If a virtual register is copied and another copy was already
seen, replace with the previous copy. This only handles the
simplest cases for now.
This pattern shows up from various operand restrictions
AMDGPU has which require inserting copies depending
on the register class of the operands.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248611 91177308-0d34-0410-b5e6-96231b3b80d8
This fixes a select error when the i64 source was also
bitcasted to v2i32 in the original source.
Instead of awkwardly trying to select the modified source value and
the store, replace before isel begins.
Uses a worklist to avoid possible problems from mutating the DAG,
although it seems to work OK without it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248589 91177308-0d34-0410-b5e6-96231b3b80d8
These were all using the default 32-bit VALU write class,
but the i64/f64 compares are half rate.
I'm not sure this is really correct, because they are still using
the write to VALU write class, even though they really write
to the SALU.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248582 91177308-0d34-0410-b5e6-96231b3b80d8
We now emit the compiler generated divide by zero check that was needed for the
MSVC routines. We construct a psuedo-instruction for the DBZ check as the
operation requires splitting up the BB. For the 64-bit operations, we need to
custom expand the node as we need to insert the DBZ check and then emit the
libcall to the appropriate name. Because this is target specific, it seemed
better to reproduce the expansion operation from the target-agnostic type
legalization rather than sink this there to avoid the duplication. The division
library calls now match MSVC semantically.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248561 91177308-0d34-0410-b5e6-96231b3b80d8
Fix for D12561 - we weren't correctly ensuring that the base element for extension was moved to start on a boundary suitable for UNPCKL/H
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248536 91177308-0d34-0410-b5e6-96231b3b80d8
These are necessary for implementing mem_fence for
OpenCL 2.0.
The VI assembler tests are disabled since it seems to be
using the wrong encoding or opcode.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248532 91177308-0d34-0410-b5e6-96231b3b80d8
Allow a target to do something other than search for copies
that will avoid cross register bank copies.
Implement for SI by only rewriting the most basic copies,
so it should look through anything like a subregister extract.
I'm not entirely satisified with this because it seems like
eliminating a reg_sequence that isn't fully used should work
generically for all targets without them having to override
something. However, it seems to be tricky to have a simple
implementation of this without rewriting to invalid kinds
of subregister copies on some targets.
I'm not sure if there is currently a generic way to easily check
if a subregister index would be valid for the current use.
The current set of TargetRegisterInfo::get*Class functions don't
quite behave like I would expect (e.g. getSubClassWithSubReg
returns the maximal register class rather than the minimal), so
I'm not sure how to make the generic test keep searching if
SrcRC:SrcSubReg is a valid replacement for DefRC:DefSubReg. Making
the default implementation to check for simple copies breaks
a variety of ARM and x86 tests by producing illegal subregister uses.
The ARM tests are not actually changed since it should still be using
the same sharesSameRegisterFile implementation, this just relaxes
them to not check for specific registers.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248478 91177308-0d34-0410-b5e6-96231b3b80d8
If the stores are storing values from loads which partially
alias the stores, we could end up placing the merged loads
and stores on the same chain which has the potential to break.
Each store may have a different chain dependency on only some
of the original loads. Create a new TokenFactor to capture all
of the required dependencies of the stores rather than assuming
all stores can use the same chain.
The testcase is a situation where this happens, although
it does not have an observable change from this. The DAG nodes
just happened to not be reordered before despite this missing
chain dependency.
This is based on an off-list report for an out of tree target
which regressed due to r246307 and I haven't managed to find a case
where the nodes do end up reordered with an in tree target.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248468 91177308-0d34-0410-b5e6-96231b3b80d8
Instead of always inserting a copy in case
the super register is itself a subregister,
only extract to the super reg class if this is
actually the case.
This shouldn't really change codegen, but
makes looking at the output of SIFixSGPRCopies
easier to read.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248467 91177308-0d34-0410-b5e6-96231b3b80d8
This time, the issue is that we weren't accounting for the possibility that
aligned DPRs could have been stored after the final "push" in a prologue. When
that happened we effectively moved a "sub sp, #N" from below the aligned stores
to above them, and everything went to pot.
To make it worse, I'd actually committed something testing that we produced
wrong code, so the test update is tiny.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248437 91177308-0d34-0410-b5e6-96231b3b80d8
This patch changes the order of GEPs generated by Splitting GEPs
pass, specially when one of the GEPs has constant and the base is
loop invariant, then we will generate the GEP with constant first
when beneficial, to expose more cases for LICM.
If originally Splitting GEP generate the following:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 %3
%uglygep7 = getelementptr i8, i8* %uglygep, i64 1032
...
Now it genereates:
do.body.i:
%idxprom.i = sext i32 %shr.i to i64
%2 = bitcast %typeD* %s to i8*
%3 = shl i64 %idxprom.i, 2
%uglygep = getelementptr i8, i8* %2, i64 1032
%uglygep7 = getelementptr i8, i8* %uglygep, i64 %3
...
For no-loop cases, the original way of generating GEPs seems to
expose more CSE cases, so we don't change the logic for no-loop
cases, and only limit our change to the specific case we are
interested in.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248420 91177308-0d34-0410-b5e6-96231b3b80d8
This patches removes the x86.sse41.pmovsx* intrinsics, provides a suitable upgrade path and updates relevant tests to sign extend a subvector instead.
