Pre-commit for D59363 (Add icmp UNDEF handling to SelectionDAG::FoldSetCC)
Approved by @efriedma (Eli Friedman)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356252 91177308-0d34-0410-b5e6-96231b3b80d8
The kernel currently has a limit for # of types to be 64KB and
the size of string subsection to be 64KB. A simple bcc tool
runqlat.py generates:
. the size of ~33KB type section, roughly ~10K types
. the size of ~17KB string section
The majority type is from the types referenced by local
variables in the bpf program. For example, the kernel "task_struct"
itself recursively brings in ~900 other types.
This patch did the following optimization to avoid generating
unused types:
. do not generate types for local variables unless they are
function arguments.
. do not generate types for external globals.
If an external global is not used in the program, llvm
already removes it from IR, so global variable saving is
typical small. For runqlat.py, only one variable "llvm.used"
is the external global.
The types for locals and external globals can be added back
once there is a usage for them.
After the above optimization, the runqlat.py generates:
. the size of ~1.5KB type section, roughtly 500 types
. the size of ~0.7KB string section
UPDATE:
resubmitted the patch after previous revert with
the following fix:
use Global.hasExternalLinkage() to test "external"
linkage instead of using Global.getInitializer(),
which will assert on external variables.
Signed-off-by: Yonghong Song <yhs@fb.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356234 91177308-0d34-0410-b5e6-96231b3b80d8
The kernel currently has a limit for # of types to be 64KB and
the size of string subsection to be 64KB. A simple bcc tool
runqlat.py generates:
. the size of ~33KB type section, roughly ~10K types
. the size of ~17KB string section
The majority type is from the types referenced by local
variables in the bpf program. For example, the kernel "task_struct"
itself recursively brings in ~900 other types.
This patch did the following optimization to avoid generating
unused types:
. do not generate types for local variables unless they are
function arguments.
. do not generate types for external globals.
If an external global is not used in the program, llvm
already removes it from IR, so global variable saving is
typical small. For runqlat.py, only one variable "llvm.used"
is the external global.
The types for locals and external globals can be added back
once there is a usage for them.
After the above optimization, the runqlat.py generates:
. the size of ~1.5KB type section, roughtly 500 types
. the size of ~0.7KB string section
Signed-off-by: Yonghong Song <yhs@fb.com>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356232 91177308-0d34-0410-b5e6-96231b3b80d8
This isn't necessary according to the DWARF standard, but it matches the
.eh_frame sections emitted by other tools in practice, and the Android
libunwindstack rejects .eh_frame sections where an FDE refers to a CIE
other than the closest previous CIE. So match the other tools and also
sort accordingly.
I consider this a bug in libunwindstack, but it's easy enough to emit
a compatible .eh_frame section for compatibility with installed
operating systems.
Differential Revision: https://reviews.llvm.org/D58266
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356216 91177308-0d34-0410-b5e6-96231b3b80d8
This has been a very painful missing feature that has made producing
reduced testcases difficult. In particular the various registers
determined for stack access during function lowering were necessary to
avoid undefined register errors in a large percentage of
cases. Implement a subset of the important fields that need to be
preserved for AMDGPU.
Most of the changes are to support targets parsing register fields and
properly reporting errors. The biggest sort-of bug remaining is for
fields that can be initialized from the IR section will be overwritten
by a default initialized machineFunctionInfo section. Another
remaining bug is the machineFunctionInfo section is still printed even
if empty.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356215 91177308-0d34-0410-b5e6-96231b3b80d8
This adds instruction selection support for G_UADDO on s32s and s64s.
Also
- Add an instruction selection test
- Update the arm64-xaluo.ll test to show that we generate the correct assembly
Differential Revision: https://reviews.llvm.org/D58734
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356214 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for inserting elements into packed vectors. It also adds
two tests: one for selection, and one for regbank select.
Unpacked vectors will come in a follow-up.
Differential Revision: https://reviews.llvm.org/D59325
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356182 91177308-0d34-0410-b5e6-96231b3b80d8
Building on the work done in D57601, now that we can distinguish between atomic and volatile memory accesses, go ahead and allow code motion of unordered atomics. As seen in the diffs, this allows much better folding of memory operations into using instructions. (Mostly done by the PeepholeOpt pass.)
Note: I have not reviewed all callers of hasOrderedMemoryRef since one of them - isSafeToMove - is very widely used. I'm relying on the documented semantics of each method to judge correctness.
Differential Revision: https://reviews.llvm.org/D59345
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356170 91177308-0d34-0410-b5e6-96231b3b80d8
These instructions used to use rotl with a bitwidth-1 immediate. I changed the immediate to 1,
but failed to change the opcode.
Thankfully this seems to have not caused a functional issue because we now had two rotl by 1 patterns,
but the correct ones were earlier and took priority. So we just missed some optimization.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356164 91177308-0d34-0410-b5e6-96231b3b80d8
This is consistent with what SelectionDAG does and is much easier to
work with than the extract sequence with an artificial wide register.
For the AMDGPU control flow intrinsics, this was producing an s128 for
the i64, i1 tuple return. Any legalization that should apply to a real
s128 value would badly obscure the direct values that need to be seen.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356147 91177308-0d34-0410-b5e6-96231b3b80d8
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356144 91177308-0d34-0410-b5e6-96231b3b80d8
When choosing whether a pair of loads can be combined into a single
wide load, we check that the load only has a sext user and that sext
also only has one user. But this can prevent the transformation in
the cases when parallel macs use the same loaded data multiple times.
