OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307722 91177308-0d34-0410-b5e6-96231b3b80d8
1. The available program storage region of the red zone to compilers is 288
bytes rather than 244 bytes.
2. The formula for negative number alignment calculation should be
y = x & ~(n-1) rather than y = (x + (n-1)) & ~(n-1).
Differential Revision: https://reviews.llvm.org/D34337
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307672 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds on to the exploitation added by https://reviews.llvm.org/D33510.
This now catches build vector nodes where the inputs are coming from sign
extended vector extract elements where the indices used by the vector extract
are not correct. We can still use the new hardware instructions by adding a
shuffle to move the elements to the correct indices. I introduced a new PPCISD
node here because adding a vector_shuffle and changing the elements of the
vector_extracts was getting undone by another DAG combine.
Commit on behalf of Zaara Syeda (syzaara@ca.ibm.com)
Differential Revision: https://reviews.llvm.org/D34009
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@307169 91177308-0d34-0410-b5e6-96231b3b80d8
The existing check lines were more flexible, but these are
small enough tests that there shouldn't be much question
about register allocation. I've been hand-modifying this
file as I change the CGP memcmp expansion, but that's
more error-prone and time-consuming than just running the
update script.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306861 91177308-0d34-0410-b5e6-96231b3b80d8
This patch fixes a verification error with -verify-machineinstrs while expanding __tls_get_addr by not creating ADJCALLSTACKUP and ADJCALLSTACKDOWN if there is another ADJCALLSTACKUP in this basic block since nesting ADJCALLSTACKUP/ADJCALLSTACKDOWN is not allowed.
Here, ADJCALLSTACKUP and ADJCALLSTACKDOWN are created as a fence for instruction scheduling to avoid _tls_get_addr is scheduled before mflr in the prologue (https://bugs.llvm.org//show_bug.cgi?id=25839). So if another ADJCALLSTACKUP exists before _tls_get_addr, we do not need to create a new ADJCALLSTACKUP.
Differential Revision: https://reviews.llvm.org/D34347
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306678 91177308-0d34-0410-b5e6-96231b3b80d8
As noted in D34071, there are some IR optimization opportunities that could be
handled by normal IR passes if this expansion wasn't happening so late in CGP.
Regardless of that, it seems wasteful to knowingly produce suboptimal IR here,
so I'm proposing this change:
%s = sub i32 %x, %y
%r = icmp ne %s, 0
=>
%r = icmp ne %x, %y
Changing the predicate to 'eq' mimics what InstCombine would do, so that's just
an efficiency improvement if we decide this expansion should happen sooner.
The fact that the PowerPC backend doesn't eliminate the 'subf.' might be
something for PPC folks to investigate separately.
Differential Revision: https://reviews.llvm.org/D34416
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306471 91177308-0d34-0410-b5e6-96231b3b80d8
When SelectionDAG merges consecutive stores and loads in MergeConsecutiveStores, it does not set dereferenceable flag for a created load instruction. This results in an assertion failure if SelectionDAG commonizes this load instruction with other load instructions, as well as it may miss optimization opportunities.
This patch sat dereferenceable flag for the newly created load instruction if all the load instructions to be merged are dereferenceable.
Differential Revision: https://reviews.llvm.org/D34679
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306404 91177308-0d34-0410-b5e6-96231b3b80d8
PowerPC backend does not pass the current optimization level to SelectionDAGISel and so SelectionDAGISel works with the default optimization level regardless of the current optimization level.
This patch makes the PowerPC backend set the optimization level correctly.
Differential Revision: https://reviews.llvm.org/D34615
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306367 91177308-0d34-0410-b5e6-96231b3b80d8
When SelectionDAG expands memcpy (or memmove) call into a sequence of load and store instructions, it disregards dereferenceable flag even the source pointer is known to be dereferenceable.
This results in an assertion failure if SelectionDAG commonizes a load instruction generated for memcpy with another load instruction for the source pointer.
This patch makes SelectionDAG to set the dereferenceable flag for the load instructions properly to avoid the assertion failure.
