Before this patch we happened to visit twice, one when scanning
MDNodes and the other one while visiting the function. Remove
the explicit call to visitDISubprogram there, so we don't emit
the same error twice in case the verifier fail and we save some
time when running it.
Thanks to Justin Bogner for the report and Adrian for the quick
review!
PR: 31995
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295537 91177308-0d34-0410-b5e6-96231b3b80d8
A line number doesn't make much sense if you don't say where it's
from. Add a verifier check for this and update some tests that had
bogus debug info.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295516 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
This is an issue both with regular and Thin LTO. When we link together
a DICompileUnit that is marked NoDebug (e.g when compiling with -g0
but applying an AutoFDO profile, which requires location tracking
in the compiler) and a DICompileUnit with debug emission enabled,
we can have failures during dwarf debug generation. Specifically,
when we have inlined from the NoDebug compile unit into the debug
compile unit, we can fail during construction of the abstract and
inlined scope DIEs. This is because the SPMap does not include NoDebug
CUs (they are skipped in the debug_compile_units_iterator).
This patch fixes the failures by skipping locations from NoDebug CUs
when extracting lexical scopes.
Reviewers: dblaikie, aprantl
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D29765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@295384 91177308-0d34-0410-b5e6-96231b3b80d8
On ELF every section can have a corresponding section symbol. When in
an assembly file we have
.quad .text
the '.text' refers to that symbol.
The way we used to handle them is to leave .text an undefined symbol
until the very end when the object writer would map them to the
actual section symbol.
The problem with that is that anything before the end would see an
undefined symbol. This could result in bad diagnostics
(test/MC/AArch64/label-arithmetic-diags-elf.s), or incorrect results
when using the asm streamer (est/MC/Mips/expansion-jal-sym-pic.s).
Fixing this will also allow using the section symbol earlier for
setting sh_link of SHF_METADATA sections.
This patch includes a few hacks to avoid changing our behaviour when
handling conflicts between section symbols and other symbols. I
reported pr31850 to track that.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293936 91177308-0d34-0410-b5e6-96231b3b80d8
Summary: test/DebugInfo/Generic/gmlt_profiling.ll will also pass on darwin, so we should remove the XFAIL in the test.
Reviewers: dblaikie, aprantl
Reviewed By: dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29431
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@293840 91177308-0d34-0410-b5e6-96231b3b80d8
Revision 289661 introduced the function DILocation::getMergedLocation for
merging of debug locations. At the time is was simply a stub which always
returned no location. This patch modifies getMergedLocation to handle the
case where the two locations are the same or can't be discriminated.
Differential Revision: https://reviews.llvm.org/D28521
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291809 91177308-0d34-0410-b5e6-96231b3b80d8
This reapplies r289828 (reverted in r289833 as it broke the address sanitizer). The
debugloc is now only set when the instruction is not a call, as this causes the
verifier to assert (the inliner requires an inlinable callsite to have a debug loc
if the caller and callee have debug info).
Original commit message:
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Original review: https://reviews.llvm.org/D27590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290973 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes the issue exposed in PR31393, where we weren't trying
sufficiently hard to diagnose bad TBAA metadata.
This does reduce the variety in the error messages we print out, but I
think the tradeoff of verifying more, simply and quickly overrules the
need for more helpful error messags here.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290713 91177308-0d34-0410-b5e6-96231b3b80d8
This patch renumbers the metadata nodes in debug info testcases after
https://reviews.llvm.org/D26769. This is a separate patch because it
causes so much churn. This was implemented with a python script that
pipes the testcases through llvm-as - | llvm-dis - and then goes
through the original and new output side-by side to insert all
comments at a close-enough location.
Differential Revision: https://reviews.llvm.org/D27765
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290292 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades and a change
to the Bitcode record for DIGlobalVariable, that makes upgrading the
old format unambiguous also for variables without DIExpressions.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290153 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit 289920 (again).
I forgot to implement a Bitcode upgrade for the case where a DIGlobalVariable
has not DIExpression. Unfortunately it is not possible to safely upgrade
these variables without adding a flag to the bitcode record indicating which
version they are.
