Summary:
In a .symver assembler directive like:
.symver name, name2@@nodename
"name2@@nodename" should get the same symbol binding as "name".
While the ELF object writer is updating the symbol binding for .symver
aliases before emitting the object file, not doing so when the module
inline assembly is handled by the RecordStreamer is causing the wrong
behavior in *LTO mode.
E.g. when "name" is global, "name2@@nodename" must also be marked as
global. Otherwise, the symbol is skipped when iterating over the LTO
InputFile symbols (InputFile::Symbol::shouldSkip). So, for example,
when performing any *LTO via the gold-plugin, the versioned symbol
definition is not recorded by the plugin and passed back to the
linker. If the object was in an archive, and there were no other symbols
needed from that object, the object would not be included in the final
link and references to the versioned symbol are undefined.
The llvm-lto2 tests added will give an error about an unused symbol
resolution without the fix.
Reviewers: rafael, pcc
Reviewed By: pcc
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30485
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@297332 91177308-0d34-0410-b5e6-96231b3b80d8
other tables. Providing a helpful error message to what the error is and
where the error occurred based on which opcode it was associated with.
There have been handful of bug fixes dealing with bad bind info in
object files, r294021 and r249845, which only put a band aid on the
problem after a bad bind table was created after unpacking from
its compact info. In these cases a bind table should have never been
created and an error should have simply been generated.
This change puts in place the plumbing to allow checking and returning
of an error when the compact info is unpacked. This follows the model
of iterators that can fail that Lang Hanes designed when fixing the problem
for bad archives r275316 (or r275361).
This change uses one of the existing test cases that now causes an
error instead of printing <<bad library ordinal>> after a bad bind table
is created. The error uses the offset into the opcode table as shown with
the macOS dyldinfo(1) tool to indicate where the error is and which
opcode and which parameter is in error.
For example the exiting test case has this lazy binding opcode table:
% dyldinfo -opcodes test/tools/llvm-objdump/Inputs/bad-ordinal.macho-x86_64
…
lazy binding opcodes:
0x0000 BIND_OPCODE_SET_SEGMENT_AND_OFFSET_ULEB(0x02, 0x00000010)
0x0002 BIND_OPCODE_SET_DYLIB_ORDINAL_IMM(2)
In the test case the binary only has one library so setting the library
ordinal to the value of 2 in the BIND_OPCODE_SET_DYLIB_ORDINAL_IMM
opcode at 0x0002 above is an error. This now produces this error message:
% llvm-objdump -lazy-bind bad-ordinal.macho-x86_64
…
llvm-objdump: 'bad-ordinal.macho-x86_64': truncated or malformed object (for BIND_OPCODE_SET_DYLIB_ORDINAL_ULEB bad library ordinal: 2 (max 1) for opcode at: 0x2)
This change provides the plumbing for the error handling and one example
of an error message. Other error checks and test cases will be added in follow
on commits.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@296527 91177308-0d34-0410-b5e6-96231b3b80d8
For whatever reason ld64 requires that member headers (not the member
themselves) should be aligned. The only way to do that is to edit the
previous member so that it ends at an aligned boundary.
Since modifying data put in an archive is an undesirable property,
llvm-ar should only do it when it is absolutely necessary.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295765 91177308-0d34-0410-b5e6-96231b3b80d8
Changed format specifiers to use format macro constant for pointer type.
Moved width part of format specifier in the correct place for formatting members a and b.
Added a unit test to confirm the output.
Differential Revision: https://reviews.llvm.org/D28957
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295173 91177308-0d34-0410-b5e6-96231b3b80d8
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293634 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292824 91177308-0d34-0410-b5e6-96231b3b80d8
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292500 91177308-0d34-0410-b5e6-96231b3b80d8
An ELFObjectFile can now create SubtargetFeatures from the available
ARM build attributes, in a similar manner to MIPS. I've moved the
MIPS code into its own function and the ARM handler also has a
separate function.
Differential Revision: https://reviews.llvm.org/D28291
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292403 91177308-0d34-0410-b5e6-96231b3b80d8
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292366 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291911 91177308-0d34-0410-b5e6-96231b3b80d8
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291898 91177308-0d34-0410-b5e6-96231b3b80d8
Decompressor intention is to reduce duplication of code.
Currently LLD has own implementation of decompressor
for compressed debug sections.
This class helps to avoid it and share the code.
LLD patch for reusing it is D28106
Differential revision: https://reviews.llvm.org/D28105
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291675 91177308-0d34-0410-b5e6-96231b3b80d8
The Mach-O command line flag like "-arch armv7m" does not match the
arch name part of its llvm Triple which is "thumbv7m-apple-darwin”.
I think the best way to fix this is to have
llvm::object::MachOObjectFile::getArchTriple() optionally return the
name of the Mach-O arch flag that would be used with -arch that
matches the CPUType and CPUSubType. Then change
llvm::object::MachOUniversalBinary::ObjectForArch::getArchTypeName()
to use that and change it to getArchFlagName() as the type name is
really part of the Triple and the -arch flag name is a Mach-O thing
for a specific Triple with a specific Mcpu value.
rdar://29663637
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290001 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: The relocation is missing mask so an address that has non-zero bits in 47:43 may overwrite the register number. (Frequently shows up as target register changed to `xzr`....)
