MSVC found the bare "make_unique" invocation ambiguous (between std::
and llvm:: versions). Explicitly qualifying the call with llvm:: should
hopefully fix it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357750 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Strings in minidump files are stored as a 32-bit length field, giving
the length of the string in *bytes*, which is followed by the
appropriate number of UTF16 code units. The string is also supposed to
be null-terminated, and the null-terminator is not a part of the length
field. This patch:
- adds support for reading these strings out of the minidump file (this
implementation does not depend on proper null-termination)
- adds support for writing them to a minidump file
- using the previous two pieces implements proper (de)serialization of
the CSDVersion field of the SystemInfo stream. Previously, this was
only read/written as hex, and no attempt was made to access the
referenced string -- now this string is read and written correctly.
The changes are tested via yaml2obj|obj2yaml round-trip as well as a
unit test which checks the corner cases of the string deserialization
logic.
Reviewers: jhenderson, zturner, clayborg
Subscribers: llvm-commits, aprantl, markmentovai, amccarth, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59775
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357749 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Now CVType and CVSymbol are effectively type-safe wrappers around
ArrayRef<uint8_t>. Make the kind() accessor load it from the
RecordPrefix, which is the same for types and symbols.
Reviewers: zturner, aganea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60018
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357658 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, YAML has the following syntax for describing the symbols:
Symbols:
Local:
LocalSymbol1:
...
LocalSymbol2:
...
...
Global:
GlobalSymbol1:
...
Weak:
...
GNUUnique:
I.e. symbols are grouped by their bindings. That is not very convenient,
because:
It does not allow to set a custom binding, what can be useful for producing
broken/special outputs for test cases. Adding a new binding would require to
change a syntax (what we observed when added GNUUnique recently).
It does not allow to change the order of the symbols in .symtab/.dynsym,
i.e. currently all Local symbols are placed first, then Global, Weak and GNUUnique
are following, but we are not able to change the order.
It is not consistent. Binding is just one of the properties of the symbol,
we do not group them by other properties.
It makes the code more complex that it can be. This patch shows it can be simplified
with the change performed.
The patch changes the syntax to just:
Symbols:
Symbol1:
...
Symbol2:
...
...
With that, we are able to work with the binding field just like with any other symbol property.
Differential revision: https://reviews.llvm.org/D60122
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357595 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds the code needed to parse a minidump file into the
MinidumpYAML model, and the necessary glue code so that obj2yaml can
recognise the minidump files and process them.
Reviewers: jhenderson, zturner, clayborg
Subscribers: mgorny, lldb-commits, amccarth, markmentovai, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59634
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@357469 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356753 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356610 91177308-0d34-0410-b5e6-96231b3b80d8
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@356247 91177308-0d34-0410-b5e6-96231b3b80d8
This is for tweaking SHT_SYMTAB sections.
Their sh_info contains the (number of symbols + 1) usually.
But for creating invalid inputs for test cases it would be convenient
to allow explicitly override this field from YAML.
Differential revision: https://reviews.llvm.org/D58779
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@355193 91177308-0d34-0410-b5e6-96231b3b80d8
This allows tools to parse/dump the architecture specific tags
like DT_MIPS_*, DT_PPC64_* and DT_HEXAGON_*
Also fixes a bug in DynamicTags.def which was revealed in this patch.
Differential revision: https://reviews.llvm.org/D58667
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354876 91177308-0d34-0410-b5e6-96231b3b80d8
Recently, support was added to yaml2obj to allow dynamic sections to
have a list of entries, to make it easier to write tests with dynamic
sections. However, this change also removed the ability to provide
custom contents to the dynamic section, making it hard to test
malformed contents (e.g. because the section is not a valid size to
contain an array of entries). This change reinstates this. An error is
emitted if raw content and dynamic entries are both specified.
Reviewed by: grimar, ruiu
Differential Review: https://reviews.llvm.org/D58543
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354770 91177308-0d34-0410-b5e6-96231b3b80d8
In order to test tool handling of invalid section indexes, I need to
create an object containing such an invalid section index. I could
create a hex-edited binary, but having the ability to use yaml2obj is
preferable. Prior to this change, yaml2obj would reject any explicit
section indexes less than SHN_LORESERVE. This patch changes it to allow
any value.
I had to change the test to use llvm-readelf instead of llvm-readobj,
because llvm-readobj does not like invalid section indexes. I've also
expanded the test to show that the most common SHN_* values are accepted
(SHN_UNDEF, SHN_ABS, SHN_COMMON).