My plan of record is to roll the planned follow-up patch that adds a
unit: field to DIGlobalVariable into this patch before recomitting.
This way we only need one Bitcode upgrade for both changes (with a
version flag in the bitcode record to safely distinguish the record
formats).
Sorry for the churn!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289982 91177308-0d34-0410-b5e6-96231b3b80d8
One more attempt to re-commit the patch r285355, which I had to revert in r285362, because some tests were failing (the reason is because the size of the line_table varied depending on the full file name).
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289925 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
This reapplies r289902 with additional testcase upgrades.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289920 91177308-0d34-0410-b5e6-96231b3b80d8
This patch implements PR31013 by introducing a
DIGlobalVariableExpression that holds a pair of DIGlobalVariable and
DIExpression.
Currently, DIGlobalVariables holds a DIExpression. This is not the
best way to model this:
(1) The DIGlobalVariable should describe the source level variable,
not how to get to its location.
(2) It makes it unsafe/hard to update the expressions when we call
replaceExpression on the DIGLobalVariable.
(3) It makes it impossible to represent a global variable that is in
more than one location (e.g., a variable with multiple
DW_OP_LLVM_fragment-s). We also moved away from attaching the
DIExpression to DILocalVariable for the same reasons.
<rdar://problem/29250149>
https://llvm.org/bugs/show_bug.cgi?id=31013
Differential Revision: https://reviews.llvm.org/D26769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289902 91177308-0d34-0410-b5e6-96231b3b80d8
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Differential Revision: https://reviews.llvm.org/D27590
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289828 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are compares that have a RHS constant,
instcombine will try to pull them through the phi node, combining them into
a single operation. When it does this, the debug location of the new op
should be the merged debug locations of the phi node arguments.
Patch 8 of 8 for D26256. Folding of a compare that has a RHS constant.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289704 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are a binop with a RHS constant, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the new op should be the
merged debug locations of the phi node arguments.
Patch 7 of 8 for D26256. Folding of a binop with RHS constant.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289699 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are a cast, instcombine will try to pull
them through the phi node, combining them into a single cast. When it does
this, the debug location of the new cast should be the merged debug locations
of the phi node arguments.
Patch 6 of 8 for D26256. Folding of a cast operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289693 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are a load, instcombine will try to pull
them through the phi node, combining them into a single load. When it does
this, the debug location of the new load should be the merged debug locations
of the phi node arguments.
Patch 5 of 8 for D26256. Folding of a load operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289688 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are getelementptr, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the new getelementptr
should be the merged debug locations of the phi node arguments.
Patch 4 of 8 for D26256. Folding of a getelementptr operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289684 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are of the same operation, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the operation should
be the merged debug locations of the phi node arguments.
Patch 3 of 8 for D26256. Folding of a compare operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289681 91177308-0d34-0410-b5e6-96231b3b80d8
If all the operands to a phi node are of the same operation, instcombine
will try to pull them through the phi node, combining them into a single
operation. When it does this, the debug location of the operation should
be the merged debug locations of the phi node arguments.
Patch 2 of 8 for D26256. Folding of a binary operation.
Differential Revision: https://reviews.llvm.org/D26256
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289679 91177308-0d34-0410-b5e6-96231b3b80d8
When a function F is inlined, InlineFunction extends the debug location of every
instruction inlined from F by adding an InlinedAt.
However, if an instruction has a 'null' debug location, InlineFunction would
propagate the callsite debug location to it. This behavior existed since
revision 210459.
Revision 210459 was originally committed specifically to workaround the lack of
debug information for instructions inlined from intrinsic functions (which are
usually declared with attributes `__always_inline__, __nodebug__`).
The problem with revision 210459 is that it doesn't make any sort of distinction
between instructions inlined from a 'nodebug' function and instructions which
are inlined from a function built with debug info. This issue may lead to
incorrect stepping in the debugger.
This patch works under the assumption that a nodebug function does not have a
DISubprogram. When a function F is inlined into another function G,
InlineFunction checks if F has debug info associated with it.