Differential Revision: https://reviews.llvm.org/D34467
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@306209 cdac9f57-aa62-4fd3-8940-286f4534e8a0
Define target hook isReallyTriviallyReMaterializable() to explicitly specify
PowerPC instructions that are trivially rematerializable. This will allow
the MachineLICM pass to accurately identify PPC instructions that should always
be hoisted.
Differential Revision: https://reviews.llvm.org/D34255
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305932 91177308-0d34-0410-b5e6-96231b3b80d8
This does some improvements/cleanup to the recently introduced
scavengeRegisterBackwards() functionality:
- Rewrite findSurvivorBackwards algorithm to use the existing
LiveRegUnit::accumulateBackward() code. This also avoids the Available
and Candidates bitset and just need 1 LiveRegUnit instance
(= 1 bitset).
- Pick registers in allocation order instead of register number order.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305817 91177308-0d34-0410-b5e6-96231b3b80d8
This is the last step needed to avoid regressions for x86 before we flip the switch to allow
expansion of the smallest set of memcpy() via CGP. The DAG version checks for constant strings,
so we need to do that here too.
FWIW, the 2 constant test is not handled by LibCallSimplifier::optimizeMemCmp() because that
code is limited to 8-bit constant arrays. LibCallSimplifier will also fail to optimize some 1
constant tests because its alignment requirements are too strict (shouldn't require alignment
for a constant operand).
Differential Revision: https://reviews.llvm.org/D34071
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305734 91177308-0d34-0410-b5e6-96231b3b80d8
Re-apply r276044/r279124/r305516. Fixed a problem where we would refuse
to place spills as the very first instruciton of a basic block and thus
artifically increase pressure (test in
test/CodeGen/PowerPC/scavenging.mir:spill_at_begin)
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305625 91177308-0d34-0410-b5e6-96231b3b80d8
Revert because of reports of some PPC input starting to spill when it
was predicted that it wouldn't and no spillslot was reserved.
This reverts commit r305516.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305566 91177308-0d34-0410-b5e6-96231b3b80d8
Re-apply r276044/r279124. Trying to reproduce or disprove the ppc64
problems reported in the stage2 build last time, which I cannot
reproduce right now.
This is a variant of scavengeRegister() that works for
enterBasicBlockEnd()/backward(). The benefit of the backward mode is
that it is not affected by incomplete kill flags.
This patch also changes
PrologEpilogInserter::doScavengeFrameVirtualRegs() to use the register
scavenger in backwards mode.
Differential Revision: http://reviews.llvm.org/D21885
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305516 91177308-0d34-0410-b5e6-96231b3b80d8
Add condition for MachineLICM to safely hoist instructions that utilize
non constant registers that are reserved.
On PPC, global variable access is done through the table of contents (TOC)
which is always in register X2. The ABI reserves this register in any
functions that have calls or access global variables.
A call through a function pointer involves saving, changing and restoring
this register around the call and thus MachineLICM does not consider it to
be invariant. We can however guarantee the register is preserved across the
call and thus is invariant.
Differential Revision: https://reviews.llvm.org/D33562
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305490 91177308-0d34-0410-b5e6-96231b3b80d8
Power9 has instructions that will reverse the bytes within an element for all
sizes (half-word, word, double-word and quad-word). These can be used for the
vec_revb builtins in altivec.h. However, we implement these to match vector
shuffle nodes as that will cover both the builtins and vector shuffles that
occur in the SDAG through other means.
Differential Revision: https://reviews.llvm.org/D33690
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305214 91177308-0d34-0410-b5e6-96231b3b80d8
Note that if we need the result of both the divide and the modulo then we
compute the modulo based on the result of the divide and not using the new
hardware instruction.
Commit on behalf of STEFAN PINTILIE.
Differential Revision: https://reviews.llvm.org/D33940
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305210 91177308-0d34-0410-b5e6-96231b3b80d8
In PPCBoolRetToInt bool value is changed to i32 type. On ppc64 it may introduce an extra zero extension for the return value. This patch changes the integer type to i64 to avoid the zero extension on ppc64.
