llvm/test/DebugInfo/X86/op_deref.ll
Keno Fischer bae9026417 Clean up the processing of dbg.value in various places
Summary:
First up is instcombine, where in the dbg.declare -> dbg.value conversion,
the llvm.dbg.value needs to be called on the actual loaded value, rather
than the address (since the whole point of this transformation is to be
able to get rid of the alloca). Further, now that that's cleaned up, we
can remove a hack in the backend, that would add an implicit OP_deref if
the argument to dbg.value was an alloca. This stems from before the
existence of DIExpression and is no longer necessary since the deref can
be expressed explicitly.

Now, in order to make sure that the tests pass with this change, we need to
correct the printing of DEBUG_VALUE comments to take into account the
expression, which wasn't taken into account before.

Unfortunately, for both these changes, there were a number of incorrect
test cases (mostly the wrong number of DW_OP_derefs, but also a couple
where the test itself was broken more badly). aprantl and I have gone
through and adjusted these test case in order to make them pass with
these fixes and in some cases to make sure they're actually testing
what they are meant to test.

Reviewers: aprantl

Subscribers: dsanders

Differential Revision: http://reviews.llvm.org/D14186

git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@256077 91177308-0d34-0410-b5e6-96231b3b80d8
2015-12-19 02:02:44 +00:00

