Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292516 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since first commit attempt:
* Added missing guards
* Added more missing guards
* Found and fixed a use-after-free bug involving Twine locals
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292478 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
In this function, virtual registers can be introduced (for example
through calls to emitThumbRegPlusImmInReg). doScavengeFrameVirtualRegs
will replace those virtual registers with concrete registers later on
in PrologEpilogInserter, which sets NoVRegs again.
This patch fixes the Codegen/Thumb/segmented-stacks.ll test case which
failed with expensive checks.
https://llvm.org/bugs/show_bug.cgi?id=27484
Reviewers: rnk, bkramer, olista01
Reviewed By: olista01
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D28829
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292372 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Changes since last commit:
The new tablegen pass is now correctly guarded by LLVM_BUILD_GLOBAL_ISEL and
this should fix the buildbots however it may not be the whole fix. The previous
buildbot failures suggest there may be a memory bug lurking that I'm unable to
reproduce (including when using asan) or spot in the source. If they re-occur
on this commit then I'll need assistance from the bot owners to track it down.
Reviewers: t.p.northover, ab, rovka, qcolombet
Reviewed By: qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292367 91177308-0d34-0410-b5e6-96231b3b80d8
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292366 91177308-0d34-0410-b5e6-96231b3b80d8
This reverts commit r292210, as it broke the Thumb buldbot with:
clang-5.0: error: the clang compiler does not support '-fxray-instrument
on thumbv7-unknown-linux-gnueabihf'.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292357 91177308-0d34-0410-b5e6-96231b3b80d8
Some platforms (notably iOS) use a different calling convention for unnamed vs
named parameters in varargs functions, so we need to keep track of this
information when translating calls.
Since not many platforms are involved, the guts of the special handling is in
the ValueHandler class (with a generic implementation that should work for most
targets).
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292283 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Emission of XRay table was occasionally disabled for Arm32, but this bug was not then detected because earlier (also by mistake) testing of XRay was occasionally disabled on 32-bit Arm targets. This patch should fix that problem and detect such problems in the future.
This patch is one of a series, see also
- https://reviews.llvm.org/D28623
Reviewers: rengolin, dberris
Reviewed By: dberris
Subscribers: llvm-commits, aemerson, rengolin, dberris, iid_iunknown
Differential Revision: https://reviews.llvm.org/D28624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292210 91177308-0d34-0410-b5e6-96231b3b80d8
Several buildbots encountered a crash in tablegen when building this commit.
Reverting while I investigate the cause.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292136 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Adds a RegisterBank tablegen class that can be used to declare the register
banks and an associated tablegen pass to generate the necessary code.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, rengolin, kristof.beyls, vkalintiris, mgorny, dberris, llvm-commits, rovka
Differential Revision: https://reviews.llvm.org/D27338
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@292132 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291911 91177308-0d34-0410-b5e6-96231b3b80d8
GCC changes the CC between the user-code and the builtins based on the
value of `-target` rather than `-mfloat-abi`. When a HF target is used,
the VFP variant of the AAPCS CC is used. Otherwise, the AAPCS variant
is used. In all cases, the AEABI functions use the AAPCS CC. Adjust
the calling convention based on the target.
Resolves PR30543!
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291909 91177308-0d34-0410-b5e6-96231b3b80d8
With some minor manual fixes for using function_ref instead of
std::function. No functional change intended.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291904 91177308-0d34-0410-b5e6-96231b3b80d8
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291898 91177308-0d34-0410-b5e6-96231b3b80d8
For AddDefaultT1CC, we add a new helper t1CondCodeOp, which creates the
appropriate register operand. For AddNoT1CC, we use the existing condCodeOp
helper - we only had two uses of AddNoT1CC, so at this point it's probably not
worth having yet another helper just for them.
Differential Revision: https://reviews.llvm.org/D28603
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291894 91177308-0d34-0410-b5e6-96231b3b80d8
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291890 91177308-0d34-0410-b5e6-96231b3b80d8
Switch some additional library call setup to be table driven. This
makes it more immediately obvious what the library call looks like.
