phi = phi [bb, ptr2], [loop, ptr2_plus_one]
...
ptr_plus_one = gep ptr_phi, 1
ptr2_plus_one = gep ptr2_phi, 1
This enables the elimination of one load in code like the following:
extern int foo;
int test_noalias(int *ptr, int num, int* coeff) {
int *ptr2 = ptr;
int result = (*ptr++) * (*coeff--);
while (num--) {
*ptr2++ = *ptr;
result += (*coeff--) * (*ptr++);
}
*ptr = foo;
return result;
}
Part 2/2 of fix for PR13564.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163319 91177308-0d34-0410-b5e6-96231b3b80d8
If we can show that the base pointers of two GEPs don't alias each other using
precise analysis and the indices and base offset are equal then the two GEPs
also don't alias each other.
This is primarily needed for the follow up patch that analyses NoAlias'ing PHI
nodes.
Part 1/2 of fix for PR13564.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163317 91177308-0d34-0410-b5e6-96231b3b80d8
The lookup tables did not get built in a deterministic order.
This makes them get built in the order that the corresponding phi nodes
were found.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163305 91177308-0d34-0410-b5e6-96231b3b80d8
If we have a BUILD_VECTOR that is mostly a constant splat, it is often better to splat that constant then insertelement the non-constant lanes instead of insertelementing every lane from an undef base.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163304 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a transformation to SimplifyCFG that attemps to turn switch
instructions into loads from lookup tables. It works on switches that
are only used to initialize one or more phi nodes in a common successor
basic block, for example:
int f(int x) {
switch (x) {
case 0: return 5;
case 1: return 4;
case 2: return -2;
case 5: return 7;
case 6: return 9;
default: return 42;
}
This speeds up the code by removing the hard-to-predict jump, and
reduces code size by removing the code for the jump targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163302 91177308-0d34-0410-b5e6-96231b3b80d8
Now that it is possible to dynamically tie MachineInstr operands,
predicated instructions are possible in SSA form:
%vreg3<def> = SUBri %vreg1, -2147483647, pred:14, pred:%noreg, %opt:%noreg
%vreg4<def,tied1> = MOVCCr %vreg3<tied0>, %vreg1, %pred:12, pred:%CPSR
Becomes a predicated SUBri with a tied imp-use:
SUBri %vreg1, -2147483647, pred:13, pred:%CPSR, opt:%noreg, %vreg1<imp-use,tied0>
This means that any instruction that is safe to move can be folded into
a MOVCC, and the *CC pseudo-instructions are no longer needed.
The test case changes reflect that Thumb2SizeReduce recognizes the
predicated instructions. It didn't understand the pseudos.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163274 91177308-0d34-0410-b5e6-96231b3b80d8
switch, make sure we include the value for the cases when calculating edge
value from switch to the default destination.
rdar://12241132
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163270 91177308-0d34-0410-b5e6-96231b3b80d8
Previous patch accidentally decided it couldn't convert a VFP to a
NEON instruction after it had already destroyed the old one. Not a
good move.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163230 91177308-0d34-0410-b5e6-96231b3b80d8
subreg_hireg of register pair Rp.
* lib/Target/Hexagon/HexagonPeephole.cpp(PeepholeDoubleRegsMap): New
DenseMap similar to PeepholeMap that additionally records subreg info
too.
(runOnMachineFunction): Record information in PeepholeDoubleRegsMap
and copy propagate the high sub-reg of Rp0 in Rp1 = lsr(Rp0, #32) to
the instruction Rx = COPY Rp1:logreg_subreg.
* test/CodeGen/Hexagon/remove_lsr.ll: New test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163214 91177308-0d34-0410-b5e6-96231b3b80d8
pointers-to-strong-pointers may be in play. These can lead to retains and
releases happening in unstructured ways, foiling the optimizer. This fixes
rdar://12150909.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@163180 91177308-0d34-0410-b5e6-96231b3b80d8
