Pattern match has some paths which can operate on constant instructions,
but not all. This adds a version of m_value() to return const Value* and
changes ICmp matching to use auto so that it can match both constant and
mutable instructions.
Tests also included for both mutable and constant ICmpInst matching.
This will be used in a future commit to constify ValueTracking.cpp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278570 91177308-0d34-0410-b5e6-96231b3b80d8
Remove all ilist_iterator to pointer casts. There were two reasons for
casts:
- Checking for an uninitialized (i.e., null) iterator. I added
MachineInstrBundleIterator::isValid() to check for that case.
- Comparing an iterator against the underlying pointer value while
avoiding converting the pointer value to an iterator. This is
occasionally necessary in MachineInstrBundleIterator, since there is
an assertion in the constructors that the underlying MachineInstr is
not bundled (but we don't care about that if we're just checking for
pointer equality).
To support the latter case, I rewrote the == and != operators for
ilist_iterator and MachineInstrBundleIterator.
- The implicit constructors now use enable_if to exclude
const-iterator => non-const-iterator conversions from overload
resolution (previously it was a compiler error on instantiation, now
it's SFINAE).
- The == and != operators are now global (friends), and are not
templated.
- MachineInstrBundleIterator has overloads to compare against both
const_pointer and const_reference. This avoids the implicit
conversions to MachineInstrBundleIterator that assert, instead just
checking the address (and I added unit tests to confirm this).
Notably, the only remaining uses of ilist_iterator::getNodePtrUnchecked
are in ilist.h, and no code outside of ilist*.h directly relies on this
UB end-iterator-to-pointer conversion anymore. It's still needed for
ilist_*sentinel_traits, but I'll clean that up soon.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278478 91177308-0d34-0410-b5e6-96231b3b80d8
If the result of the find is only used to compare against end(), just
use is_contained instead.
No functionality change is intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278433 91177308-0d34-0410-b5e6-96231b3b80d8
One exception here is LoopInfo which must forward-declare it (because
the typedef is in LoopPassManager.h which depends on LoopInfo).
Also, some includes for LoopPassManager.h were needed since that file
provides the typedef.
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278079 91177308-0d34-0410-b5e6-96231b3b80d8
Besides a general consistently benefit, the extra layer of indirection
allows the mechanical part of https://reviews.llvm.org/D23256 that
requires touching every transformation and analysis to be factored out
cleanly.
Thanks to David for the suggestion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@278077 91177308-0d34-0410-b5e6-96231b3b80d8
The current approach isn't a long-term viable pattern. Given the set of
architectures A, vendors V, operating systems O, and environments E, it
does |A| * |V| * |O| * |E| * 4! tests. As LLVM grows, this test keeps
getting slower, despite my working very hard to make it get some
"optimizations" even in -O0 builds in order to lower the constant
factors. Fundamentally, we're doing an unreasonable amount of work.i
Looking at the specific thing being tested -- the goal seems very
clearly to be testing the *permutations*, not the *combinations*. The
combinations are driving up the complexity much more than anything else.
Instead, test every possible value for a given triple entry in every
permutation of *some* triple. This really seems to cover the core goal
of the test. Every single possible triple component is tested in every
position. But because we keep the rest of the triple constant, it does
so in a dramatically more scalable amount of time. With this model we do
(|A| + |V| + |O| + |E|) * 4! tests.
For me on a debug build, this goes from running for 19 seconds to 19
milliseconds, or a 1000x improvement. This makes a world of difference
for the critical path of 'ninja check-llvm' and other extremely common
workflows.
Thanks to Renato, Dean, and David for the helpful review comments and
helping me refine the explanation of the change.
Differential Revision: https://reviews.llvm.org/D23156
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277912 91177308-0d34-0410-b5e6-96231b3b80d8
String pooling is not guaranteed by the standard, so if
you're comparing two different string literals for equality,
you have to use strcmp.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277831 91177308-0d34-0410-b5e6-96231b3b80d8
Didn't want to fold this in with r277640, since it touches bits that
aren't entirely related to r277640.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277641 91177308-0d34-0410-b5e6-96231b3b80d8
This is a follow-up to r277637. It teaches MemorySSA that invariant
loads (and loads of provably constant memory) are always liveOnEntry.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277640 91177308-0d34-0410-b5e6-96231b3b80d8
This is a fix for PR28697.