Reviewers: t.p.northover, lhames
Subscribers: davide, aemerson, rengolin, llvm-commits
Differential Revision: https://reviews.llvm.org/D27609
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289880 91177308-0d34-0410-b5e6-96231b3b80d8
This class represents a symbol table built from in-memory IR. It provides
access to GlobalValues and should only be used if such access is required
(e.g. in the LTO implementation). We will eventually change IRObjectFile
to read from a bitcode symbol table rather than using ModuleSymbolTable,
so it would not be able to expose the module.
Differential Revision: https://reviews.llvm.org/D27073
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288319 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
When using thin archives, and processing the same archive multiple times, we were mangling existing entries. The root cause is that we were calling computeRelativePath() more than once. Here, we only call it when adding new members to an archive.
Note that D27218 changes the way thin archives are printed, and will break the new unit test included here. Depending on which one lands first, the other will need to be slightly modified.
Reviewers: rafael, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D27217
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288280 91177308-0d34-0410-b5e6-96231b3b80d8
Change the IRObjectFile symbol iterator to be a pointer into a vector of
PointerUnions representing either IR symbols or asm symbols.
This change is in preparation for a future change for supporting multiple
modules in an IRObjectFile. Although it causes an increase in memory
consumption, we can deal with that issue separately by introducing a bitcode
symbol table.
Differential Revision: https://reviews.llvm.org/D26928
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287845 91177308-0d34-0410-b5e6-96231b3b80d8
- teach RelocVisitor to recognize bpf relocations
- fix AsmInfo->PointerSize to make sure dwarf is emitted correctly
- add a test for the above
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287521 91177308-0d34-0410-b5e6-96231b3b80d8
This has two advantages:
1) We slowly move away from ErrorOr to the new handling interface,
in the hope of having an uniform error handling in LLVM, eventually.
2) We're starting to have *meaningful* error messages for invalid
object ELF files, rather than a generic "parse error". At some point
we should include also the offset to improve the quality of the
diagnostic.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287081 91177308-0d34-0410-b5e6-96231b3b80d8
Sometimes, llvm-symbolizer gives wrong results due to incorrect sizes of some symbols. The reason for that was an incorrectly sorted array in computeSymbolSizes. The comparison function used subtraction of unsigned types, which is incorrect. Let's change this to return explicit -1 or 1.
Differential Revision: https://reviews.llvm.org/D26537
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287028 91177308-0d34-0410-b5e6-96231b3b80d8
The philosophy of the error checking in libObject for Mach-O files
is that the constructor will check the load commands so for their
tables the offsets and sizes are properly contained in the file.
But there is no checking of the entries of any of the tables.
For the contents of the tables themselves the methods accessing
the contents of the entries return errors as needed. In some
cases this however makes it difficult or cumbersome to produce
a good error message which would include the tool name, file name,
archive member, and name of the architecture of a slice of a universal file
the error occurred in.
So idea is that there will be a method to check a table which can
be called up front before using it allowing a good error message
to be produced before a table is used. And if only verification of
the Mach-O file and its tables are wanted a new possible method
checkAllTables() could be added to call all of the methods to
check all the tables at some time when such methods exist.
The checkSymbolTable() is the first of such methods to check
one of the Mach-O file tables. This method initially will used in
llvm-objdump’s DisassembleMachO() routine before it gets the
section and symbol information. As if there are problems with
the symbol table currently the error is first encountered by the
bool operator() in the SymbolSorter() struct which passed to
std::sort(). In this case there is no context as to the file name
the symbol which results a poor error message:
LLVM ERROR: truncated or malformed object (bad string index: 22 for symbol at index 1)
with the added call to the checkSymbolTable() method the
error message includes the tool name and file name:
llvm-objdump: 'macho-invalid-symbol-strx': truncated or malformed object (bad string table index: 22 past the end of string table, for symbol at index 1)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286887 91177308-0d34-0410-b5e6-96231b3b80d8
The functions getBitcodeTargetTriple(), isBitcodeContainingObjCCategory(),
getBitcodeProducerString() and hasGlobalValueSummary() now return errors
via their return value rather than via the diagnostic handler.
To make this work, re-implement these functions using non-member functions
so that they can be used without the LLVMContext required by BitcodeReader.
Differential Revision: https://reviews.llvm.org/D26532
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@286623 91177308-0d34-0410-b5e6-96231b3b80d8
All error checking now happens when the information is needed. The
only thing left is the minimum size of the buffer and that can be just
a precondition. I will add an ErrorOr create method in a followup
commit.
Also don't store a pointer to the Header, since it is just a trivial
cast.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285961 91177308-0d34-0410-b5e6-96231b3b80d8
This adds versions of getSectionIndex, getSection and getSymbol that
instead of a Elf_Shdr take the content of that section.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285932 91177308-0d34-0410-b5e6-96231b3b80d8