This patch fixed PR32442.
Differential Revision: https://reviews.llvm.org/D31407
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@305001 91177308-0d34-0410-b5e6-96231b3b80d8
In SDAG, we don't expand libcalls with a nobuiltin attribute.
It's not clear if that's correct from the existing code comment:
"Don't do the check if marked as nobuiltin for some reason."
...adding a test here either way to show that there is currently
a different behavior implemented in the CGP-based expansion.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304991 91177308-0d34-0410-b5e6-96231b3b80d8
The test diff for PowerPC shows we can better optimize if this case is one block.
For x86, there's would be a substantial difference if CGP expansion was enabled because branches are assumed
cheap and SDAG can't optimize across blocks.
Instead of this:
_cmp_eq8:
movq (%rdi), %rax
cmpq (%rsi), %rax
je LBB23_1
## BB#2: ## %res_block
movl $1, %ecx
jmp LBB23_3
LBB23_1:
xorl %ecx, %ecx
LBB23_3: ## %endblock
xorl %eax, %eax
testl %ecx, %ecx
sete %al
retq
We get this:
cmp_eq8:
movq (%rdi), %rcx
xorl %eax, %eax
cmpq (%rsi), %rcx
sete %al
retq
And that matches the optimal codegen that we get from the current expansion in SelectionDAGBuilder::visitMemCmpCall().
If this looks right, then I just need to confirm that vector-sized expansion will work from here, and we can enable
CGP memcmp() expansion for x86. Ie, we'll bypass the power-of-2 special cases currently optimized in SDAG because we
can lower the IR produced here optimally.
Differential Revision: https://reviews.llvm.org/D34005
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304987 91177308-0d34-0410-b5e6-96231b3b80d8
This could be viewed as another shortcoming of the DAGCombiner:
when both operands of a compare are zexted from the same source
type, we should be able to compare the original types.
The effect on PowerPC perf is likely unnoticeable, but there's a
visible regression for x86 if we feed the suboptimal IR for memcmp
expansion to the DAG:
_cmp_eq4_zexted_to_i64:
movl (%rdi), %ecx
movl (%rsi), %edx
xorl %eax, %eax
cmpq %rdx, %rcx
sete %al
_cmp_eq4_better:
movl (%rdi), %ecx
xorl %eax, %eax
cmpl (%rsi), %ecx
sete %al
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304923 91177308-0d34-0410-b5e6-96231b3b80d8
I'd like to enable CGP memcmp expansion for x86, but the output from CGP would regress the
special cases (memcmp(x,y,N) != 0 for N=1,2,4,8,16,32 bytes) that we already handle.
I'm not sure if we'll actually be able to produce the optimal code given the block-at-a-time
limitation in the DAG. We might have to just avoid those special-cases here in CGP. But
regardless of that, I think this is a win for the more general cases.
http://rise4fun.com/Alive/cbQ
Differential Revision: https://reviews.llvm.org/D33963
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304849 91177308-0d34-0410-b5e6-96231b3b80d8
3 of the tests were testing exactly the same thing: memcmp(x, y, 16) != 0.
I changed that to test 4, 7, and 16 bytes, so we can see how those differ.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304838 91177308-0d34-0410-b5e6-96231b3b80d8
This pass allows to run the register scavenging independently of
PrologEpilogInserter to allow targeted testing.
Also adds some basic register scavenging tests.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304606 91177308-0d34-0410-b5e6-96231b3b80d8
This patch does an inline expansion of memcmp.
It changes the memcmp library call into an inline expansion when the size is
known at compile time and is under a target specified threshold.
This expansion is implemented in CodeGenPrepare and expands into straight line
code. The target specifies a maximum load size and the expansion works by using
this size to load the two sources, compare, and exit early if a difference is
found. It also has a special case when the memcmp result is used in a compare
to zero equality.
Differential Revision: https://reviews.llvm.org/D28637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@304313 91177308-0d34-0410-b5e6-96231b3b80d8