An MDNode can indirectly refer to a GlobalValue, through a
ConstantAsMetadata. When the GlobalValue is deleted, the MDNode operand
is reset to `nullptr`. If the node is uniqued, this can lead to a
hard-to-detect cache invalidation in a Metadata map that's shared across
an LLVMContext.
Consider:
1. A map from Metadata* to `T` called RemappedMDs.
2. A node that references a global variable, `!{i1* @GV}`.
3. Insert `!{i1* @GV} -> SomeT` in the map.
4. Delete `@GV`, leaving behind `!{null} -> SomeT`.
Looking up the generic and uninteresting `!{null}` gives you `SomeT`,
which is likely related to `@GV`. Worse, `SomeT`'s lifetime may be tied
to the deleted `@GV`.
This occurs in practice in the shared ValueMap used since r266579 in the
IRMover. Other code that handles more than one Module (with different
lifetimes) in the same LLVMContext could hit it too.
The fix here is a partial revert of r225223: in the rare case that an
MDNode operand is a ConstantAsMetadata (i.e., wrapping a node from the
Value hierarchy), drop uniquing if it gets replaced with `nullptr`.
This changes step #4 above to leave behind `distinct !{null} -> SomeT`,
which can't be confused with the generic `!{null}`.
In theory, this can cause some churn in the LLVMContext's MDNode
uniquing map when Values are being deleted. However:
- The number of GlobalValues referenced from uniqued MDNodes is
expected to be quite small. E.g., the debug info metadata schema
only references GlobalValues from distinct nodes.
- Other Constants have the lifetime of the LLVMContext, whose teardown
is careful to drop references before deleting the constants.
As a result, I don't expect a compile time regression from this change.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277625 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a bug where we'd sometimes cache overly-conservative results
with our walker. This bug was made more obvious by r277480, which makes
our cache far more spotty than it was. Test case is llvm-unit, because
we're likely going to use CachingWalker only for def optimization in the
future.
The bug stems from that there was a place where the walker assumed that
`DefNode.Last` was a valid target to cache to when failing to optimize
phis. This is sometimes incorrect if we have a cache hit. The fix is to
use the thing we *can* assume is a valid target to cache to. :)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277559 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: By generalize the interface, users are able to inject more flexible Node token into the algorithm, for example, a pair of vector<Node>* and index integer. Currently I only migrated SCCIterator to use NodeRef, but more is coming. It's a NFC.
Reviewers: dblaikie, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D22937
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277399 91177308-0d34-0410-b5e6-96231b3b80d8
This patch replaces RuntimeDyld::SymbolInfo with JITSymbol: A symbol class
that is capable of lazy materialization (i.e. the symbol definition needn't be
emitted until the address is requested). This can be used to support common
and weak symbols in the JIT (though this is not implemented in this patch).
For consistency, RuntimeDyld::SymbolResolver is renamed to JITSymbolResolver.
For space efficiency a new class, JITEvaluatedSymbol, is introduced that
behaves like the old RuntimeDyld::SymbolInfo - i.e. it is just a pair of an
address and symbol flags. Instances of JITEvaluatedSymbol can be used in
symbol-tables to avoid paying the space cost of the materializer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277386 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This change fixes issues with `LLVM_CONSTEXPR` functions and
`TrailingObjects::FixedSizeStorage`. In particular, some of the
functions marked `LLVM_CONSTEXPR` used by `FixedSizeStorage` were not
implemented such that they evaluate successfully as part of a constant
expression despite constant arguments.
This change also implements a more traditional template-meta path to
accommodate MSVC, and adds unit tests for `FixedSizeStorage`.
Drive-by fix: the access control for members of `TrailingObjectsImpl` is
tightened.
Reviewers: faisalv, rsmith, aaron.ballman
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D22668
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277270 91177308-0d34-0410-b5e6-96231b3b80d8
Previously this change was submitted from a Windows machine, so
changes made to the case of filenames and directory names did
not survive the commit, and as a result the CMake source file
names and the on-disk file names did not match on case-sensitive
file systems.