This is important for ARM since the calling conventions for the builtins
change based on the target/libcall name. NFC
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291789 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
The register bank is now entirely initialized in the constructor. However,
we still have the hardcoded number of register classes which will be
dealt with in the TableGen patch (D27338) since we do not have access
to this information to resolve this at this stage. The number of register
classes is known to the TRI and to TableGen but the RegisterBank
constructor is too early for the former and too late for the latter.
This will be fixed when the data is tablegen-erated.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27809
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291770 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
Refactor the RegisterBank initialization to use static data. This requires
GlobalISel implementations to rewrite calls to createRegisterBank() and
addRegBankCoverage() into a call to setRegBankData().
Out of tree targets can use diff 4 of D27807
(https://reviews.llvm.org/D27807?id=84117) to have addRegBankCoverage() dump
the register classes and other data that needs to be provided to
setRegBankData(). This is the method that was used to generate the static data
in this patch.
Tablegen-eration of this static data will follow after some refactoring.
Reviewers: t.p.northover, ab, rovka, qcolombet
Subscribers: aditya_nandakumar, kristof.beyls, vkalintiris, llvm-commits, dberris
Differential Revision: https://reviews.llvm.org/D27807
Differential Revision: https://reviews.llvm.org/D27808
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291768 91177308-0d34-0410-b5e6-96231b3b80d8
updated instructions:
pmulld, pmullw, pmulhw, mulsd, mulps, mulpd, divss, divps, divsd, divpd, addpd and subpd.
special optimization case which replaces pmulld with pmullw\pmulhw\pshuf seq.
In case if the real operands bitwidth <= 16.
Differential Revision: https://reviews.llvm.org/D28104
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291657 91177308-0d34-0410-b5e6-96231b3b80d8
This code seems to be target dependent which may not be the same for all targets.
Passed the decision whether the given stride is complex or not to the target by sending stride information via SCEV to getAddressComputationCost instead of 'IsComplex'.
Specifically at X86 targets we dont see any significant address computation cost in case of the strided access in general.
Differential Revision: https://reviews.llvm.org/D27518
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@291106 91177308-0d34-0410-b5e6-96231b3b80d8
Summary:
No need to have this per-architecture. While there, unify 32-bit ARM's
behaviour with what changed elsewhere and start function names lowercase
as per the coding standards. Individual entry emission code goes to the
entry's own class.
Fully tested on amd64, cross-builds on both ARMs and PowerPC.
Reviewers: dberris
Subscribers: aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D28209
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290858 91177308-0d34-0410-b5e6-96231b3b80d8
This allows lowering i8 and i16 arguments if they can fit in the registers. Note
that the lowering is incomplete - ABI extensions are handled in a subsequent
patch.
(Last part of)
Differential Revision: https://reviews.llvm.org/D27704
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290106 91177308-0d34-0410-b5e6-96231b3b80d8
This adds support for lowering more than 4 arguments (although still i32 only).
It uses the handleAssignments / ValueHandler infrastructure extracted from
the AArch64 backend in r288658.
Differential Revision: https://reviews.llvm.org/D27195
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@290098 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Recommiting with fix to avoid forming vld1dup if the type of the load
doesn't match the type of the vdup (see
https://llvm.org/bugs/show_bug.cgi?id=31404).
Differential Revision: https://reviews.llvm.org/D27694
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289972 91177308-0d34-0410-b5e6-96231b3b80d8
Add the minimal support necessary to select a function that returns the sum of
two i32 values.
This includes some support for argument/return lowering of i32 values through
registers, as well as the handling of copy and add instructions throughout the
GlobalISel pipeline.
Differential Revision: https://reviews.llvm.org/D26677
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289940 91177308-0d34-0410-b5e6-96231b3b80d8
Add two public methods to ARMTargetLowering: CCAssignFnForCall and
CCAssignFnForReturn, which are just calling the already existing private method
CCAssignFnForNode. These will come in handy for GlobalISel on ARM.
