Previously, gtest/gtest_main were not exported via cmake. The intention here was
to ensure that users whom are linking against the LLVM install tree would not
get the gtest/gtest_main targets. This prevents downstream projects that link
against the LLVM build tree (i.e. Swift) from getting this dependency
information in their cmake builds. Without such dependency information, linker
issues can result on linux due to LLVMSupport being put before gtest on the
linker command line.
This commit preserves behavior that we want for the install tree, while adding
support for the build tree by:
1. The special casing for gtest/gtest_main in the add_llvm_library code is
removed in favor of a flag called "BUILDTREE_ONLY". If this is set, then the
library is communicating that it is only meant to be exported into the build
tree and is not meant to be installed or exported via the install tree. This
part is just a tweak to remove the special case, the underlying code is the
same.
2. The cmake code that exports cmake targets for the build tree has special code
to import an additional targets file called
LLVMBuildTreeOnlyExports.cmake. Additionally the extra targets are added to the
LLVMConfig.cmake's LLVM_EXPORTED_TARGETS variable. In contrast, the
"installation" cmake file uses the normal LLVM_EXPORTS_TARGETS as before and
does not include the extra exports file. This is implemented by
defining/undefining variables when performing a configure of the build/install
tree LLVMConfig.cmake files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281085 91177308-0d34-0410-b5e6-96231b3b80d8
This cleanup removes the need for the native support library to have its own target. That target was only needed because makefile builds were tripping over each other if two tablegen targets were building at the same time. This causes problems because the parallel make invocations through CMake can't communicate with each other. This is fixed by invoking make directly instead of through CMake which is how we handle this in External Project invocations.
The other part of the cleanup is to mark the custom commands as USES_TERMINAL. This is a bit of a hack, but we need to ensure that Ninja generators don't invoke multiple tablegen targets in the same build dir in parallel, because that too would be bad.
Marking as USES_TERMINAL does have some downside for Ninja because it results in decreased parallelism, but correct builds are worth the minor loss and LLVM_OPTIMZIED_TABLEGEN is such a huge win, it is worth it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280748 91177308-0d34-0410-b5e6-96231b3b80d8
This adds a copy of the demangler in libcxxabi.
The code also has no dependencies on anything else in LLVM. To enforce
that I added it as another library. That way a BUILD_SHARED_LIBS will
fail if anyone adds an use of StringRef for example.
The no llvm dependency combined with the fact that this has to build
on linux, OS X and Windows required a few changes to the code. In
particular:
No constexpr.
No alignas
On OS X at least this library has only one global symbol:
__ZN4llvm16itanium_demangleEPKcPcPmPi
My current plan is:
Commit something like this
Change lld to use it
Change lldb to use it as the fallback
Add a few #ifdefs so that exactly the same file can be used in
libcxxabi to export abi::__cxa_demangle.
Once the fast demangler in lldb can handle any names this
implementation can be replaced with it and we will have the one true
demangler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280732 91177308-0d34-0410-b5e6-96231b3b80d8
That is, add build system support for building the OCaml bindings
against preinstalled LLVM libraries. This is important for package
managers such as OPAM, because OCaml libraries need to be built
against a specific OCaml compiler installation.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280642 91177308-0d34-0410-b5e6-96231b3b80d8
This is a partial revert of r280013. Brad King pointed out these variable names are matching CMake conventions, so we should preserve them.
I've also added a direct mapping of the LLVM_*_DIR variables which we need to make projects support building in and out of tree.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280380 91177308-0d34-0410-b5e6-96231b3b80d8
With the runtimes build we're trying to use LLVMConfig.cmake as a way of providing LLVM_* variables that are needed to behave as if the project is building in tree. To make this work we need to rename two variables by dropping the "S" from the end. This makes the variables match the in-tree names.