I'm resubmitting this patch from a Linux system, which hopefully
allows the case changes to make it through unfettered.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277213 91177308-0d34-0410-b5e6-96231b3b80d8
In a previous patch, it was suggested to use all caps instead of
rolling caps for initialisms, so this patch changes everything
to do this.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277190 91177308-0d34-0410-b5e6-96231b3b80d8
When coming from an IR label type, we set a 0 NumElements, but not
when constructing an LLT using unsized(), causing comparisons to fail.
Pick one variant and fix the other.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277161 91177308-0d34-0410-b5e6-96231b3b80d8
This was a pure virtual base class whose purpose was to abstract
away the notion of how you retrieve the layout of a discontiguous
stream of blocks in an Msf file. This led to too many layers of
abstraction making it difficult to figure out what was going on
and extend things. Ultimately, a stream's layout is decided by
its length and the array of block numbers that it lives on. So
rather than have an abstract base class which can return this in
any number of ways, it's more straightforward to simply store them
as fields of a trivial struct, and also to give a more appropriate
name.
This patch does that. It renames IMsfStreamData to MsfStreamLayout,
and deletes the 2 concrete implementations, DirectoryStreamData
and IndexedStreamData. MsfStreamLayout is a trivial struct
with the necessary data.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277018 91177308-0d34-0410-b5e6-96231b3b80d8
These loop from 0 to AEK_XSCALE, which is currently defined as 0x80000000, and
thus the tests loop over the entire int range, which is unreasonable
and also too slow in debug builds.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276969 91177308-0d34-0410-b5e6-96231b3b80d8
Add unittest to {ARM | AArch64}TargetParser,and by the way correct problems as below:
1.Correct a incorrect indexing problem in AArch64TargetParser. The architecture enumeration
is shared across ARM and AArch64 in original implementation.But In the code,I just used the
index which was offset by the ARM, and this would index into the array incorrectly. To make
AArch64 has its own arch enum,or we will do a lot of slowly iterating.
2.Correct a spelling error. The parameter of llvm::AArch64::getArchExtName.
3.Correct a writing mistake, in llvm::ARM::parseArchISA.
Differential Revision: https://reviews.llvm.org/D21785
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276957 91177308-0d34-0410-b5e6-96231b3b80d8
Change the syntax to use `%0.sub8` to denote a subregister.
This seems like a more natural fit to denote subregisters; I also plan
to introduce a new ":classname" syntax in upcoming patches to denote the
register class of a vreg.
Note that this commit disallows plain identifiers to start with a '.'
character. This shouldn't affect anything as external names/IR
references are all prefixed with '$'/'%', plain identifiers are only
used for instruction names, register mask names and subreg indexes.
Differential Revision: https://reviews.llvm.org/D22390
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276815 91177308-0d34-0410-b5e6-96231b3b80d8
If we move a last-use register read to a later position we may skip
intermediate segments. This may require us to not only extend the
segment before the NewIdx, but also extend the segment live-in to
OldIdx.
This switches LiveIntervalTest to use AMDGPU so we can test subregister
liveness.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276724 91177308-0d34-0410-b5e6-96231b3b80d8
This adds versions of operator + and - which are optimized for the LHS/RHS of the
operator being RValue's. When an RValue is available, we can use its storage space
instead of allocating new space.
On code such as ConstantRange which makes heavy use of APInt's over 64-bits in size,
this results in significant numbers of saved allocations.