Reviewed by: grimar, jakehehrlich
Differential Revision: https://reviews.llvm.org/D58445
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354566 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Rename MemoryIndex to InitFlags and implement logic for determining
data segment layout in ObjectYAML and MC. Also adds a "passive" flag
for the .section assembler directive although this cannot be assembled
yet because the assembler does not support data sections.
Reviewers: sbc100, aardappel, aheejin, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57938
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354397 91177308-0d34-0410-b5e6-96231b3b80d8
yaml2obj/obj2yaml previously supported SHT_LOOS, SHT_HIOS, and
SHT_LOPROC for section types. These are simply values that delineate a
range and don't really make sense as valid values. For example if a
section has type value 0x70000000, obj2yaml shouldn't print this value
as SHT_LOPROC. Additionally, this was missing the three other range
markers (SHT_HIPROC, SHT_LOUSER and SHT_HIUSER).
This change removes these three range markers. It also adds support for
specifying the type as an integer, to allow section types that LLVM
doesn't know about.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D58383
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354344 91177308-0d34-0410-b5e6-96231b3b80d8
Fix:
Replace
assert(!IO.getContext() && "The IO context is initialized already");
with
assert(IO.getContext() && "The IO context is not initialized");
(this was introduced in r354329, where I tried to quickfix the darwin BB
and seems copypasted the assert from the wrong place).
Original commit message:
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354335 91177308-0d34-0410-b5e6-96231b3b80d8
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@354328 91177308-0d34-0410-b5e6-96231b3b80d8
ELFYAML.h contains a `Section` class which is a base for a few other
sections classes that are used for mapping different section types.
`Section` has a `StringRef Info` field used for storing sh_info.
At the same time, sh_info has very different meanings for sections and
cannot be processed in a similar way generally,
for example ELFDumper does not handle it in `dumpCommonSection`
but do that in `dumpGroup` and `dumpCommonRelocationSection` respectively.
At this moment, we have and handle it as a string, because that was possible for
the current use case. But also it can simply be a number:
For SHT_GNU_verdef is "The number of version definitions within the section."
The patch moves `Info` field out to be able to have it as a number.
With that change, each class will be able to decide what type and purpose
of the sh_info field it wants to use.
I also had to edit 2 test cases. This is because patch fixes a bug. Previously we
accepted yaml files with Info fields for all sections (for example, for SHT_DYNSYM too).
But we do not handle it and the resulting objects had zero sh_info fields set for
such sections. Now it is accepted only for sections that supports it.
Differential revision: https://reviews.llvm.org/D58054
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353810 91177308-0d34-0410-b5e6-96231b3b80d8
The second and the last place it seems.
Error was:
[ 4%] Building CXX object lib/Support/CMakeFiles/LLVMSupport.dir/Error.cpp.o
/Users/buildslave/as-bldslv9_new/lld-x86_64-darwin13/llvm.src/lib/ObjectYAML/ELFYAML.cpp:993:15: error: unused variable 'Object' [-Werror,-Wunused-variable]
const auto *Object = static_cast<ELFYAML::Object *>(IO.getContext());
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353609 91177308-0d34-0410-b5e6-96231b3b80d8
yaml2obj previously only recognised standard STT_* names, and didn't
allow arbitrary numbers. This change allows the user to specify a number
for the type instead. It also adds a test to verify the existing
behaviour for obj2yaml for unkown symbol types.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57822
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@353315 91177308-0d34-0410-b5e6-96231b3b80d8
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351636 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Everything before the word "version" is the tool, and everything after
the word "version" is the version.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@351399 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This adds support for the 'event section' specified in the exception
handling proposal. (This was named 'exception section' first, but later
renamed to 'event section' to take possibilities of other kinds of
events into consideration. But currently we only store exception info in
this section.)
The event section is added between the global section and the export
section. This is for ease of validation per request of the V8 team.
This patch:
- Creates the event symbol type, which is a weak symbol
- Makes 'throw' instruction take the event symbol '__cpp_exception'
- Adds relocation support for events
- Adds WasmObjectWriter / WasmObjectFile (Reader) support
- Adds obj2yaml / yaml2obj support
- Adds '.eventtype' printing support
Reviewers: dschuff, sbc100, aardappel
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54096
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@346825 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: Adds the necessary support to lib/ObjectYAML and fixes SIMD
calls to allow the tests to work. Also removes some dead code that
would otherwise have to have been updated.
Reviewers: aheejin, dschuff, sbc100
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@342689 91177308-0d34-0410-b5e6-96231b3b80d8
Pavel Labath