112 lines
5.2 KiB
LLVM

; RUN: llc -O0 -mtriple=x86_64-apple-darwin < %s -filetype=obj \
; RUN: | llvm-dwarfdump -debug-dump=info - \
; RUN: | FileCheck %s -check-prefix=CHECK -check-prefix=DWARF4
; RUN: llc -O0 -mtriple=x86_64-apple-darwin < %s -filetype=obj -dwarf-version=3 \
; RUN: | llvm-dwarfdump -debug-dump=info - \
; RUN: | FileCheck %s -check-prefix=CHECK -check-prefix=DWARF3
; FIXME: The location here needs to be fixed, but llvm-dwarfdump doesn't handle
; DW_AT_location lists yet.
; DWARF4: DW_AT_location [DW_FORM_sec_offset] (0x00000000)
; FIXME: The location here needs to be fixed, but llvm-dwarfdump doesn't handle
; DW_AT_location lists yet.
; DWARF3: DW_AT_location [DW_FORM_data4] (0x00000000)
; CHECK-NOT: DW_TAG
; CHECK: DW_AT_name [DW_FORM_strp] ( .debug_str[0x00000067] = "vla")
; Unfortunately llvm-dwarfdump can't unparse a list of DW_AT_locations
; right now, so we check the asm output:
; RUN: llc -O0 -mtriple=x86_64-apple-darwin %s -o - -filetype=asm | FileCheck %s -check-prefix=ASM-CHECK
; vla should have a register-indirect address at one point.
; ASM-CHECK: DEBUG_VALUE: vla <- [%RCX+0]
; ASM-CHECK: DW_OP_breg2
; RUN: llvm-as %s -o - | llvm-dis - | FileCheck %s --check-prefix=PRETTY-PRINT
; PRETTY-PRINT: DIExpression(DW_OP_deref)
define void @testVLAwithSize(i32 %s) nounwind uwtable ssp !dbg !5 {
entry:
%s.addr = alloca i32, align 4
%saved_stack = alloca i8*
%i = alloca i32, align 4
store i32 %s, i32* %s.addr, align 4
call void @llvm.dbg.declare(metadata i32* %s.addr, metadata !10, metadata !DIExpression()), !dbg !11
%0 = load i32, i32* %s.addr, align 4, !dbg !12
%1 = zext i32 %0 to i64, !dbg !12
%2 = call i8* @llvm.stacksave(), !dbg !12
store i8* %2, i8** %saved_stack, !dbg !12
%vla = alloca i32, i64 %1, align 16, !dbg !12
call void @llvm.dbg.declare(metadata i32* %vla, metadata !14, metadata !30), !dbg !18
call void @llvm.dbg.declare(metadata i32* %i, metadata !19, metadata !DIExpression()), !dbg !20
store i32 0, i32* %i, align 4, !dbg !21
br label %for.cond, !dbg !21
for.cond: ; preds = %for.inc, %entry
%3 = load i32, i32* %i, align 4, !dbg !21
%4 = load i32, i32* %s.addr, align 4, !dbg !21
%cmp = icmp slt i32 %3, %4, !dbg !21
br i1 %cmp, label %for.body, label %for.end, !dbg !21
for.body: ; preds = %for.cond
%5 = load i32, i32* %i, align 4, !dbg !23
%6 = load i32, i32* %i, align 4, !dbg !23
%mul = mul nsw i32 %5, %6, !dbg !23
%7 = load i32, i32* %i, align 4, !dbg !23
%idxprom = sext i32 %7 to i64, !dbg !23
%arrayidx = getelementptr inbounds i32, i32* %vla, i64 %idxprom, !dbg !23
store i32 %mul, i32* %arrayidx, align 4, !dbg !23
br label %for.inc, !dbg !25
for.inc: ; preds = %for.body
%8 = load i32, i32* %i, align 4, !dbg !26
%inc = add nsw i32 %8, 1, !dbg !26
store i32 %inc, i32* %i, align 4, !dbg !26
br label %for.cond, !dbg !26
for.end: ; preds = %for.cond
%9 = load i8*, i8** %saved_stack, !dbg !27
call void @llvm.stackrestore(i8* %9), !dbg !27
ret void, !dbg !27
}
declare void @llvm.dbg.declare(metadata, metadata, metadata) nounwind readnone
declare i8* @llvm.stacksave() nounwind
declare void @llvm.stackrestore(i8*) nounwind
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!29}
!0 = distinct !DICompileUnit(language: DW_LANG_C99, producer: "clang version 3.2 (trunk 156005) (llvm/trunk 156000)", isOptimized: false, emissionKind: 1, file: !28, enums: !1, retainedTypes: !1, subprograms: !3, globals: !1, imports: !1)
!1 = !{}
!3 = !{!5}
!5 = distinct !DISubprogram(name: "testVLAwithSize", line: 1, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 2, file: !28, scope: !6, type: !7, variables: !1)
!6 = !DIFile(filename: "bar.c", directory: "/Users/echristo/tmp")
!7 = !DISubroutineType(types: !8)
!8 = !{null, !9}
!9 = !DIBasicType(tag: DW_TAG_base_type, name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
!10 = !DILocalVariable(name: "s", line: 1, arg: 1, scope: !5, file: !6, type: !9)
!11 = !DILocation(line: 1, column: 26, scope: !5)
!12 = !DILocation(line: 3, column: 13, scope: !13)
!13 = distinct !DILexicalBlock(line: 2, column: 1, file: !28, scope: !5)
!14 = !DILocalVariable(name: "vla", line: 3, scope: !13, file: !6, type: !15)
!15 = !DICompositeType(tag: DW_TAG_array_type, align: 32, baseType: !9, elements: !16)
!16 = !{!17}
!17 = !DISubrange(count: -1)
!18 = !DILocation(line: 3, column: 7, scope: !13)
!19 = !DILocalVariable(name: "i", line: 4, scope: !13, file: !6, type: !9)
!20 = !DILocation(line: 4, column: 7, scope: !13)
!21 = !DILocation(line: 5, column: 8, scope: !22)
!22 = distinct !DILexicalBlock(line: 5, column: 3, file: !28, scope: !13)
!23 = !DILocation(line: 6, column: 5, scope: !24)
!24 = distinct !DILexicalBlock(line: 5, column: 27, file: !28, scope: !22)
!25 = !DILocation(line: 7, column: 3, scope: !24)
!26 = !DILocation(line: 5, column: 22, scope: !22)
!27 = !DILocation(line: 8, column: 1, scope: !13)
!28 = !DIFile(filename: "bar.c", directory: "/Users/echristo/tmp")
!29 = !{i32 1, !"Debug Info Version", i32 3}
!30 = !DIExpression(DW_OP_deref)