To enable this, we need to fix up any other uses after creating the
wide load: generating a trunc and a shift + trunc pair to recreate
the narrow values. We also need to keep a record of which loads have
already been widened.
Differential Revision: https://reviews.llvm.org/D59215
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356132 91177308-0d34-0410-b5e6-96231b3b80d8
Add a caller which exhausts regs then calls another function. This allows
getCalleePreservedRegs to be tested.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356122 91177308-0d34-0410-b5e6-96231b3b80d8
Prior to the introduction of funnel shift intrinsics we could count on rotate
by immediates prefering to use rotl since that's what MatchRotate would check
first. The or+shift pattern doesn't have a direction so one must be chosen
arbitrarily.
With funnel shift, there is a direction and fshr will try to use rotr first.
While fshl will try to use rotl first.
This patch adds the isel patterns for rotr to complement the rotl patterns. I've
put the rotr by 1 patterns in the instruction patterns. And moved the rotl by
bitwidth-1 patterns to separate Pat patterns.
Fixes PR41057.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356121 91177308-0d34-0410-b5e6-96231b3b80d8
getConstantVRegVal used to only look for G_CONSTANT when looking at
unboxing the value of a vreg. However, constants are sometimes not
directly used and are hidden behind trunc, s|zext or copy chain of
computation.
In particular this may be introduced by the legalization process that
doesn't want to simplify these patterns because it can lead to infine
loop when legalizing a constant.
To circumvent that problem, add a new variant of getConstantVRegVal,
named getConstantVRegValWithLookThrough, that allow to look through
extensions.
Differential Revision: https://reviews.llvm.org/D59227
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356116 91177308-0d34-0410-b5e6-96231b3b80d8
I found these by asserting in clang for any GCCBuiltin that doesn't
require mangling and requires a constant for the builtin. This means
that intrinsics are missing which don't use GCCBuiltin, don't have
builtins defined in clang, or were missing the constant annotation in
the builtin definition.
I'm not sure what's going on with the immediates.ll test. It seems to
be intended to test invalid cases like this, but then tries to handle
some of them anyway. I've moved the cases that were inconsistent with
the GCCBuiltin definition so they don't test the codegen anymore.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356085 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356081 91177308-0d34-0410-b5e6-96231b3b80d8
The feature flag alone can't be trusted since it can be passed via -mattr. Need to ensure 64-bit mode as well.
We had a 64 bit mode check on the instruction to make the assembler work correctly. But we weren't guarding any of our lowering code or the hooks for the AtomicExpandPass.
I've added 32-bit command lines to atomic128.ll with and without cx16. The tests there would all previously fail if -mattr=cx16 was passed to them. I had to move one test case for f128 to a new file as it seems to have a different 32-bit mode or possibly sse issue.
Differential Revision: https://reviews.llvm.org/D59308
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356078 91177308-0d34-0410-b5e6-96231b3b80d8
Because we don't currently simplify icmp with undef in DAG, bugpoint loves to introduce them during reduction.
This is a small step towards re-adding non-undef values into some of the simpler tests so that they should still test correctly and emit similar/same codegen.
Prep work for PR40800 ([SelectionDAG] Add UNDEF handling to SelectionDAG::FoldSetCC).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356076 91177308-0d34-0410-b5e6-96231b3b80d8
rL356068 caused some minor re-orderings. Regenerate legalize-fneg.ll to
reflect this, and remove the NOLIB check lines (they're redundant given that
the RV32I and RV64I check lines generated by update_llc_test_checks.py already
demonstrate there is no libcall).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356074 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
A number of optimizations are inhibited by single-use TokenFactors not
being merged into the TokenFactor using it. This makes we consider if
we can do the merge immediately.
Most tests changes here are due to the change in visitation causing
minor reorderings and associated reassociation of paired memory
operations.
CodeGen tests with non-reordering changes:
X86/aligned-variadic.ll -- memory-based add folded into stored leaq
value.
X86/constant-combiners.ll -- Optimizes out overlap between stores.
X86/pr40631_deadstore_elision -- folds constant byte store into
preceding quad word constant store.
Reviewers: RKSimon, craig.topper, spatel, efriedma, courbet
Reviewed By: courbet
Subscribers: dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, eraman, hiraditya, kbarton, jrtc27, atanasyan, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59260
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356068 91177308-0d34-0410-b5e6-96231b3b80d8
Attempt to combine CONCAT_VECTORS nodes, which we only really have pre-legalization.
This encourages a lot of X86ISD::SUBV_BROADCAST generation, so I've added SimplifyDemandedVectorEltsForTargetNode handling for this at the same time.
The X86ISD::VTRUNC regression in shuffle-vs-trunc-256-widen.ll will be handled in a future commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356064 91177308-0d34-0410-b5e6-96231b3b80d8
This follows similar logic in the ARM and Mips backends, and allows the free
use of s0 in functions without a dedicated frame pointer. The changes in
callee-saved-gprs.ll most clearly show the effect of this patch.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356063 91177308-0d34-0410-b5e6-96231b3b80d8
Note that s0 need not be marked reserved if the frame pointer isn't used. For
the ILP32 and LP64 soft float ABIS that are currently support, all FPRs are
always considered temporaries.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356061 91177308-0d34-0410-b5e6-96231b3b80d8
Simon Pilgrim