Also refactor the existing OProfile profiling code to reuse the same interfaces with the VTune profiling code.
In addition, unit tests for the profiling interfaces were added.
This patch was prepared by Andrew Kaylor and Daniel Malea, and reviewed in the llvm-commits list by Jim Grosbach
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@152620 91177308-0d34-0410-b5e6-96231b3b80d8
Clang builds. The detection logic for compilers that support the warning
isn't working. Rafael is going to investigate it, but didn't want people
to have to wade through build spam until then.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@151649 91177308-0d34-0410-b5e6-96231b3b80d8
This is useful for clients that want to maintain compatibility
across multiple releases of LLVM. Currently users like Klee and
Mesa all have to roll their own 'parse llvm-config --version
output and generate defines' solution.
Also reuse the new macros so that version information is less
redundant/likely to fall out of sync again in the future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@150405 91177308-0d34-0410-b5e6-96231b3b80d8
that just uses the new toolchain probing logic. This fixes linking with -m32 on
64 bit systems (the /32 dir was not being added to the search).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149651 91177308-0d34-0410-b5e6-96231b3b80d8
The CMake build already generated one. Follows clang r149497.
This brings us one step closer to compiling and configuring clang
separately from LLVM using the autoconf build, too.
(I lack the right version of autoconf et al. to regen, but it
was a simple change, so I just updated configure manually.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@149498 91177308-0d34-0410-b5e6-96231b3b80d8
Get back getHostTriple.
For JIT compilation, use the host triple instead of the default
target: this fixes some JIT testcases that used to fail when the
compiler has been configured as a cross compiler.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@147542 91177308-0d34-0410-b5e6-96231b3b80d8
Original commit message:
llvm-config: Replace with C++ version (was llvm-config-2).
- Reapply of r144300, with lots of fixes/migration easement in between.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145582 91177308-0d34-0410-b5e6-96231b3b80d8
Some files installed by clang are not relevant for general users and we'd like
to be able to install them to a different location. This adds a new
--with-internal-prefix configure option and a corresponding PROJ_internal_prefix
makefile variable, which defaults to the standard prefix. A tool makefile
can specify that it should be installed to this internal prefix by defining
INTERNAL_TOOL.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@145234 91177308-0d34-0410-b5e6-96231b3b80d8
The problems that llvmc solved have largely been subsumed with the
tasks that the clang driver can accomplish, but llvmc lacks flexibility
and depends too heavily on the EOL'd llvm-gcc.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@140093 91177308-0d34-0410-b5e6-96231b3b80d8
of the original check meant that configure was caching the default
CC check and using that instead of the result of AC_PROG_CC in both
configure checks and during compilation.
This wasn't affecting C++ so it was hard to notice.
Regenerate configure.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@139937 91177308-0d34-0410-b5e6-96231b3b80d8
The motivation to do that:
1. Now, llvm would use the stock config.sub. Before that we had an
uncommitted FreeBSD-related patch. Now, it has been upstreamed and
comes back. It means that it would be easier to update these files in
the next time (less magic knowledge)
2. Fix a typo for pseudo-CPUs: 32e[lb] -> [lb]e32, 64e[lb]->[lb]64.
One of these CPUs is used for PNaCl and it was not really convenient
to have a CPU that starts with a digit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138323 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support of NativeClient (*-*-nacl) OS support to LLVM.
It's already supported in autoconf/config.sub.
The motivation for this change is to start upstreaming PNaCl work. The
whole set of patches include llvm backends (i686, x86_64, ARM),
llvm-gcc (probably, would not be upstreamed because it's deprecated)
and clang (the work has been just started, the amount of changes is
going to be low and the most of the work is expected to be done close
to the mainline).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@138005 91177308-0d34-0410-b5e6-96231b3b80d8
Stefanovic. I removed the part that actually emits the instructions cause
I want that to get in better shape first and in incremental steps. This
also makes it easier to review the upcoming parts.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135678 91177308-0d34-0410-b5e6-96231b3b80d8
(including compilation, assembly). Move relocation model Reloc::Model from
TargetMachine to MCCodeGenInfo so it's accessible even without TargetMachine.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@135468 91177308-0d34-0410-b5e6-96231b3b80d8
For some reason this was not reverted when r103213 was.
At the same time, add an optional rule for clang's doxygen.cfg.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@131279 91177308-0d34-0410-b5e6-96231b3b80d8
AC_CHECK_FUNCS seeks a symbol only in libs. We should check the declaration in string.h.