For nodebug functions, the InlineFunction logic is unchanged (i.e. it would
still propagate the callsite debugloc to the inlined instructions). Otherwise,
InlineFunction no longer propagates the callsite debug location.
Differential Revision: https://reviews.llvm.org/D27462
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288895 91177308-0d34-0410-b5e6-96231b3b80d8
so we can stop using DW_OP_bit_piece with the wrong semantics.
The entire back story can be found here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20161114/405934.html
The gist is that in LLVM we've been misinterpreting DW_OP_bit_piece's
offset field to mean the offset into the source variable rather than
the offset into the location at the top the DWARF expression stack. In
order to be able to fix this in a subsequent patch, this patch
introduces a dedicated DW_OP_LLVM_fragment operation with the
semantics that we used to apply to DW_OP_bit_piece, which is what we
actually need while inside of LLVM. This patch is complete with a
bitcode upgrade for expressions using the old format. It does not yet
fix the DWARF backend to use DW_OP_bit_piece correctly.
Implementation note: We discussed several options for implementing
this, including reserving a dedicated field in DIExpression for the
fragment size and offset, but using an custom operator at the end of
the expression works just fine and is more efficient because we then
only pay for it when we need it.
Differential Revision: https://reviews.llvm.org/D27361
rdar://problem/29335809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288683 91177308-0d34-0410-b5e6-96231b3b80d8
In r266692, we made it possible to emit linkage names for just inlined
functions, putting the attribute on the abstract origin. Make sure we
don't think the linkage-name was already emitted on a declaration.
Differential Revision: http://reviews.llvm.org/D27320
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@288450 91177308-0d34-0410-b5e6-96231b3b80d8
In the past the compiler always emitted .debug_line version 2, though some opcodes from DWARF 3 (e.g. DW_LNS_set_prologue_end, DW_LNS_set_epilogue_begin or DW_LNS_set_isa) and from DWARF 4 could be emitted by the compiler.
This patch changes version information of .debug_line to exactly match the DWARF version. For .debug_line version 4, a new field maximum_operations_per_instruction is emitted.
Differential Revision: https://reviews.llvm.org/D16697
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285355 91177308-0d34-0410-b5e6-96231b3b80d8
When the loop exit condition is canonicalized as a != compaison, reuse the
debug location of the original (non canonical) comparison.
Before this patch, the debug location of the new icmp was obtained from the
loop latch terminator. This patch fixes the issue by correctly setting the
IRBuilder's "current debug location" to the location of the original compare.
Differential Revision: https://reviews.llvm.org/D25953
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285185 91177308-0d34-0410-b5e6-96231b3b80d8
When indvars widened an induction variable, the debug location for the loop
increment computation was incorrectly set equal to the debug loc of the loop
latch terminator.
This patch fixes the issue by propagating the correct location from the
original loop increment instruction to the new widened increment.
Differential Revision: https://reviews.llvm.org/D25872
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@285083 91177308-0d34-0410-b5e6-96231b3b80d8
This came out of a discussion in https://reviews.llvm.org/D25285.
There used to be various other llvm.dbg.* nodes, but we don't support
upgrading them and we want to reserve the namespace for future uses.
This also removes an entirely obsolete and bitrotted testcase for PR7662.
Reapplies 283390 with a forgotten testcase.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283400 91177308-0d34-0410-b5e6-96231b3b80d8
This came out of a discussion in https://reviews.llvm.org/D25285.
There used to be various other llvm.dbg.* nodes, but we don't support
upgrading them and we want to reserve the namespace for future uses.
This also removes an entirely obsolete and bitrotted testcase for PR7662.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@283390 91177308-0d34-0410-b5e6-96231b3b80d8
This patch reverses the edge from DIGlobalVariable to GlobalVariable.
This will allow us to more easily preserve debug info metadata when
manipulating global variables.
Fixes PR30362. A program for upgrading test cases is attached to that
bug.
Differential Revision: http://reviews.llvm.org/D20147
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@281284 91177308-0d34-0410-b5e6-96231b3b80d8