Thanks to David Blaikie for all the review and most of the code here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276470 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason this doesn't cause linker errors with MSVC or
clang-cl, but the bots seem to be failing with other compilers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276463 91177308-0d34-0410-b5e6-96231b3b80d8
This provides a better layering of responsibilities among different
aspects of PDB writing code. Some of the MSF related code was
contained in CodeView, and some was in PDB prior to this. Further,
we were often saying PDB when we meant MSF, and the two are
actually independent of each other since in theory you can have
other types of data besides PDB data in an MSF. So, this patch
separates the MSF specific code into its own library, with no
dependencies on anything else, and DebugInfoCodeView and
DebugInfoPDB take dependencies on DebugInfoMsf.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276458 91177308-0d34-0410-b5e6-96231b3b80d8
This allows ErrorAsOutParameter to work better with "optional" errors. For
example, consider a function where for certain input values it is known that
the function can't fail. This can now be written as:
Result foo(Arg X, Error *Err) {
ErrorAsOutParameter EAO(Err);
if (<Error Condition>) {
if (Err)
*Err = <report error>;
else
llvm_unreachable("Unexpected failure!");
}
}
Rather than having to construct an ErrorAsOutParameter under every conditional
where Err is known to be non-null.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276430 91177308-0d34-0410-b5e6-96231b3b80d8
This provides an elegant pattern to solve the "construct if not in map
already" problem we have many times in LLVM. Without try_emplace we
either have to rely on a sentinel value (nullptr) or do two lookups.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276277 91177308-0d34-0410-b5e6-96231b3b80d8
Coincidentally this function maps to the C++17 try_emplace. Rename it
for consistentcy with C++17 std::map. NFC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276276 91177308-0d34-0410-b5e6-96231b3b80d8
This adds an (incomplete, inefficient) framework for deciding what to do with
some operation on a given type.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276184 91177308-0d34-0410-b5e6-96231b3b80d8
Add a "-j" option to llvm-profdata to control the number of threads used.
Auto-detect NumThreads when it isn't specified, and avoid spawning threads when
they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Changes since the initial commit:
- When handling odd-length inputs, call ThreadPool::wait() before merging the
last profile. Should fix a race/off-by-one (see r275937).
Differential Revision: https://reviews.llvm.org/D22438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275938 91177308-0d34-0410-b5e6-96231b3b80d8
Add a "-j" option to llvm-profdata to control the number of threads
used. Auto-detect NumThreads when it isn't specified, and avoid spawning
threads when they wouldn't be beneficial.
I tested this patch using a raw profile produced by clang (147MB). Here is the
time taken to merge 4 copies together on my laptop:
No thread pool: 112.87s user 5.92s system 97% cpu 2:01.08 total
With 2 threads: 134.99s user 26.54s system 164% cpu 1:33.31 total
Differential Revision: https://reviews.llvm.org/D22438
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275921 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Previously we were doing 1 << S. "1" is an int, so this doesn't work
when S >= 32.
This patch also adds some static_asserts to these functions to ensure
that we don't hit UB by shifting left too much.
Reviewers: rnk
Subscribers: llvm-commits, dylanmckay
Differential Revision: https://reviews.llvm.org/D22441
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275719 91177308-0d34-0410-b5e6-96231b3b80d8
Doing "I++" inside of an EXPECT_* triggers
warning: expression with side effects has no effect in an unevaluated context
because EXPECT_* partially expands to
EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(i++)) == 1)>
which is an unevaluated context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275717 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This shift is undefined behavior (and, as compiled by clang, gives the
wrong answer for maxUIntN(64)).
Reviewers: mkuper
Subscribers: llvm-commits, jroelofs, rsmith
Differential Revision: https://reviews.llvm.org/D22430
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275656 91177308-0d34-0410-b5e6-96231b3b80d8
Block 1 and 2 of an MSF file are bit vectors that represent the
list of blocks allocated and free in the file. We had been using
these blocks to write stream data and other data, so we mark them
as the free page map now. We don't yet serialize these pages to
the disk, but at least we make a note of what it is, and avoid
writing random data to them.
Doing this also necessitated cleaning up some of the tests to be
more general and hardcode fewer values, which is nice.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275629 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we would read a PDB, then write some of it back out,
but write the directory, super block, and other pertinent metadata
back out unchanged. This generates incorrect PDBs since the amount
of data written was not always the same as the amount of data read.