FIXME: I have never seen mingw(s) have strerror_s() (not _strerror_s()).
FIXME: Autoconf/CMake may seek strerror_s() with the definition MINGW_HAS_SECURE_API in future.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@125172 91177308-0d34-0410-b5e6-96231b3b80d8
config.h.* have conditions whether each symbol is defined or not.
Autoconf and CMake may check symbols in libgcc.a for JIT on Mingw.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@124950 91177308-0d34-0410-b5e6-96231b3b80d8
succeed. Also make the testcase clearer as to what we're doing and
emit a checking notification to the log.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@121101 91177308-0d34-0410-b5e6-96231b3b80d8
LLVMGCC_DISABLEOPT_FLAGS, one with CC in it, the other
with GCC. Rename LLVMGCC_DISABLEOPT_FLAGS to
LLVMCC_DISABLEOPT_FLAGS.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@120151 91177308-0d34-0410-b5e6-96231b3b80d8
looking for lib/Target/*AsmPrinter.cpp. Fix llvm-config to handle targets
that don't have an explicit AsmPrinter library.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@119057 91177308-0d34-0410-b5e6-96231b3b80d8
Store the flags needed to disable optimizations and to emit LLVM-IR depending on
the version of llvm-gcc used.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@118684 91177308-0d34-0410-b5e6-96231b3b80d8
Update the cmake and autoconf build system to compile polly
as a shared library if it is checked out into tools/polly. In case
polly is not checked out, nothing changes.
This models the way clang can be added to llvm if checked out to tools/clang.
Also rebuild configure.
Patch contributed by ether.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@117755 91177308-0d34-0410-b5e6-96231b3b80d8
strange packaging environments. The primary result of this is to expose
a (normally empty) CLANG_RESOURCE_DIR string in the autoconf and CMake builds.
This will in turn be used by a subsequent commit to Clang.
Regenerated configure and config.h.in thanks to Nick. =D
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@116802 91177308-0d34-0410-b5e6-96231b3b80d8
been MC-ized for assembly printing. MSP430 is mostly so, but still has the
asm printer and lowering code in the printer subdir for the moment.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@115360 91177308-0d34-0410-b5e6-96231b3b80d8
that like to randomly define things like "X86", regenerate autoconf bits
and update cmake.
Fixes PR7852.
Patch by Xerxes Rånby!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@112499 91177308-0d34-0410-b5e6-96231b3b80d8
- Disables 'Built on ...' in 'foo --version'.
- Disables timestamps from being embedded into .dir files.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103423 91177308-0d34-0410-b5e6-96231b3b80d8
NOTE: 2nd part changeset for cfe trunk to follow.
*** PRE-PATCH ISSUES ADDRESSED
- clang api docs fail build from objdir
- clang/llvm api docs collide in install PREFIX/
- clang/llvm main docs collide in install
- clang/llvm main docs have full of hard coded destination
assumptions and make use of absolute root in static html files;
namely CommandGuide tools hard codes a website destination
for cross references and some html cross references assume
website root paths
*** IMPROVEMENTS
- bumped Doxygen from 1.4.x -> 1.6.3
- splits llvm/clang docs into 'main' and 'api' (doxygen) build trees
- provide consistent, reliable doc builds for both main+api docs
- support buid vs. install vs. website intentions
- support objdir builds
- document targets with 'make help'
- correct clean and uninstall operations
- use recursive dir delete only where absolutely necessary
- added call function fn.RMRF which safeguards against botched 'rm -rf';
if any target (or any variable is evaluated) which attempts
to remove any dirs which match a hard-coded 'safelist', a verbose
error will be printed and make will error-stop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@103213 91177308-0d34-0410-b5e6-96231b3b80d8
gets placed inside a main function, and should not itself be a main
function. This is silently hidden in GCC-hosted builds because the
inner main looks like a nested function declaration, which GCC supports.
In builds with compilers which do not support nested functions (by default),
this was causing an error, which caused these autoconf checks to fail,
leaving their options disabled.
This fixes test/Feature/load_module.ll on x86_64-unknown-linux-gnu
llvm-gcc selfhost builds, among other things.
This also includes a regenerated configure, as the diff is small and telling.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@102288 91177308-0d34-0410-b5e6-96231b3b80d8
in r86005 and unintentionally changed the default from -O3 to -O2.