This renames:
LLVM_INCLUDE_DIRS -> LLVM_INCLUDE_DIR
LLVM_LIBRARY_DIRS -> LLVM_LIBRARY_DIR
The versions ending in S are not used in-tree anywhere. This also cleans up LLVM_LIBRARY_DIR being set to the same value with and without the "S".
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@280013 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Install CheckAtomic.cmake along with other LLVM modules, therefore making it possible for other projects to use it. This file is needed for LLDB to be built standalone, and installing it was suggested in https://reviews.llvm.org/D23881.
Patch by: Michał Górny
Reviewers: krytarowski, zturner, eugenis, jyknight, labath, beanz
Subscribers: beanz, llvm-commits
Differential Revision: https://reviews.llvm.org/D23887
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279777 91177308-0d34-0410-b5e6-96231b3b80d8
The subproject interface being used for runtime libraries expects that llvm-config is passed into the subproject for consumption. We currently do this for every subproject, so we should expect that all LLVM ExternalProjects depend on llvm-config for the time being.
Eventually I'd like to see the sub-projects using LLVMConfig.cmake instead of the llvm-config binary, but that will take time to roll out.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279155 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
To build llgo, you must currently ensure that llgo
is in the tools/llgo directory, due to a hard-coded
path in llvm-go.
To support the use of LLVM_EXTERNAL_LLGO_SOURCE_DIR,
we introduce a flag to llvm-go that enables the
caller to specify the paths to symlink in the
temporary $GOPATH.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D21634
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276829 91177308-0d34-0410-b5e6-96231b3b80d8
Given similar reasons from r276710, ld64 scrubs DYLD_* environment if
called from the shim executable /usr/bin/ld.
Add support for finding ld64 via xcrun.
This is needed in order to get LIT to have the full path to the ld4
executable.
Differential Revision: https://reviews.llvm.org/D22791
rdar://problem/24300926
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276781 91177308-0d34-0410-b5e6-96231b3b80d8
With in-tree builds we can get Output directories scattered among our
tests. Recursing into those to find tests doesn't make sense.
Thanks to nlewycky for noticing this!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276667 91177308-0d34-0410-b5e6-96231b3b80d8
This makes sure that space is actually available. With this change
running lld on a full file system causes it to exit with
failed to open foo: No space left on device
instead of crashing with a sigbus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@276017 91177308-0d34-0410-b5e6-96231b3b80d8
This option is the equivalent option to LLVM_BUILD_TOOLS but for executables
created via add_llvm_utility.
This is a useful tool for improving compile time in situations where LLVM is
used as a library and no testing tools are needed.
It follows the exact same implemention model as LLVM_BUILD_TOOLS.
Since the option is by default set to on, no behavior is changed unless one sets
it from the command line to be false.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275007 91177308-0d34-0410-b5e6-96231b3b80d8
export_executable_symbols looks though the link libraries of the executable in
order to figure out transitive dependencies, but in doing so it assumes that
all link libraries are also targets. This is not true as of r273302, so adjust
it to check if they actually are targets.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274546 91177308-0d34-0410-b5e6-96231b3b80d8
Previously out-of-tree passes could detect if LLVM was built with
LLVM_BUILD_32_BITS by looking for -m32 in LLVM_DEFINITIONS, but as of r271871
it no longer appears there. Resolve this by instead emitting LLVM_BUILD_32_BITS
in LLVMConfig so it can be checked for directly.
Differential Revision: http://reviews.llvm.org/D21434
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274351 91177308-0d34-0410-b5e6-96231b3b80d8
This flag is only effective in builds with debug info and modules.
The default is On for Darwin only.
rdar://problem/27019000
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274244 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 3db82f646a0890eb7664d0351b5a3c79622e8bef.