We also replace all calls to CCAssignFnForNode in ARMISelLowering.cpp, because
the new methods are friendlier to the reader.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289932 91177308-0d34-0410-b5e6-96231b3b80d8
MachineLegalizer used to be the name of both the class and the member,
causing GCC errors. r276522 fixed that by renaming the member to just
'Legalizer'. The 'class' workaround isn't necessary anymore; drop it.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289848 91177308-0d34-0410-b5e6-96231b3b80d8
This is essentially a recommit of r285893, but with a correctness fix. The
problem of the original commit was that this:
bic r5, r7, #31
cbz r5, .LBB2_10
got rewritten into:
lsrs r5, r7, #5
beq .LBB2_10
The result in destination register r5 is not the same and this is incorrect
when r5 is not dead. So this fix includes checking the uses of the AND
destination register. And also, compared to the original commit, some regression
tests didn't need changing anymore because of this extra check.
For completeness, this was the original commit message:
For the common pattern (CMPZ (AND x, #bitmask), #0), we can do some more
efficient instruction selection if the bitmask is one consecutive sequence of
set bits (32 - clz(bm) - ctz(bm) == popcount(bm)).
1) If the bitmask touches the LSB, then we can remove all the upper bits and
set the flags by doing one LSLS.
2) If the bitmask touches the MSB, then we can remove all the lower bits and
set the flags with one LSRS.
3) If the bitmask has popcount == 1 (only one set bit), we can shift that bit
into the sign bit with one LSLS and change the condition query from NE/EQ to
MI/PL (we could also implement this by shifting into the carry bit and
branching on BCC/BCS).
4) Otherwise, we can emit a sequence of LSLS+LSRS to remove the upper and lower
zero bits of the mask.
1-3 require only one 16-bit instruction and can elide the CMP. 4 requires two
16-bit instructions but can elide the CMP and doesn't require materializing a
complex immediate, so is also a win.
Differential Revision: https://reviews.llvm.org/D27761
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289794 91177308-0d34-0410-b5e6-96231b3b80d8
This implements execute-only support for ARM code generation, which
prevents the compiler from generating data accesses to code sections.
The following changes are involved:
* Add the CodeGen option "-arm-execute-only" to the ARM code generator.
* Add the clang flag "-mexecute-only" as well as the GCC-compatible
alias "-mpure-code" to enable this option.
* When enabled, literal pools are replaced with MOVW/MOVT instructions,
with VMOV used in addition for floating-point literals. As the MOVT
instruction is required, execute-only support is only available in
Thumb mode for targets supporting ARMv8-M baseline or Thumb2.
* Jump tables are placed in data sections when in execute-only mode.
* The execute-only text section is assigned section ID 0, and is
marked as unreadable with the SHF_ARM_PURECODE flag with symbol 'y'.
This also overrides selection of ELF sections for globals.
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289784 91177308-0d34-0410-b5e6-96231b3b80d8
Given that INSERT_VECTOR_ELT operates on D registers anyway, combining
64-bit vectors into a 128-bit vector is basically free. Therefore, try
to split BUILD_VECTOR nodes before giving up and lowering them to a series
of INSERT_VECTOR_ELT instructions. Sometimes this allows dramatically
better lowerings; see testcases for examples. Inspired by similar code
in the x86 backend for AVX.
Differential Revision: https://reviews.llvm.org/D27624
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289706 91177308-0d34-0410-b5e6-96231b3b80d8
Currently, there are substantial problems forming vld1_dup even if the
VDUP survives legalization. The lack of an actual node
leads to terrible results: not only can we not form post-increment vld1_dup
instructions, but we form scalar pre-increment and post-increment
loads which force the loaded value into a GPR. This patch fixes that
by combining the vdup+load into an ARMISD node before DAGCombine
messes it up.
Also includes a crash fix for vld2_dup (see testcase @vld2dupi8_postinc_variable).
Differential Revision: https://reviews.llvm.org/D27694
git-svn-id: https://llvm.org/svn/llvm-project/llvm/trunk@289703 91177308-0d34-0410-b5e6-96231b3b80d8