- It's odd the things automated perf testing turns up! :)
- Also, the configure diff is messed up slightly. It looks like someone either
didn't regenerate configure correctly (or I didn't), or autoconf has some
funnyness in it. Eric, any ideas?
This has been at -O2 for so long, that I am slightly nervous that this change
will uncover miscompiles of LLVM on other systems. If that is the case, I think
we should just set the default universally at -O3, and let developers/vendors
use -O3 if they want it and have tested it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@100941 91177308-0d34-0410-b5e6-96231b3b80d8
now configures prerequisite projects individually but also ignores them in the
big project switch statement to avoid the incorrect warning.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@99506 91177308-0d34-0410-b5e6-96231b3b80d8
projects rely upon llvm-gcc, the LLVM test suite, and poolalloc. This ensures
that the aforementioned projects have their object trees created first so that
other projects can find their object trees when they themselves are configured.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@98998 91177308-0d34-0410-b5e6-96231b3b80d8
Comes in two parts:
1. Use --with-clang=path/to/clang/compiler to select an installed clang, or
--with-built-clang to have the makefiles use the clang which will be built
as the LLVM capable compiler. If neither is given, --with-built-clang will
be used if the Clang sources are checked out into the standard location
(tools/clang).
2. Use --with-llvmcc={llvm-gcc,clang,none} to specify which LLVM capable
compiler to use. If not given, then llvm-gcc will be used if available,
otherwise Clang.
Makefile support still to come.
Eric, Doug, Chris, seem reasonable?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96934 91177308-0d34-0410-b5e6-96231b3b80d8
--enable-shared configure flag to have the tools linked shared. (2.7svn is just
$(LLVMVersion) so it'll change to "2.7" in the release.) Always link the
example programs shared to test that the shared library keeps working.
On my mac laptop, Debug libLLVM2.7svn.dylib is 39MB, and opt (for example) is
16M static vs 440K shared.
Two things are less than ideal here:
1) The library doesn't include any version information. Since we expect to break
the ABI with every release, this shouldn't be much of a problem. If we do
release a compatible 2.7.1, we may be able to hack its library to work with
binaries compiled against 2.7.0, or we can just ask them to recompile. I'm
hoping to get a real packaging expert to look at this for the 2.8 release.
2) llvm-config doesn't yet have an option to print link options for the shared
library. I'll add this as a subsequent patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@96559 91177308-0d34-0410-b5e6-96231b3b80d8
setenv(). This patch just disables the test rather than getting putenv() to
work. Thanks to Sandeep Patel for reporting the problem.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82797 91177308-0d34-0410-b5e6-96231b3b80d8
same effect that "host-only" used to have, but can be combined with other
targets. host-only is still available as a synonym but no longer documented.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@82634 91177308-0d34-0410-b5e6-96231b3b80d8
that all the Makefiles changed mode.
Fix this by tellint install-sh to chmod
only to 0644, these are not executable files after all!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80371 91177308-0d34-0410-b5e6-96231b3b80d8
A include/llvm/ADT/iterator.cmake
U autoconf/configure.ac
--- Reverse-merging r80161 into '.':
U cmake/config-ix.cmake
--- Reverse-merging r80171 into '.':
U Makefile
--- Reverse-merging r80173 into '.':
U configure
U include/llvm/Config/config.h.in
--- Reverse-merging r80180 into '.':
A include/llvm/ADT/iterator.h.in
Despite common miscomceptions, iterator.h is alive and well. It broke the build
bots for several hours. And yet no one bothered to look at them.
Gabor and Doug, please review your changes and make sure that they actually
build before resubmitting them.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@80197 91177308-0d34-0410-b5e6-96231b3b80d8
Note that configure was edited by hand. Will somebody with the correct version of autoconf please regenerate?
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@77898 91177308-0d34-0410-b5e6-96231b3b80d8
initialization of all targets (InitializeAllTargets.h) or assembler
printers (InitializeAllAsmPrinters.h). This is a step toward the
elimination of relinked object files, so that we can build normal
archives.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@73543 91177308-0d34-0410-b5e6-96231b3b80d8
mutex support. LLVM_MULTITHREADED indicates (or will indicate) the ability to run LLVM itself across multiple threads, and requires atomics support.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72140 91177308-0d34-0410-b5e6-96231b3b80d8
disable building LLVM in thread-safe mode and print a nice warning.
Regenerate configure for these changes.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@72075 91177308-0d34-0410-b5e6-96231b3b80d8