Vassil already fixed this and I mechanically undid his fix without looking
too close at what I'm actually doing. Need more coffee.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274242 91177308-0d34-0410-b5e6-96231b3b80d8
On Darwin it is currently impossible to build LLVM with modules
because the Darwin system module map is not compatible with
-fmodules-local-submodule-visibility at this point in time. This
patch makes the flag optional and off by default on Darwin so it
becomes possible to build LLVM with modules again.
http://reviews.llvm.org/D21827
rdar://problem/27019000
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274196 91177308-0d34-0410-b5e6-96231b3b80d8
This matches more closely the rest of the variables in LLVMConfig.cmake which
shed the _CONFIG_ part of their names.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@274175 91177308-0d34-0410-b5e6-96231b3b80d8
This is just a small step in the direction of making LLVMConfig.cmake a complete
replacement for llvm-config.
For those unfamiliar, llvm-config --build-mode prints out CMAKE_BUILD_TYPE. Thus
as one can imagine, LLVM_BUILD_TYPE is @CMAKE_BUILD_TYPE@.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273782 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
There are a few LLVM projects that produce runtime libraries. Ideally
runtime libraries should be built differently than other projects,
specifically they should be built using the just-built toolchain.
There is support for building compiler-rt in this way from the clang
build. Moving this logic into the LLVM build is interesting because it
provides a simpler way to extend the just-built toolchain to include
LLD and the LLVM object file tools.
Once this functionality is better fleshed out and tested we’ll want to
encapsulate it in a module that can be used for clang standalone
builds, and we’ll want to make it the default way to build compiler-rt.
With this patch applied there is no immediate change in the build.
Moving compiler-rt out from llvm/projects into llvm/runtimes enables
the functionality.
This code has a few improvements over the method provided by
LLVM_BUILD_EXTERNAL_COMPILER_RT. Specifically the sub-ninja command is
always invoked, so changes to compiler-rt source files will get built
properly, so this patch can be used for iterative development with
just-built tools.
This first patch only works with compiler-rt. Support for other
runtime projects will be coming in follow-up patches.
Reviewers: chandlerc, bogner
Subscribers: kubabrecka, llvm-commits
Differential Revision: http://reviews.llvm.org/D20992
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273620 91177308-0d34-0410-b5e6-96231b3b80d8
Patch by Nitesh Jain.
Summary: On some target like MIPS32 we need to explicitly link atomic library for 64 bit atomic operations. This module then can be used in LLDB (http://reviews.llvm.org/D20464) or Libcxx (http://reviews.llvm.org/D16613) for explicitly link to atomic library.
Reviewers: chandlerc, beanz
Differential: reviews.llvm.org/D20896
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273534 91177308-0d34-0410-b5e6-96231b3b80d8
LLVMConfig.cmake needs to set LLVM_BINARY_DIR differently based on whether or not it is the build directory or the install directory. The build directory just needs to set the value from the configuration, the install directory needs to set it to the install prefix.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273479 91177308-0d34-0410-b5e6-96231b3b80d8
After r273302 LLVM_SYSTEM_LIBS may have entries that already have
-l prefix and we need to deal with that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@273333 91177308-0d34-0410-b5e6-96231b3b80d8
All the ExternalProject features in use here are supported by CMake 3.4.3, so we don't need these version checks anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272327 91177308-0d34-0410-b5e6-96231b3b80d8
This is the more-correct fix to out-of-tree building. AddLLVM.cmake relies on this variable being set, so we should make sure it is set in LLVMConfig.cmake.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272279 91177308-0d34-0410-b5e6-96231b3b80d8
cmake 3.4 introduced LIST_DIRECTORIES to glob recurse, which can be
used to simplify this code greatly.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272217 91177308-0d34-0410-b5e6-96231b3b80d8
This was called out on the list a long time ago and just got pointed out to me again. Need to fix it before I forget.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272201 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds a new option LLVM_TOOLS_INSTALL_DIR which allows customizing the location executables and symlinks get installed to. This adds the functionality provided by autoconf's --bindir flag.
This patch is based on patches from and collaboration with Tony Kelman, and replaces http://reviews.llvm.org/D20934.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272200 91177308-0d34-0410-b5e6-96231b3b80d8