LLVM counterpart to D12835
Differential Revision: http://reviews.llvm.org/D13002
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248368 91177308-0d34-0410-b5e6-96231b3b80d8
We may have subregister defs which are unused but not discovered and
cleaned up prior to liveness analysis. This creates multiple connected
components in the resulting live range which are forbidden in the
MachineVerifier because they would unnecesarily constrain the register
allocator. Rewrite those dead definitions to define a newly created
virtual register.
Differential Revision: http://reviews.llvm.org/D13035
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248335 91177308-0d34-0410-b5e6-96231b3b80d8
ARM counterpart to r248291:
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248294 91177308-0d34-0410-b5e6-96231b3b80d8
In the comparison failure block of a cmpxchg expansion, the initial
ldrex/ldxr will not be followed by a matching strex/stxr.
On ARM/AArch64, this unnecessarily ties up the execution monitor,
which might have a negative performance impact on some uarchs.
Instead, release the monitor in the failure block.
The clrex instruction was designed for this: use it.
Also see ARMARM v8-A B2.10.2:
"Exclusive access instructions and Shareable memory locations".
Differential Revision: http://reviews.llvm.org/D13033
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248291 91177308-0d34-0410-b5e6-96231b3b80d8
The C standard has historically not specified whether or not these functions should raise the inexact flag. Traditionally on Darwin, these functions *did* raise inexact, and the llvm lowerings followed that conventions. n1778 (C bindings for IEEE-754 (2008)) clarifies that these functions should not set inexact. This patch brings the lowerings for arm64 and x86 in line with the newly specified behavior. This also lets us fold some logic into TD patterns, which is nice.
Differential Revision: http://reviews.llvm.org/D12969
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248266 91177308-0d34-0410-b5e6-96231b3b80d8
This patch generalizes the lowering of shuffles as zero extensions to allow extensions that don't start from the first element. It now recognises extensions starting anywhere in the lower 128-bits or at the start of any higher 128-bit lane.
The motivation was to reduce the number of high cost pshufb calls, but it also improves the SSE2 case as well.
Differential Revision: http://reviews.llvm.org/D12561
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248250 91177308-0d34-0410-b5e6-96231b3b80d8
This patch adds support for combining patterns such as (FMUL(FADD(1.0, x), y)) and (FMUL(FSUB(x, 1.0), y)) to their FMA equivalents.
This is useful in particular for linear interpolation cases such as (FADD(FMUL(x, t), FMUL(y, FSUB(1.0, t))))
Differential Revision: http://reviews.llvm.org/D13003
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248210 91177308-0d34-0410-b5e6-96231b3b80d8
The vext pseudo-instruction takes the number of elements that need to be
extracted, not the number of bytes. Hence, use the number of elements
directly instead of scaling them with a factor.
Reviewers: Silviu Baranga, James Molloy
(not reflected in the differential revision)
Differential Revision: http://reviews.llvm.org/D12974
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248208 91177308-0d34-0410-b5e6-96231b3b80d8
The ISD::FPOW and ISD::FSINCOS opcodes default to Legal, but there
is no legal instruction for those on SystemZ. This could cause
LLVM internal errors. Fixed by setting the operation action to
Expand for those opcodes.
Also added test cases for all other LLVM IR intrinsics that should
generate a library call. (Those already work correctly since the
default operation action is fine.)
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248180 91177308-0d34-0410-b5e6-96231b3b80d8
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248169 91177308-0d34-0410-b5e6-96231b3b80d8
Now that we have fast vector CTPOP implementations we can use this to speed up vector CTTZ using the pattern (cttz(x) = ctpop((x & -x) - 1))
Additionally, for AVX512CD that provides lzcnt instructions we can use the pattern (cttz_undef(x) = (width - 1) - ctlz(x & -x))
Differential Revision: http://reviews.llvm.org/D12663
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248091 91177308-0d34-0410-b5e6-96231b3b80d8
In if-conversion, there is a utility function MergeBlocks() that is used to merge blocks. However, when new edges are built in this function the edge weight is either not provided or not updated properly, leading to a modified CFG with incorrect edge weights. This patch corrects this issue.
Differential Revision: http://reviews.llvm.org/D12513
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248030 91177308-0d34-0410-b5e6-96231b3b80d8
In ARMBaseInstrInfo::isProfitableToIfCvt(), there is a simple cost model in which the number of cycles is scaled by a probability to estimate the cost. However, when the number of cycles is small (which is usually the case), there is a precision issue after the computation. To avoid this issue, this patch scales those cycles by 1024 (chosen to make the multiplication a litter faster) before they are scaled by the probability. Other variables are also scaled up for the final comparison.
Differential Revision: http://reviews.llvm.org/D12742
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248018 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
For bitfield insert OR matching, check both operands for larger pattern
first before checking for smaller pattern.
Add pattern for unsigned bitfield insert-in-zero done with SHL+AND.
Resolves PR21631.
Reviewers: jmolloy, t.p.northover
Subscribers: aemerson, rengolin, llvm-commits, mcrosier
Differential Revision: http://reviews.llvm.org/D12908
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@248006 91177308-0d34-0410-b5e6-96231b3b80d8
- Strenghten the logic to be sure we hoist the restore point out of the current
loop. (The fixes a bug with infinite loop, added as part of the patch.)
- Walk over the exit blocks of the current loop to conver to the desired restore
point in one iteration of the update loop.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@247958 91177308-0d34-0410-b5e6-96231b3b80d8