This patch changes things to use the newly introduced `MsfBuilder`
class to write out a correct and accurate set of Msf metadata for
the data *actually* written, which opens up the door for adding and
removing type records, symbol records, and other types of data to
an existing PDB.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275627 91177308-0d34-0410-b5e6-96231b3b80d8
Doing "I++" inside of an EXPECT_* triggers
warning: expression with side effects has no effect in an unevaluated context
because EXPECT_* partially expands to
EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(MockObjects[I++] + 1)) == 1)>
which is an unevaluated context.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275293 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Normally when you do a bitwise operation on an enum value, you
get back an instance of the underlying type (e.g. int). But using this
macro, bitwise ops on your enum will return you back instances of the
enum. This is particularly useful for enums which represent a
combination of flags.
Suppose you have a function which takes an int and a set of flags. One
way to do this would be to take two numeric params:
enum SomeFlags { F1 = 1, F2 = 2, F3 = 4, ... };
void Fn(int Num, int Flags);
void foo() {
Fn(42, F2 | F3);
}
But now if you get the order of arguments wrong, you won't get an error.
You might try to fix this by changing the signature of Fn so it accepts
a SomeFlags arg:
enum SomeFlags { F1 = 1, F2 = 2, F3 = 4, ... };
void Fn(int Num, SomeFlags Flags);
void foo() {
Fn(42, static_cast<SomeFlags>(F2 | F3));
}
But now we need a static cast after doing "F2 | F3" because the result
of that computation is the enum's underlying type.
This patch adds a mechanism which gives us the safety of the second
approach with the brevity of the first.
enum SomeFlags {
F1 = 1, F2 = 2, F3 = 4, ..., F_MAX = 128,
LLVM_MARK_AS_BITMASK_ENUM(F_MAX)
};
void Fn(int Num, SomeFlags Flags);
void foo() {
Fn(42, F2 | F3); // No static_cast.
}
The LLVM_MARK_AS_BITMASK_ENUM macro enables overloads for bitwise
operators on SomeFlags. Critically, these operators return the enum
type, not its underlying type, so you don't need any static_casts.
An advantage of this solution over the previously-proposed BitMask class
[0, 1] is that we don't need any wrapper classes -- we can operate
directly on the enum itself.
The approach here is somewhat similar to OpenOffice's typed_flags_set
[2]. But we skirt the need for a wrapper class (and a good deal of
complexity) by judicious use of enable_if. We SFINAE on the presence of
a particular enumerator (added by the LLVM_MARK_AS_BITMASK_ENUM macro)
instead of using a traits class so that it's impossible to use the enum
before the overloads are present. The solution here also seamlessly
works across multiple namespaces.
[0] http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20150622/283369.html
[1] http://lists.llvm.org/pipermail/llvm-commits/attachments/20150623/073434b6/attachment.obj
[2] https://cgit.freedesktop.org/libreoffice/core/tree/include/o3tl/typed_flags_set.hxx
Reviewers: chandlerc, rsmith
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D22279
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275292 91177308-0d34-0410-b5e6-96231b3b80d8
Because of the goop involved in the EXPECT_EQ macro, we were getting the
following warning
expression with side effects has no effect in an unevaluated context
because the "I++" was being used inside of a template type:
switch (0) case 0: default: if (const ::testing::AssertionResult gtest_ar = (::testing::internal:: EqHelper<(sizeof(::testing::internal::IsNullLiteralHelper(Args[I++])) == 1)>::Compare("Args[I++]", "&A", Args[I++], &A))) ; else ::testing::internal::AssertHelper(::testing::TestPartResult::kNonFatalFailure, "../src/unittests/IR/FunctionTest.cpp", 94, gtest_ar.failure_message()) = ::testing::Message();
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275291 91177308-0d34-0410-b5e6-96231b3b80d8
PDBFile::getBlockData didn't really return any indication that it
failed. It merely returned an empty buffer.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275009 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This represents the adjustment applied to the implicit 'this' parameter
in the prologue of a virtual method in the MS C++ ABI. The adjustment is
always zero unless multiple inheritance is involved.
This increases the size of DISubprogram by 8 bytes, unfortunately. The
adjustment really is a signed 32-bit integer. If this size increase is
too much, we could probably win it back by splitting out a subclass with
info specific to virtual methods (virtuality, vindex, thisadjustment,
containingType).
