This test introduced in r287368 is failing on powerpc for reasons
unrelated to branch probabilities. See PR31062.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@287375 91177308-0d34-0410-b5e6-96231b3b80d8
tracksSubRegLiveness only depends on the Subtarget and a cl::opt, there
is not need to change it or save/parse it in a .mir file.
Make the field const and move the initialization LiveIntervalAnalysis to the
MachineRegisterInfo constructor. Also cleanup some code and fix some
instances which better use MachineRegisterInfo::subRegLivenessEnabled() instead
of TargetSubtargetInfo::enableSubRegLiveness().
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@279676 91177308-0d34-0410-b5e6-96231b3b80d8
Selected: the InstructionSelect pass ran and all pre-isel generic
instructions have been eliminated; i.e., all instructions are now
target-specific or non-pre-isel generic instructions (e.g., COPY).
Since only pre-isel generic instructions can have generic virtual register
operands, this also means that all generic virtual registers have been
constrained to virtual registers (assigned to register classes) and that
all sizes attached to them have been eliminated.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277482 91177308-0d34-0410-b5e6-96231b3b80d8
RegBankSelected: the RegBankSelect pass ran and all generic virtual
registers have been assigned to a register bank.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277475 91177308-0d34-0410-b5e6-96231b3b80d8
Legalized: The MachineLegalizer ran; all pre-isel generic instructions
have been legalized, i.e., all instructions are now one of:
- generic and always legal (e.g., COPY)
- target-specific
- legal pre-isel generic instructions.
This lets us enforce certain invariants across passes.
This property is GlobalISel-specific, but is always available.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@277470 91177308-0d34-0410-b5e6-96231b3b80d8
Currently the MIR framework prints all its outputs (errors and actual
representation) on stderr.
This patch fixes that by printing the regular output in the output
specified with -o.
Differential Revision: http://reviews.llvm.org/D22251
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@275314 91177308-0d34-0410-b5e6-96231b3b80d8
Previously we could run only one machine pass with the run-pass option.
With that patch, we can now specify several passes with several run-pass
options (or just one option with a list of comma separated passes) and
llc will build the related pipeline.
This is great to test the interaction of two passes that are not
necessarily next to each other in the pipeline, or play with pass
ordering.
Now, we should be at parity with opt for the flexibility of running
passes.
Note: I also moved the run pass option from CommandFlags.h to llc.cpp
because, really, this is needed only there!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272356 91177308-0d34-0410-b5e6-96231b3b80d8
This is made possible by removing an assert in llc that assumed
MIRParser::parseLLVMModule would exit on error. MIRParser's documentation states
that it returns null if a parsing error occurs, so there's no reason to assert.
We can instead just fall through to where the check for a module is performed
and exit if it is null.
This commit is part of the clean-up after r269655.
Fixes PR27770
Differential Revision: http://reviews.llvm.org/D20371
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@272254 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h, and fixed an UB in the new change.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269655 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Reapplied after fixing the LLDB build that was broken due to the new
DiagnosticSeverity in LLVMContext.h.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269563 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r269428, as it breaks the LLDB build. We need to
understand how to change LLDB in the same way as LLC before landing this
again.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269432 91177308-0d34-0410-b5e6-96231b3b80d8
Without a diagnostic handler installed, llc's behaviour is to exit on the first
error that it encounters. This is very different from the behaviour of clang
and other front ends, which try to gather as many errors as possible before
exiting.
This commit adds a diagnostic handler to llc, allowing it to find and report
more than one error. The old behaviour is preserved under a flag (-exit-on-error).
Some of the tests fail with the new diagnostic handler, so they have to use the
new flag in order to run under the previous behaviour. Some of these are known
bugs, others need further investigation. Ideally, we should fix the tests and
remove the flag at some point in the future.
Patch by Diana Picus.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@269428 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Without this, this command
$ llvm-run llc -stop-after machine-cp -o - <( echo '' )
outputs an error, because we close stdout twice -- once when closing the
file opened for "-o", and again when closing outs().
Also clarify in the outs() definition that you can't ever call it if you
want to open your own raw_fd_ostream on stdout.
Reviewers: jroelofs, tstellarAMD
Subscribers: jholewinski, qcolombet, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D17422
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@261286 91177308-0d34-0410-b5e6-96231b3b80d8
This commit modifies the way the machine basic blocks are serialized - now the
machine basic blocks are serialized using a custom syntax instead of relying on
YAML primitives. Instead of using YAML mappings to represent the individual
machine basic blocks in a machine function's body, the new syntax uses a single
YAML block scalar which contains all of the machine basic blocks and
instructions for that function.
This is an example of a function's body that uses the old syntax:
body:
- id: 0
name: entry
instructions:
- '%eax = MOV32r0 implicit-def %eflags'
- 'RETQ %eax'
...
The same body is now written like this:
body: |
bb.0.entry:
%eax = MOV32r0 implicit-def %eflags
RETQ %eax
...
This syntax change is motivated by the fact that the bundled machine
instructions didn't map that well to the old syntax which was using a single
YAML sequence to store all of the machine instructions in a block. The bundled
machine instructions internally use flags like BundledPred and BundledSucc to
determine the bundles, and serializing them as MI flags using the old syntax
would have had a negative impact on the readability and the ease of editing
for MIR files. The new syntax allows me to serialize the bundled machine
instructions using a block construct without relying on the internal flags,
for example:
BUNDLE implicit-def dead %itstate, implicit-def %s1 ... {
t2IT 1, 24, implicit-def %itstate
%s1 = VMOVS killed %s0, 1, killed %cpsr, implicit killed %itstate
}
This commit also converts the MIR testcases to the new syntax. I developed
a script that can convert from the old syntax to the new one. I will post the
script on the llvm-commits mailing list in the thread for this commit.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@244982 91177308-0d34-0410-b5e6-96231b3b80d8