Reviewers: aprantl, dexonsmith
Subscribers: aaboud, amccarth, llvm-commits
Differential Revision: http://reviews.llvm.org/D21614
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274325 91177308-0d34-0410-b5e6-96231b3b80d8
When concatenating two error lists the ErrorList::join method (which is called
by joinErrors) was failing to set the checked bit on the second error, leading
to a 'failure to check error' assertion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274249 91177308-0d34-0410-b5e6-96231b3b80d8
re-insertion of entries into the worklist moves them to the end.
This is fairly similar to a SetVector, but helps in the case where in
addition to not inserting duplicates you want to adjust the sequence of
a pop-off-the-back worklist.
I'm not at all attached to the name of this data structure if others
have better suggestions, but this is one that David Majnemer brought up
in IRC discussions that seems plausible.
I've trimmed the interface down somewhat from SetVector's interface
because several things make less sense here IMO: iteration primarily.
I'd prefer to add these back as we have users that need them. My use
case doesn't even need all of what is provided here. =]
I've also included a basic unittest to make sure this functions
reasonably.
Differential Revision: http://reviews.llvm.org/D21866
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274198 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an issue where occurrence counts would be unexpectedly
reset when parsing different parts of a command line multiple
times.
**ORIGINAL COMMIT MESSAGE**
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274171 91177308-0d34-0410-b5e6-96231b3b80d8
This allows command line tools to use syntaxes like the following:
llvm-foo.exe command1 -o1 -o2
llvm-foo.exe command2 -p1 -p2
Where command1 and command2 contain completely different sets of
valid options. This is backwards compatible with previous uses
of llvm cl which did not support subcommands, as any option
which specifies no optional subcommand (e.g. all existing
code) goes into a special "top level" subcommand that expects
dashed options to appear immediately after the program name.
For example, code which is subcommand unaware would generate
a command line such as the following, where no subcommand
is specified:
llvm-foo.exe -q1 -q2
The top level subcommand can co-exist with actual subcommands,
as it is implemented as an actual subcommand which is searched
if no explicit subcommand is specified. So llvm-foo.exe as
specified above could be written so as to support all three
aforementioned command lines simultaneously.
There is one additional "special" subcommand called AllSubCommands,
which can be used to inject an option into every subcommand.
This is useful to support things like help, so that commands
such as:
llvm-foo.exe --help
llvm-foo.exe command1 --help
llvm-foo.exe command2 --help
All work and display the help for the selected subcommand
without having to explicitly go and write code to handle each
one separately.
This patch is submitted without an example of anything actually
using subcommands, but a followup patch will convert the
llvm-pdbdump tool to use subcommands.
Reviewed By: beanz
Differential Revision: http://reviews.llvm.org/D21485
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274054 91177308-0d34-0410-b5e6-96231b3b80d8
tests will want different IR.
Wanted this when writing tests for the proposed CG update stuff, and
this is an easily separable piece.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273973 91177308-0d34-0410-b5e6-96231b3b80d8
The bitset metadata currently used in LLVM has a few problems:
1. It has the wrong name. The name "bitset" refers to an implementation
detail of one use of the metadata (i.e. its original use case, CFI).
This makes it harder to understand, as the name makes no sense in the
context of virtual call optimization.
2. It is represented using a global named metadata node, rather than
being directly associated with a global. This makes it harder to
manipulate the metadata when rebuilding global variables, summarise it
as part of ThinLTO and drop unused metadata when associated globals are
dropped. For this reason, CFI does not currently work correctly when
both CFI and vcall opt are enabled, as vcall opt needs to rebuild vtable
globals, and fails to associate metadata with the rebuilt globals. As I
understand it, the same problem could also affect ASan, which rebuilds
globals with a red zone.
This patch solves both of those problems in the following way:
1. Rename the metadata to "type metadata". This new name reflects how
the metadata is currently being used (i.e. to represent type information
for CFI and vtable opt). The new name is reflected in the name for the
associated intrinsic (llvm.type.test) and pass (LowerTypeTests).
2. Attach metadata directly to the globals that it pertains to, rather
than using the "llvm.bitsets" global metadata node as we are doing now.
This is done using the newly introduced capability to attach
metadata to global variables (r271348 and r271358).
See also: http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21053
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273729 91177308-0d34-0410-b5e6-96231b3b80d8
This change is motivated by an upcoming change to the metadata representation
used for CFI. The indirect function call checker needs type information for
external function declarations in order to correctly generate jump table
entries for such declarations. We currently associate such type information
with declarations using a global metadata node, but I plan [1] to move all
such metadata to global object attachments.
In bitcode, metadata attachments for function declarations appear in the
global metadata block. This seems reasonable to me because I expect metadata
attachments on declarations to be uncommon. In the long term I'd also expect
this to be the case for CFI, because we'd want to use some specialized bitcode
format for this metadata that could be read as part of the ThinLTO thin-link
phase, which would mean that it would not appear in the global metadata block.
To solve the lazy loaded metadata issue I was seeing with D20147, I use the
same bitcode representation for metadata attachments for global variables as I
do for function declarations. Since there's a use case for metadata attachments
in the global metadata block, we might as well use that representation for
global variables as well, at least until we have a mechanism for lazy loading
global variables.
In the assembly format, the metadata attachments appear after the "declare"
keyword in order to avoid a parsing ambiguity.
[1] http://lists.llvm.org/pipermail/llvm-dev/2016-June/100462.html
Differential Revision: http://reviews.llvm.org/D21052
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273336 91177308-0d34-0410-b5e6-96231b3b80d8
We recently made MemorySSA own the walker it creates. As a part of this,
the MSSA test fixture was changed to have a `Walker*` instead of a
`unique_ptr<Walker>`. So, we no longer need to do `&*Walker` in order to
get a `Walker*`.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273189 91177308-0d34-0410-b5e6-96231b3b80d8
pass manager passes' `run` methods.
This removes a bunch of SFINAE goop from the pass manager and just
requires pass authors to accept `AnalysisManager<IRUnitT> &` as a dead
argument. This is a small price to pay for the simplicity of the system
as a whole, despite the noise that changing it causes at this stage.
This will also helpfull allow us to make the signature of the run
methods much more flexible for different kinds af passes to support
things like intelligently updating the pass's progression over IR units.
While this touches many, many, files, the changes are really boring.
Mostly made with the help of my trusty perl one liners.
Thanks to Sean and Hal for bouncing ideas for this with me in IRC.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272978 91177308-0d34-0410-b5e6-96231b3b80d8
Current implementation leaves the object in an invalid state.
This reverts commit bf0c389ac683cd6c0e5959b16537e59e5f4589e3.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272965 91177308-0d34-0410-b5e6-96231b3b80d8
undef uses are no real uses of a register and must be ignored by
findLastUseBefore() so that handleMove() does not produce invalid live
intervals in some cases.
This fixed http://llvm.org/PR28083
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272446 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes an alignment issue by forcing all cached allocations
to be 8 byte aligned, and also fixes an issue arising on big
endian systems by writing ulittle32_t's instead of uint32_t's
in the test.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272437 91177308-0d34-0410-b5e6-96231b3b80d8
This adds method and tests for writing to a PDB stream. With
this, even a PDB stream which is discontiguous can be treated
as a sequential stream of bytes for the purposes of writing.
Reviewed By: ruiu
Differential Revision: http://reviews.llvm.org/D21157
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272369 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now DISubroutineType has a 'cc' field which should be a DW_CC_ enum. If
it is present and non-zero, the backend will emit it as a
DW_AT_calling_convention attribute. On the CodeView side, we translate
it to the appropriate enum for the LF_PROCEDURE record.
I added a new LLVM vendor specific enum to the list of DWARF calling
conventions. DWARF does not appear to attempt to standardize these, so I
assume it's OK to do this until we coordinate with GCC on how to emit
vectorcall convention functions.
Reviewers: dexonsmith, majnemer, aaboud, amccarth
Subscribers: mehdi_amini, llvm-commits
Differential Revision: http://reviews.llvm.org/D21114
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272197 91177308-0d34-0410-b5e6-96231b3b80d8
